Короче, дело было так. На проце стоит вентилятор, которому скоро исполнится 6 лет. Я его переодически смазываю и он работает как новый. Комп неделями не перегружаю. Сегодня в шест утра я проснулся из-за того, что он ушёл в перезагрузку и пикнул писи-спикер. Вста и вырубил машину. Утром включил, услышал, как "работает кулер на проце. Разобрал, смазал. Всё. Работает. Загружаю Линь и вижу след. --
ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:DMA hda: ST340014A, ATA DISK drive hdb: ST340014A, ATA DISK drive blk: queue c03cdc00, I/O limit 4095Mb (mask 0xffffffff) blk: queue c03cdd3c, I/O limit 4095Mb (mask 0xffffffff) hdc: ST340014A, ATA DISK drive hdd: _NEC DVD_RW ND-2500A, ATAPI CD/DVD-ROM drive blk: queue c03ce054, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100) hdb: attached ide-disk driver. hdb: host protected area => 1 hdb: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100) hdc: attached ide-disk driver. hdc: host protected area => 1 hdc: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100) hdd: attached ide-cdrom driver. hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Partition check: hda:<4>hda: dma_timer_expiry: dma status == 0x60 hda: timeout waiting for DMA hda: timeout waiting for DMA hda: (__ide_dma_test_irq) called while not waiting hda: status error: status=0x00 { }
hda: drive not ready for command hda: status error: status=0x00 { }
hda: drive not ready for command hda: status error: status=0x00 { }
hda: drive not ready for command hda: status error: status=0x00 { }
hdb: DMA disabled hda: drive not ready for command ide0: reset: success blk: queue c03cdc00, I/O limit 4095Mb (mask 0xffffffff) hda2 <<4>hda: dma_timer_expiry: dma status == 0x20 hda: timeout waiting for DMA hda: timeout waiting for DMA hda: (__ide_dma_test_irq) called while not waiting hda: status error: status=0x00 { }
hda: drive not ready for command hda: status error: status=0x00 { }
hda: drive not ready for command hda: status error: status=0x00 { }
hda: drive not ready for command hda: status error: status=0x00 { }
hda: drive not ready for command ide0: reset: success hda5<4>hda: dma_timer_expiry: dma status == 0x20 hda: timeout waiting for DMA hda: timeout waiting for DMA hda: (__ide_dma_test_irq) called while not waiting hda: status error: status=0x00 { }
hda: drive not ready for command hda: status error: status=0x00 { }
hda: drive not ready for command hda: status error: status=0x00 { }
hda: drive not ready for command hda: status error: status=0x00 { }
hda: drive not ready for command ide0: reset: success hda6<4>hda: dma_timer_expiry: dma status == 0x20 hda: timeout waiting for DMA hda: timeout waiting for DMA hda: (__ide_dma_test_irq) called while not waiting hda: status error: status=0x00 { }
hda: drive not ready for command hda: status error: status=0x00 { }
hda: drive not ready for command hda: status error: status=0x00 { }
hda: drive not ready for command hda: status error: status=0x00 { }
hda: drive not ready for command ide0: reset: success hda7 > hdb: hdb1 hdb2 hdb3 < hdb5 hdb6 > hdc: hdc1 < hdc5 >
===================
Что произошло с винтом? Или это систему глючит?