LINUX.ORG.RU

Не печатает принтер через cups


0

0

При выводе на печать задание отправляется он рапортует сразуже что

оно выполнено но принтер ничего не печатает!

Keepmashin / # lsusb

Bus 004 Device 001: ID 0000:0000

Bus 003 Device 001: ID 0000:0000

Bus 002 Device 002: ID 03f0:1604 Hewlett-Packard DeskJet 940c

Bus 002 Device 001: ID 0000:0000

при Keepmashin / # echo "Hello World" > /dev/usb/lp0 печатает!

да и ещё не могу зайти в разделы меню http://127.0.0.1:631/

хотя он сам загружается без проблем.

★★★★

да вот лог 
d [18/Nov/2005:15:19:28 +0300] ReadClient: 7 writing 14521 bytes to 8
d [18/Nov/2005:15:19:28 +0300] ReadClient: 7 Closing data file 8, size = 14521.
d [18/Nov/2005:15:19:28 +0300] ProcessIPPRequest(0xb7a2cc3c[7]): operation_id = 0002
d [18/Nov/2005:15:19:28 +0300] ProcessIPPRequest: URI="ipp://localhost:631/printers/HP"
d [18/Nov/2005:15:19:28 +0300] print_job(0xb7a2cc3c[7], ipp://localhost:631/printers/HP)
D [18/Nov/2005:15:19:28 +0300] print_job: auto-typing file...
D [18/Nov/2005:15:19:28 +0300] print_job: request file type is application/postscript.
d [18/Nov/2005:15:19:28 +0300] check_quotas(0xb7a2cc3c[7], 0x8098720[HP])
D [18/Nov/2005:15:19:28 +0300] check_quotas: requesting-user-name = 'root'
D [18/Nov/2005:15:19:28 +0300] print_job: requesting-user-name = 'root'
D [18/Nov/2005:15:19:28 +0300] Adding default job-sheets values "none,none"...
I [18/Nov/2005:15:19:28 +0300] Adding start banner page "none" to job 16.
d [18/Nov/2005:15:19:28 +0300] copy_banner(0xb7a2cc3c[7], 0x80af088[16], none)
d [18/Nov/2005:15:19:28 +0300] add_file(con=0xb7a2cc3c[7], job=16, filetype=application/postscript, compression=0)
I [18/Nov/2005:15:19:28 +0300] Adding end banner page "none" to job 16.
d [18/Nov/2005:15:19:28 +0300] copy_banner(0xb7a2cc3c[7], 0x80af088[16], none)
I [18/Nov/2005:15:19:28 +0300] Job 16 queued on 'HP' by 'root'.
D [18/Nov/2005:15:19:28 +0300] Job 16 hold_until = 0
d [18/Nov/2005:15:19:28 +0300] SaveJob: Closing file 8...
D [18/Nov/2005:15:19:28 +0300] StartJob(16, 0x8098720)
D [18/Nov/2005:15:19:28 +0300] StartJob() id = 16, file = 0/1
D [18/Nov/2005:15:19:28 +0300] job-sheets=none,none
D [18/Nov/2005:15:19:28 +0300] banner_page = 0
D [18/Nov/2005:15:19:28 +0300] StartJob: argv = "HP","16","root","KDE Print Test","1","multiple-document-handling=separate-documents-unc
ollated-copies orientation-requested=3","/var/spool/cups/d00016-001"
D [18/Nov/2005:15:19:28 +0300] StartJob: envp[0]="PATH=/usr/lib/cups/filter:/bin:/usr/bin"
D [18/Nov/2005:15:19:28 +0300] StartJob: envp[1]="SOFTWARE=CUPS/1.1"
D [18/Nov/2005:15:19:28 +0300] StartJob: envp[2]="USER=root"
D [18/Nov/2005:15:19:28 +0300] StartJob: envp[3]="CHARSET=utf-8"
D [18/Nov/2005:15:19:28 +0300] StartJob: envp[4]="LANG=ru_RU"
D [18/Nov/2005:15:19:28 +0300] StartJob: envp[5]="PPD=/etc/cups/ppd/HP.ppd"
D [18/Nov/2005:15:19:28 +0300] StartJob: envp[6]="CUPS_SERVERROOT=/etc/cups"
D [18/Nov/2005:15:19:28 +0300] StartJob: envp[7]="RIP_MAX_CACHE=8m"
D [18/Nov/2005:15:19:28 +0300] StartJob: envp[8]="TMPDIR=/var/spool/cups/tmp"
D [18/Nov/2005:15:19:28 +0300] StartJob: envp[9]="CONTENT_TYPE=application/postscript"
D [18/Nov/2005:15:19:28 +0300] StartJob: envp[10]="DEVICE_URI=usb://HP/DeskJet%20940C?serial=HU24B2N2ZZCI"
