LINUX.ORG.RU

CUPS не видит принтер Fedora 21

 


0

1

Здравствуйте! Прошу помощи, сам не шарю( Принтер Zebra lsusb

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0a5f:0000 Zebra 
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 04f3:0234 Elan Microelectronics Corp. 
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
dmesg | tail -n 20
[   64.635310] Bluetooth: BNEP filters: protocol multicast
[   64.635326] Bluetooth: BNEP socket layer initialized
[   64.726775] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[   86.961534] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[  430.947168] perf interrupt took too long (2512 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 2067.818995] perf interrupt took too long (5004 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[ 2949.924845] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 6549.465752] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 6566.896452] snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 9994.478670] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[10149.538240] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[13425.703207] usb 3-1: USB disconnect, device number 2
[13425.703684] usblp0: removed
[13430.799064] usb 3-1: new full-speed USB device number 3 using uhci_hcd
[13430.972057] usb 3-1: New USB device found, idVendor=0a5f, idProduct=0000
[13430.972065] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[13430.972070] usb 3-1: Product: ZTC 
[13430.972075] usb 3-1: Manufacturer: Zebra Technologies
[13430.972080] usb 3-1: SerialNumber: 0000000000000000000000000000000
[13430.981270] usblp 3-1:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x0A5F pid 0x0000
CUPS его не определяет, что делать?)

Ответ на: комментарий от Evil_And

и ещё попробуйте запустить из под root:

/usr/lib/cups/backend/usb

в выводе должна быть строчка вида «direct usb://Производитель/Модель?serial=серийный_номер .... »

Evil_And ★★ ()
Ответ на: комментарий от Evil_And
Bus 003 Device 002: ID 0a5f:0000 Zebra 
Couldn't open device, some information will be missing
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0         8
  idVendor           0x0a5f Zebra
  idProduct          0x0000 
  bcdDevice           17.17
  iManufacturer           1 
  iProduct                2 
  iSerial                 3 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xc0
      Self Powered
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         7 Printer
      bInterfaceSubClass      1 Printer
      bInterfaceProtocol      2 Bidirectional
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0

nicksavinoff ()
Ответ на: комментарий от nicksavinoff

Бывает. У меня так с кэноновским МФ3010 на Сусе было.

hts-al ()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.