LINUX.ORG.RU

GnomeBaker


0

0

Что-то не могу ни очистить ни записать CD-RW

При попытке очистить выдает:

wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.6
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'LITE-ON '
Identification : 'COMBO LTC-48161H'
Revision : 'KQHC'
Device seems to be: Generic mmc2 DVD-ROM.


При записи:

wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.6
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 3 = CD-ROM XA mode 2
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'LITE-ON '
Identification : 'COMBO LTC-48161H'
Revision : 'KQHC'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x000A (CD-RW)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW) (current)
Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1895168 = 1850 KB
FIFO size : 4194304 = 4096 KB
Speed set to 1764 KB/s
wodim: Probably trying to use ultra high speed medium on improper writer.
wodim: fifo had 64 puts and 0 gets.
wodim: fifo was 0 times empty and 1 times full, min fill was 0%.

★★

Re: GnomeBaker

Проблемму решил

If you don't want to allow users to become root on your system, cdrecord may
safely be installed suid root. This allows all users or a group of users with
no root privileges to use cdrecord. Cdrecord in this case checks, if the real
user would have been able to read the specified files. To give all user access
to use cdrecord, enter:

chown root /usr/local/bin/cdrecord
chmod 4711 /usr/local/bin/cdrecord

Gooddy ★★ ()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.