D [18/Nov/2005:15:19:28 +0300] StartJob: envp[11]="PRINTER=HP"
D [18/Nov/2005:15:19:28 +0300] StartJob: envp[12]="CUPS_DATADIR=/usr/share/cups"
D [18/Nov/2005:15:19:28 +0300] StartJob: envp[13]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [18/Nov/2005:15:19:28 +0300] StartJob: envp[14]="CUPS_SERVER=localhost"
D [18/Nov/2005:15:19:28 +0300] StartJob: envp[15]="IPP_PORT=631"
d [18/Nov/2005:15:19:28 +0300] StartJob: Allocating status buffer...
D [18/Nov/2005:15:19:28 +0300] StartJob: statusfds = [ 8 9 ]
D [18/Nov/2005:15:19:28 +0300] StartJob: filterfds[1] = [ 10 -1 ]
D [18/Nov/2005:15:19:28 +0300] StartJob: filter = "/usr/lib/cups/filter/pstops"
D [18/Nov/2005:15:19:28 +0300] StartJob: filterfds[0] = [ 11 12 ]
D [18/Nov/2005:15:19:28 +0300] start_process("/usr/lib/cups/filter/pstops", 0xbf863e00, 0xbf863170, 10, 12, 9)
I [18/Nov/2005:15:19:28 +0300] Started filter /usr/lib/cups/filter/pstops (PID 7039) for job 16.
D [18/Nov/2005:15:19:28 +0300] StartJob: filter = "/usr/lib/cups/filter/pstoraster"
D [18/Nov/2005:15:19:28 +0300] StartJob: filterfds[1] = [ 10 13 ]
D [18/Nov/2005:15:19:28 +0300] start_process("/usr/lib/cups/filter/pstoraster", 0xbf863e00, 0xbf863170, 11, 13, 9)
I [18/Nov/2005:15:19:28 +0300] Started filter /usr/lib/cups/filter/pstoraster (PID 7040) for job 16.
D [18/Nov/2005:15:19:28 +0300] StartJob: filter = "/usr/lib/cups/filter/rastertohp"
D [18/Nov/2005:15:19:28 +0300] StartJob: filterfds[0] = [ 11 12 ]
D [18/Nov/2005:15:19:28 +0300] start_process("/usr/lib/cups/filter/rastertohp", 0xbf863e00, 0xbf863170, 10, 12, 9)
I [18/Nov/2005:15:19:28 +0300] Started filter /usr/lib/cups/filter/rastertohp (PID 7041) for job 16.
D [18/Nov/2005:15:19:28 +0300] StartJob: backend = "/usr/lib/cups/backend/usb"
D [18/Nov/2005:15:19:28 +0300] StartJob: filterfds[1] = [ -1 10 ]
D [18/Nov/2005:15:19:28 +0300] start_process("/usr/lib/cups/backend/usb", 0xbf863e00, 0xbf863170, 11, 10, 9)
I [18/Nov/2005:15:19:28 +0300] Started backend /usr/lib/cups/backend/usb (PID 7042) for job 16.
d [18/Nov/2005:15:19:28 +0300] StartJob: Adding fd 8 to InputSet...
d [18/Nov/2005:15:19:28 +0300] add_job_state_reasons(0xb7a2cc3c[7], 16)
D [18/Nov/2005:15:19:28 +0300] ProcessIPPRequest: 7 status_code=0
d [18/Nov/2005:15:19:28 +0300] ProcessIPPRequest: Adding fd 7 to OutputSet...
E [18/Nov/2005:15:19:28 +0300] PID 7039 stopped with status 22!
E [18/Nov/2005:15:19:28 +0300] PID 7040 stopped with status 22!
E [18/Nov/2005:15:19:28 +0300] PID 7041 stopped with status 22!
D [18/Nov/2005:15:19:28 +0300] [Job 16] /usr/lib/cups/filter/pstops: Permission denied
D [18/Nov/2005:15:19:28 +0300] [Job 16] /usr/lib/cups/filter/pstoraster: Permission denied
D [18/Nov/2005:15:19:28 +0300] [Job 16] /usr/lib/cups/filter/rastertohp: Permission denied
d [18/Nov/2005:15:19:28 +0300] WriteClient: Removing fd 7 from OutputSet...
d [18/Nov/2005:15:19:28 +0300] ReadClient: 7, used=0, file=-1
d [18/Nov/2005:15:19:28 +0300] ReadClient: httpGets returned EOF...
D [18/Nov/2005:15:19:28 +0300] CloseClient: 7
d [18/Nov/2005:15:19:28 +0300] CloseClient: Removing fd 7 from InputSet and OutputSet...
D [18/Nov/2005:15:19:28 +0300] [Job 16] Printer using device file "/dev/usb/lp0"...

