LINUX.ORG.RU

WireGuard VPN Нет интернета у 2-3-4-5...-го клиента

 , ,


0

1

Добрый день уважаемые разработчики.

У меня возникла такая проблема,настроил в пару кликов тунель WireGuard. Делал по гайду https://unixhost.pro/clientarea/knowledgebase/63/ustanovka-wireguard.html

Добавляю в клиент на Windows свой wgclient_10.conf у меня интернет есть.Добавляю новый профиль, wgclient_11.conf.Клиент добавляет этот файл и у него нет интернета. Помогите пожалуйста ,мучаюсь уже 3 сутки.

################################ Sysctl.conf ################################

/etc/sysctl.conf - Configuration file for setting system variables

See /etc/sysctl.d/ for additional system variables.

See sysctl.conf (5) for information.

#kernel.domainname = example.com

Uncomment the following to stop low-level messages on console

#kernel.printk = 3 4 1 3

##############################################################3

Functions previously found in netbase

Uncomment the next two lines to enable Spoof protection (reverse-path filter)

Turn on Source Address Verification in all interfaces to

prevent some spoofing attacks

#net.ipv4.conf.default.rp_filter=1 #net.ipv4.conf.all.rp_filter=1

Uncomment the next line to enable TCP/IP SYN cookies

See http://lwn.net/Articles/277146/

Note: This may impact IPv6 TCP sessions too

#net.ipv4.tcp_syncookies=1

Uncomment the next line to enable packet forwarding for IPv4

net.ipv4.ip_forward=1

Uncomment the next line to enable packet forwarding for IPv6

Enabling this option disables Stateless Address Autoconfiguration

based on Router Advertisements for this host

#net.ipv6.conf.all.forwarding=1

###################################################################

Additional settings - these settings can improve the network

security of the host and prevent against some network attacks

including spoofing attacks and man in the middle attacks through

redirection. Some network environments, however, require that these

settings are disabled so review and enable them as needed.

Do not accept ICMP redirects (prevent MITM attacks)

#net.ipv4.conf.all.accept_redirects = 0 #net.ipv6.conf.all.accept_redirects = 0

or

Accept ICMP redirects only for gateways listed in our default

gateway list (enabled by default)

net.ipv4.conf.all.secure_redirects = 1

Do not send ICMP redirects (we are not a router)

#net.ipv4.conf.all.send_redirects = 0

Do not accept IP source route packets (we are not a router)

#net.ipv4.conf.all.accept_source_route = 0 #net.ipv6.conf.all.accept_source_route = 0

Log Martian Packets

#net.ipv4.conf.all.log_martians = 1

###################################################################

Magic system request Key

0=disable, 1=enable all, >1 bitmask of sysrq functions

See https://www.kernel.org/doc/html/latest/admin-guide/sysrq.html

for what other values do

#kernel.sysrq=438


@@@@@@@@@@@@@@@@@@@@@@@@@ Wgclient_10 @@@@@@@@@@@@@@@@@@@@@@@@@

10: 10 > wgclient_10.conf

[Interface] Address = 10.33.67.10/24 DNS = 80.80.80.80 PrivateKey = Key

[Peer] PublicKey = Key PresharedKey = Key AllowedIPs = 0.0.0.0/0, ::/0 Endpoint = ip:17387 PersistentKeepalive = 25


%%%%%%%%%%%%%%%%%%%%%%% Wgclient_11 %%%%%%%%%%%%%%%%%%%%%%%

11: 11 > wgclient_11.conf

[Interface] Address = 10.33.67.11/24 DNS = 80.80.80.80 PrivateKey = key

[Peer] PublicKey = Key PresharedKey = Key AllowedIPs = 0.0.0.0/0, ::/0 Endpoint = ip:17387 PersistentKeepalive = 25


Заранее спасибо ,те кто ответит.