LINUX.ORG.RU

Re: Настроить VPN

> Как в пингвине настроить vpn (локальная сеть, логин, пароль)?

Мы не телепаты. Что именно настроить - клиент или сервер ?

fuzk ★
()

Re: Настроить VPN

смотри в сторону pptp-linux (pptpclient.sourceforge.net)

jackill ★★★★★
()

Re: Настроить VPN

Ставишь pptpclient,проверяешь pppd на наличие mppe если надо;

root@ttyp1[ppp]# cat /etc/ppp/peers/tunnel pty "pptp 192.168.100.1 --nolaunchpppd" name _логин_ remotename PPTP file /etc/ppp/options.pptp ipparam tunnel root@ttyp1[ppp]#

root@ttyp1[ppp]# cat /etc/ppp/options.pptp lock noauth nobsdcomp nodeflate debug nodetach noipdefault ipcp-accept-local ipcp-accept-remote defaultroute root@ttyp1[ppp]#

root@ttyp1[ppp]# cat chap-secrets # client server secret IP addresses PPTP _логин_ пароль * "_логин_" * "пароль"

В консоли под рутом: pppd call tunnel Будет видно что-то вроде:

root@ttyp0[knoppix]# pppd call tunnel using channel 1 Using interface ppp0 Connect: ppp0 <--> /dev/pts/0 sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x70ffa006> <pcomp> <accomp>] rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap 81> <magic 0x342728d9> <pcomp> <accomp>] sent [LCP ConfNak id=0x1 <auth chap MD5>] rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x70ffa006> <pcomp> <accomp>] rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <auth chap MD5> <magic 0x342728d9> <pcomp> <accomp>] sent [LCP ConfAck id=0x2 <asyncmap 0x0> <auth chap MD5> <magic 0x342728d9> <pcomp> <accomp>] sent [LCP EchoReq id=0x0 magic=0x70ffa006] rcvd [CHAP Challenge id=0x1 <e4dac33e004ea557bb1a8f55bd8369a4>, name = "*"] sent [CHAP Response id=0x1 <f01a8ab2a004da02520556463d6c0ca5>, name = "vlrob"] rcvd [LCP EchoRep id=0x0 magic=0x342728d9] rcvd [CHAP Success id=0x1 "Welcome to xxx."] Remote message: Welcome to xxx. sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01>] rcvd [IPCP ConfReq id=0x1 <addr 192.168.100.1> <compress VJ 0f 01>] sent [IPCP ConfAck id=0x1 <addr 192.168.100.1> <compress VJ 0f 01>] rcvd [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>] sent [CCP ConfReq id=0x1] sent [CCP ConfRej id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>] rcvd [IPCP ConfNak id=0x1 <addr 192.168.xxx.yyy>] sent [IPCP ConfReq id=0x2 <addr 192.168.xxx.yyy> <compress VJ 0f 01>] rcvd [CCP ConfAck id=0x1] rcvd [CCP ConfReq id=0x2] sent [CCP ConfAck id=0x2] rcvd [IPCP ConfAck id=0x2 <addr 192.168.xxx.yyy> <compress VJ 0f 01>] Cannot determine ethernet address for proxy ARP local IP address 192.168.xxx.xxx remote IP address 192.168.100.1 Script /etc/ppp/ip-up started (pid 937) Script /etc/ppp/ip-up finished (pid 937), status = 0x0 rcvd [CCP ConfReq id=0x2] sent [CCP ConfReq id=0x2]

Перед запуском укажи путь к хосту pptp-сервера,дефолтовый убери.

anonymous
()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.
General