keeper_b ★★★★
() автор топика
Ответ на: комментарий от keeper_b

-rwxr-xr-x  1 root root   36568  1. Jul 02:20 pstops
-rwxr-xr-x  1 root root    1856  2. Sep 16:53 pstoraster
-rwxr-xr-x  1 root root   15412  1. Jul 02:20 rastertohp


Эти файлы в /usr/lib/cups/filter похоже не запускаются по причине отсутствия прав на запуск.

SatanClaus ★★★
()

Ну поставил я всем этим файлам права 777 серавно не печатает!

мне ваше кажется что копать надо в сторону почему я не могу зайти в

раздел http://127.0.0.1:631/printers и так далие!!!

keeper_b ★★★★
() автор топика
Ответ на: комментарий от SatanClaus

########
######## Server Identity
########

#
# ServerName: the hostname of your server, as advertised to the world.
# By default CUPS will use the hostname of the system.
#
# To set the default server used by clients, see the client.conf file.
#

ServerName keepmashin

#
# ServerAdmin: the email address to send all complaints/problems to.
# By default CUPS will use "root@hostname".
#

#ServerAdmin root@your.domain.com


########
######## Server Options
########

#
# AccessLog: the access log file; if this does not start with a leading /
# then it is assumed to be relative to ServerRoot.  By default set to
# "/var/log/cups/access_log"
#
# You can also use the special name "syslog" to send the output to the
# syslog file or daemon.
#

AccessLog /var/log/cups/access_log

#
# Classification: the classification level of the server.  If set, this
# classification is displayed on all pages, and raw printing is disabled.
# The default is the empty string.
#

#Classification classified
#Classification confidential
#Classification secret
#Classification topsecret
#Classification unclassified

#
# ClassifyOverride: whether to allow users to override the classification
# on printouts. If enabled, users can limit banner pages to before or
# after the job, and can change the classification of a job, but cannot
# completely eliminate the classification or banners.
#
# The default is off.
#

