LINUX.ORG.RU

ProFTPd ... Настройка пользователей.


0

0

Доброго времени суток. Данный вопрос наверное неоднократно обсуждался, но у меня почему то не особо получается решить его... Настройка пользователей.

Установлена ОС Ubuntu Server 9.10 ... ProFTPd 1.3.2

Вот его конфиг:

#
# /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.
# To really apply changes reload proftpd after modifications.
#

# Includes DSO modules
Include /etc/proftpd/modules.conf

# Set off to disable IPv6 support which is annoying on IPv4 only boxes.
UseIPv6                         off
# If set on you can experience a longer connection delay in many cases.
IdentLookups                    off

ServerName                      "IHS FTP SERVER"
ServerType                      standalone
DeferWelcome                    off

MultilineRFC2228                on
DefaultServer                   on
ShowSymlinks                    on

TimeoutNoTransfer               600
TimeoutStalled                  600
TimeoutIdle                     1200

DisplayLogin                    welcome.msg
DisplayChdir                    .message true
ListOptions                     "-la"

DenyFilter                      \*.*/

# Use this to jail all users in their homes
# DefaultRoot                   ~

# Users require a valid shell listed in /etc/shells to login.
# Use this directive to release that constrain.
RequireValidShell               off

# Port 21 is the standard FTP port.
Port                            21

# In some cases you have to specify passive ports range to by-pass
# firewall limitations. Ephemeral ports can be used for that, but
# feel free to use a more narrow range.
# PassivePorts                  49152 65534

# If your host was NATted, this option is useful in order to
# allow passive tranfers to work. You have to use your public
# address and opening the passive ports used on your firewall as well.
# MasqueradeAddress             1.2.3.4

# This is useful for masquerading address with dynamic IPs:
# refresh any configured MasqueradeAddress directives every 8 hours
<IfModule mod_dynmasq.c>
# DynMasqRefresh 28800
</IfModule>

# To prevent DoS attacks, set the maximum number of child processes
# to 30.  If you need to allow more than 30 concurrent connections
# at once, simply increase this value.  Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances                    30

# Set the user and group that the server normally runs at.
User                            proftpd
Group                           userftp



# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask                           022  022
# Normally, we want files to be overwriteable.
AllowOverwrite                  on

# Uncomment this if you are using NIS or LDAP via NSS to retrieve passwords:
# PersistentPasswd              off

# This is required to use both PAM-based authentication and local passwords
# AuthOrder                     mod_auth_pam.c* mod_auth_unix.c


# Be warned: use of this directive impacts CPU average load!
# Uncomment this if you like to see progress and transfer rate with ftpwho
# in downloads. That is not needed for uploads rates.
#
# UseSendFile                   off

TransferLog /var/log/proftpd/xferlog
SystemLog   /var/log/proftpd/proftpd.log

<IfModule mod_quotatab.c>
QuotaEngine on
</IfModule>

<IfModule mod_ratio.c>
Ratios off
</IfModule>


# Delay engine reduces impact of the so-called Timing Attack described in
# http://security.lss.hr/index.php?page=details&ID=LSS-2004-10-02
# It is on by default.
<IfModule mod_delay.c>
DelayEngine on
</IfModule>

<IfModule mod_ctrls.c>
ControlsEngine        off
ControlsMaxClients    2
ControlsLog           /var/log/proftpd/controls.log
ControlsInterval      5
ControlsSocket        /var/run/proftpd/proftpd.sock
</IfModule>

<IfModule mod_ctrls_admin.c>
AdminControlsEngine off
</IfModule>

#
# Alternative authentication frameworks
#
#Include /etc/proftpd/ldap.conf
#Include /etc/proftpd/sql.conf
#Include /etc/proftpd/ldap.conf
#Include /etc/proftpd/sql.conf

