Так, пожалуй, будет удобнее читать:
[root@Hedin cdr]# cdrecord -v speed=4 dev=0,0,0 -audio Track01.cdr
Track03.cdr Track04.cdr Track05.cdr Track06.cdr Track07.cdr Track08.cdr Track10.cdr Track11.cdr Track12.cdr Track13.cdr
Cdrecord 2.01a04 (i686-pc-linux-gnu) Copyright (C) 1995-2002 JЖrg Schilling
TOC Type: 0 = CD-DA
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : '_NEC '
Identifikation : 'NR-7800B '
Revision : '1.01'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 1234944 = 1206 KB
FIFO size : 4194304 = 4096 KB
Track 01: audio 37 MB (03:40.18) no preemp swab
Track 02: audio 37 MB (03:43.16) no preemp swab
Track 03: audio 46 MB (04:36.78) no preemp swab
Track 04: audio 96 MB (09:35.49) no preemp swab
Track 05: audio 44 MB (04:25.92) no preemp swab
Track 06: audio 46 MB (04:39.32) no preemp swab
Track 07: audio 55 MB (05:29.40) no preemp swab
Track 08: audio 51 MB (05:08.50) no preemp swab
Track 09: audio 67 MB (06:44.08) no preemp swab
Track 10: audio 59 MB (05:53.50) no preemp swab
Track 11: audio 93 MB (09:16.49) no preemp swab
Total size: 641 MB (63:32.85) = 285964 sectors
Lout start: 641 MB (63:34/64) = 285964 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -11619 (97:27/06)
ATIP start of lead out: 359848 (79:59/73)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 34
Manufacturer: DIGITAL STORAGE TECHNOLOGY CO.,LTD
Trying to clear drive status.
cdrecord: Drive needs to reload the media to return to proper status.
Starting to write CD/DVD at speed 4 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Turning BURN-Free off
Performing OPC...
cdrecord: Input/output error. read track info: scsi sendcmd: no error
CDB: 52 01 00 00 00 FF 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid) error refers to command part, bit ptr 0 (not valid) field ptr 0
cmd finished after 0.000s timeout 240s
Writing time: 4.704s
Average write speed 999.0x.
Fixating...
Fixating time: 0.001s
cdrecord: fifo had 64 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
[root@Hedin cdr]#
В чём может быть проблема?