#ClassifyOverride off

#
# DataDir: the root directory for the CUPS data files.
# By default "/usr/share/cups".
#

#DataDir /usr/share/cups

#
# DefaultCharset: the default character set to use. If not specified,
# defaults to "utf-8".  Note that this can also be overridden in
# HTML documents...
#

DefaultCharset utf-8

#
# DefaultLanguage: the default language if not specified by the browser.
# If not specified, the current locale is used.
#

DefaultLanguage en

#
# DocumentRoot: the root directory for HTTP documents that are served.
# By default "/usr/share/doc/cups".
#

DocumentRoot /usr/share/cups/docs

#
# ErrorLog: the error log file; if this does not start with a leading /
# then it is assumed to be relative to ServerRoot.  By default set to
# "/var/log/cups/error_log"
#
# You can also use the special name "syslog" to send the output to the
# syslog file or daemon.
#

ErrorLog /var/log/cups/error_log

#
# FileDevice: determines whether the scheduler will allow new printers
# to be added using device URIs of the form "file:/foo/bar". The default
# is not to allow file devices due to the potential security vulnerability
# and due to the fact that file devices do not support raw printing.
#

#FileDevice No


#
# FontPath: the path to locate all font files (currently only for pstoraster)
# By default "/usr/share/cups/fonts".
#

#FontPath /usr/share/cups/fonts

#
# LogLevel: controls the number of messages logged to the ErrorLog
# file and can be one of the following:
#
#     debug2	Log everything.
#     debug	Log almost everything.
#     info      Log all requests and state changes.
#     warn      Log errors and warnings.
#     error     Log only errors.
#     none      Log nothing.
#

LogLevel debug2

#
# MaxLogSize: controls the maximum size of each log file before they are
# rotated.  Defaults to 1048576 (1MB).  Set to 0 to disable log rotating.
#

#MaxLogSize 0

#
# PageLog: the page log file; if this does not start with a leading /
# then it is assumed to be relative to ServerRoot.  By default set to
# "/var/log/cups/page_log"
#
# You can also use the special name "syslog" to send the output to the
# syslog file or daemon.
#

PageLog /var/log/cups/page_log

#
# PreserveJobHistory: whether or not to preserve the job history after a
# job is completed, cancelled, or stopped.  Default is Yes.
#

#PreserveJobHistory Yes

#
# PreserveJobFiles: whether or not to preserve the job files after a
# job is completed, cancelled, or stopped.  Default is No.
#

#PreserveJobFiles No

#
# AutoPurgeJobs: automatically purge jobs when not needed for quotas.
# Default is No.
#

#AutoPurgeJobs No

#
# MaxCopies: maximum number of copies that a user can request. Default is
# 100.
#

#MaxCopies 100

#
# MaxJobs: maximum number of jobs to keep in memory (active and completed.)
# Default is 500; the value 0 is used for no limit.
#

#MaxJobs 500

#
# MaxJobsPerPrinter: maximum number of active jobs per printer. The default
# is 0 for no limit.
#

#MaxJobsPerPrinter 0

#
# MaxJobsPerUser: maximum number of active jobs per user. The default
# is 0 for no limit.
#

#MaxJobsPerUser 0

#
# MaxPrinterHistory: controls the maximum number of history collections
# in the printer-state-history attribute.  Set to 0 to disable history
# data.
#

#MaxPrinterHistory 10

#
# Printcap: the name of the printcap file.  Default is /etc/printcap.
# Leave blank to disable printcap file generation.
#

#Printcap /etc/printcap

#
# PrintcapFormat: the format of the printcap file, currently either
# BSD or Solaris.  The default is "BSD".
#

#PrintcapFormat BSD
#PrintcapFormat Solaris

#
# PrintcapGUI: the name of the GUI options panel program to associate
# with print queues under IRIX.  The default is "/usr/bin/glpoptions"
# from ESP Print Pro.
#
# This option is only used under IRIX; the options panel program
# must accept the "-d printer" and "-o options" options and write
# the selected printer options back to stdout on completion.
#