#
# This is used for FTPS connections
#
#Include /etc/proftpd/tls.conf

# A basic anonymous configuration, no upload directories.

# <Anonymous ~ftp>
#   User                                ftp
#   Group                               nogroup
#   # We want clients to be able to login with "anonymous" as well as "ftp"
#   UserAlias                   anonymous ftp
#   # Cosmetic changes, all files belongs to ftp user
#   DirFakeUser on ftp
#   DirFakeGroup on ftp
#
#   RequireValidShell           off
#
#   # Limit the maximum number of anonymous logins
#   MaxClients                  10
#
#   # We want 'welcome.msg' displayed at login, and '.message' displayed
#   # in each newly chdired directory.
#   DisplayLogin                        welcome.msg
#   DisplayChdir                .message
#
#   # Limit WRITE everywhere in the anonymous chroot
#   <Directory *>
#     <Limit WRITE>
#       DenyAll
#     </Limit>
#   </Directory>
#
#   # Uncomment this if you're brave.
#   # <Directory incoming>
#   #   # Umask 022 is a good standard umask to prevent new files and dirs
#   #   # (second parm) from being group and world writable.
#   #   Umask                           022  022
#   #            <Limit READ WRITE>
#   #            DenyAll
#   #            <Limit READ WRITE>
#   #            DenyAll
#   #            </Limit>
#   #            <Limit STOR>
#   #            AllowAll
#   #            </Limit>
#   # </Directory>
#
# </Anonymous>

Далее делаю директорию:

sudo mkdir /var/www/vhosts/site1

Создаю пользователя :

sudo useradd user1 -p password -d /var/www/vhosts/site1  -s /bin/false

для верности:

sudo /etc/init.d/proftpd restart

... Далее пытаюсь зайти туда, но получаю в ответ 530 ...

Help!!!

ProFTPd ... Настройка пользователей.

И вообще, начиная с # <Anonymous ~ftp> идет готовый конфиг для анонимного входа.

abraziv_whiskey ★★★★★ ()
Ответ на: Re: ProFTPd ... Настройка пользователей. от abraziv_whiskey

ProFTPd ... Настройка пользователей.

/etc/proftpd/modules.conf ... [code]# # This file is used to manage DSO modules and features. #

# This is the directory where DSO modules reside

ModulePath /usr/lib/proftpd

# Allow only user root to load and unload modules, but allow everyone # to see which modules have been loaded

ModuleControlsACLs insmod,rmmod allow user root ModuleControlsACLs lsmod allow user *

LoadModule mod_ctrls_admin.c LoadModule mod_tls.c

# Install one of proftpd-mod-mysql, proftpd-mod-pgsql or any other # SQL backend engine to use this module and the required backend. # This module must be mandatory loaded before anyone of # the existent SQL backeds. #LoadModule mod_sql.c

# Install proftpd-mod-ldap to use this #LoadModule mod_ldap.c

# # 'SQLBackend mysql' or 'SQLBackend postgres' directives are required # to have SQL authorization working. You can also comment out the # unused module here, in alternative. #

# Install proftpd-mod-mysql and decomment the previous # mod_sql.c module to use this. #LoadModule mod_sql_mysql.c

# Install proftpd-mod-pgsql and decommen the previous # mod_sql.c module to use this. #LoadModule mod_sql_postgres.c

# Install proftpd-mod-sqlite and decomment the previous # mod_sql.c module to use this #LoadModule mod_sql_sqlite.c # mod_sql.c module to use this #LoadModule mod_sql_sqlite.c

# Install proftpd-mod-odbc and decomment the previous # mod_sql.c moduleto use this #LoadModule mod_sql_odbc.c

LoadModule mod_radius.c LoadModule mod_quotatab.c LoadModule mod_quotatab_file.c

# Install proftpd-mod-ldap to use this #LoadModule mod_quotatab_ldap.c

# Install proftpd-mod-pgsql or proftpd-mod-mysql to use this #LoadModule mod_quotatab_sql.c LoadModule mod_quotatab_radius.c LoadModule mod_wrap.c LoadModule mod_rewrite.c LoadModule mod_load.c LoadModule mod_ban.c LoadModule mod_wrap2.c LoadModule mod_wrap2_file.c # Install proftpd-mod-pgsql or proftpd-mod-mysql to use this #LoadModule mod_wrap2_sql.c LoadModule mod_dynmasq.c

# keep this module the last one LoadModule mod_ifsession.c

<VirtualHost osinform.org> Port 21 ServerName «osinform.org» User osinform DefaultRoot ~ </VirtualHost> [/code]

DefaultRoot /var/www/vhosts/site1 не пробовал? на сервере будет не одна учётка ... => несколько директорий ...

dnbattack ()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.