#PrintcapGUI /usr/bin/glpoptions

#
# RequestRoot: the directory where request files are stored.
# By default "/var/spool/cups".
#

#RequestRoot /var/spool/cups

#
# RemoteRoot: the name of the user assigned to unauthenticated accesses
# from remote systems.  By default "remroot".
#

#RemoteRoot remroot

#
# ServerBin: the root directory for the scheduler executables.
# By default "/usr/lib/cups".
#

#ServerBin /usr/lib/cups

#
# ServerRoot: the root directory for the scheduler.
# By default "/etc/cups".
#

#ServerRoot /etc/cups


#
# ServerTokens: specifies what information in provided in the Server
# header of HTTP responses. The default is Minor.
#
# ServerTokens None
# ServerTokens ProductOnly       CUPS
# ServerTokens Major             CUPS/1
# ServerTokens Minor             CUPS/1.1
# ServerTokens Minimal           CUPS/1.1.23
# ServerTokens OS                CUPS/1.1.23 (uname)
# ServerTokens Full              CUPS/1.1.23 (uname) IPP/1.1
#

#ServerTokens Minor

keeper_b ★★★★
() автор топика
Ответ на: комментарий от keeper_b

########
######## Fax Support
########

#
# FaxRetryLimit: the number of times a fax job is retried.
# The default is 5 times.
#

#FaxRetryLimit 5

#
# FaxRetryInterval: the number of seconds between fax job retries.
# The default is 300 seconds/5 minutes.
#

#FaxRetryInterval 300


########
######## Encryption Support
########

#
# ServerCertificate: the file to read containing the server's certificate.
# Defaults to "/etc/cups/ssl/server.crt".
#

#ServerCertificate /etc/cups/ssl/server.crt

#
# ServerKey: the file to read containing the server's key.
# Defaults to "/etc/cups/ssl/server.key".
#

#ServerKey /etc/cups/ssl/server.key


########
######## Filter Options
########

#
# User/Group: the user and group the server runs under.  Normally this
# must be lp and lp, however you can configure things for another
# user or group as needed.
#
# Note: the server must be run initially as root to support the
# default IPP port of 631.  It changes users whenever an external
# program is run, or if the RunAsUser directive is specified...
#

User lp
Group lp

#
# RIPCache: the amount of memory that each RIP should use to cache
# bitmaps.  The value can be any real number followed by "k" for
# kilobytes, "m" for megabytes, "g" for gigabytes, or "t" for tiles
# (1 tile = 256x256 pixels.)  Defaults to "8m" (8 megabytes).
#

#RIPCache 8m

#
# TempDir: the directory to put temporary files in.  This directory must be
# writable by the user defined above!  Defaults to "/var/spool/cups/tmp" or
# the value of the TMPDIR environment variable.
#

TempDir /var/spool/cups/tmp

#
# FilterLimit: sets the maximum cost of all job filters that can be run
# at the same time.  A limit of 0 means no limit.  A typical job may need
# a filter limit of at least 200; limits less than the minimum required
# by a job force a single job to be printed at any time.
#
# The default limit is 0 (unlimited).
#

#FilterLimit 0

########
######## Network Options
########

#
# Ports/addresses that we listen to.  The default port 631 is reserved
# for the Internet Printing Protocol (IPP) and is what we use here.
#
# You can have multiple Port/Listen lines to listen to more than one
# port or address, or to restrict access:
#
#    Port 80
#    Port 631
#    Listen hostname
#    Listen hostname:80
#    Listen 127.0.0.1:631
#    Listen keepmashin:631
#    Listen 1.2.3.4
#    Listen 1.2.3.4:631
# 
# NOTE: Unfortunately, most web browsers don't support TLS or HTTP Upgrades
# for encryption.  If you want to support web-based encryption you'll
# probably need to listen on port 443 (the "https" port...)
#
# NOTE 2: In order for the command-line and web interfaces to work, you
# must have at least one Port or Listen line that allows access from the
# local loopback address (localhost).
#

#Port 80
#Port 443
Port 631

#
# HostNameLookups: whether or not to do lookups on IP addresses to get a
# fully-qualified hostname.  This defaults to Off for performance reasons...
#

HostNameLookups On

#
# KeepAlive: whether or not to support the Keep-Alive connection
# option.  Default is on.
#

#KeepAlive On

#
# KeepAliveTimeout: the timeout before Keep-Alive connections are
# automatically closed.  Default is 60 seconds.
#

#KeepAliveTimeout 60

#
# MaxClients: controls the maximum number of simultaneous clients that
# will be handled.  Defaults to 100.
#

#MaxClients 100

#
# MaxClientsPerHost: controls the maximum number of simultaneous clients that
# will be handled from a specific host.  Defaults to 10 or 1/10th of the
# MaxClients setting, whichever is larger.  A value of 0 specifies the
# automatic (10 or 1/10th) setting.
#

#MaxClientsPerHost 0

#
# MaxRequestSize: controls the maximum size of HTTP requests and print files.
# Set to 0 to disable this feature (defaults to 0.)
#

#MaxRequestSize 0

#
# Timeout: the timeout before requests time out.  Default is 300 seconds.
#

#Timeout 300

keeper_b ★★★★
() автор топика
Ответ на: комментарий от keeper_b

########
######## Browsing Options
########

#
# Browsing: whether or not to broadcast and/or listen for CUPS printer
# information on the network.  Enabled by default.
#

Browsing On

#
# BrowseProtocols: which protocols to use for browsing.  Can be
# any of the following separated by whitespace and/or commas:
#
#     all  - Use all supported protocols.
#     cups - Use the CUPS browse protocol.
#     slp  - Use the SLPv2 protocol.
#
# The default is "cups".
#
# NOTE: If you choose to use SLPv2, it is *strongly* recommended that
#       you have at least one SLP Directory Agent (DA) on your
#       network.  Otherwise, browse updates can take several seconds,
#       during which the scheduler will not respond to client
#       requests.
#

BrowseProtocols all

#
# BrowseAddress: specifies a broadcast address to be used.  By
# default browsing information is not sent!
#
# Note: HP-UX does not properly handle broadcast unless you have a
# Class A, B, C, or D netmask (i.e. no CIDR support).
#
# Note: Using the "global" broadcast address (255.255.255.255) will
# activate a Linux demand-dial link with the default configuration.
# If you have a LAN as well as the dial-up link, use the LAN's
# broadcast address.
#
# The @LOCAL address broadcasts to all non point-to-point interfaces.
# For example, if you have a LAN and a dial-up link, @LOCAL would
# send printer updates to the LAN but not to the dial-up link.
# Similarly, the @IF(name) address sends to the named network
# interface, e.g. @IF(eth0) under Linux.  Interfaces are refreshed
# automatically (no more than once every 60 seconds), so they can
# be used on dynamically-configured interfaces, e.g. PPP, 802.11, etc.
#

#BrowseAddress x.y.z.255
#BrowseAddress x.y.255.255
#BrowseAddress x.255.255.255
#BrowseAddress 255.255.255.255
#BrowseAddress @LOCAL
#BrowseAddress @IF(name)

#
# BrowseShortNames: whether or not to use "short" names for remote printers
# when possible (e.g. "printer" instead of "printer@host".)  Enabled by
# default.
#

#BrowseShortNames Yes

#
# BrowseAllow: specifies an address mask to allow for incoming browser
# packets. The default is to allow packets from all addresses.
#
# BrowseDeny: specifies an address mask to deny for incoming browser
# packets. The default is to deny packets from no addresses.
#
# Both "BrowseAllow" and "BrowseDeny" accept the following notations for
# addresses:
#
#     All
#     None
#     *.domain.com
#     .domain.com
#     host.domain.com
#     nnn.*
#     nnn.nnn.*
#     nnn.nnn.nnn.*
#     nnn.nnn.nnn.nnn
#     nnn.nnn.nnn.nnn/mm
#     nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm
#     @LOCAL
#     @IF(name)
#
# The hostname/domainname restrictions only work if you have turned hostname
# lookups on!
#

#BrowseAllow address
#BrowseDeny address

#
# BrowseInterval: the time between browsing updates in seconds.  Default
# is 30 seconds.
#
# Note that browsing information is sent whenever a printer's state changes
# as well, so this represents the maximum time between updates.
#
# Set this to 0 to disable outgoing broadcasts so your local printers are
# not advertised but you can still see printers on other hosts.
#

#BrowseInterval 30

#
# BrowseOrder: specifies the order of BrowseAllow/BrowseDeny comparisons.
#

#BrowseOrder allow,deny
#BrowseOrder deny,allow

#
# BrowsePoll: poll the named server(s) for printers
#

#BrowsePoll address:port

#
# BrowsePort: the port used for UDP broadcasts.  By default this is
# the IPP port; if you change this you need to do it on all servers.
# Only one BrowsePort is recognized.
#

BrowsePort 631

#
# BrowseRelay: relay browser packets from one address/network to another.
#

#BrowseRelay source-address destination-address
#BrowseRelay @IF(src) @IF(dst)

#
# BrowseTimeout: the timeout for network printers - if we don't
# get an update within this time the printer will be removed
# from the printer list.  This number definitely should not be
# less the BrowseInterval value for obvious reasons.  Defaults
# to 300 seconds.
#

BrowseTimeout 300

#
# ImplicitClasses: whether or not to use implicit classes.
#
# Printer classes can be specified explicitly in the classes.conf
# file, implicitly based upon the printers available on the LAN, or
# both.
#
# When ImplicitClasses is On, printers on the LAN with the same name
# (e.g. Acme-LaserPrint-1000) will be put into a class with the same
# name. This allows you to setup multiple redundant queues on a LAN
# without a lot of administrative difficulties.  If a user sends a
# job to Acme-LaserPrint-1000, the job will go to the first available
# queue.
#
# Enabled by default.
#

#ImplicitClasses On

#
# ImplicitAnyClasses: whether or not to create "AnyPrinter" implicit
# classes.
#
# When ImplicitAnyClasses is On and a local queue of the same name
# exists, e.g. "printer", "printer@server1", "printer@server1", then
# an implicit class called "Anyprinter" is created instead.
#
# When ImplicitAnyClasses is Off, implicit classes are not created
# when there is a local queue of the same name.
#
# Disabled by default.
#

#ImplicitAnyCLasses Off

#
# HideImplicitMembers: whether or not to show the members of an
# implicit class.
#
# When HideImplicitMembers is On, any remote printers that are
# part of an implicit class are hidden from the user, who will
# then only see a single queue even though many queues will be
# supporting the implicit class.
#
# Enabled by default.
#

#HideImplicitMembers On

keeper_b ★★★★
() автор топика
Ответ на: комментарий от keeper_b

########
######## Security Options
########

#
# SystemGroup: the group name for "System" (printer administration)
# access.  The default varies depending on the operating system, but
# will be "sys", "system", or "root" (checked for in that order.)
#

SystemGroup lp

#
# RootCertDuration: How frequently the root certificate is regenerated.
# Defaults to 300 seconds.
#

#RootCertDuration 300

#
# Access permissions for each directory served by the scheduler.
# Locations are relative to DocumentRoot...
#
# AuthType: the authorization to use:
#
#    None   - Perform no authentication
#    Basic  - Perform authentication using the HTTP Basic method.
#    Digest - Perform authentication using the HTTP Digest method.
#
#    (Note: local certificate authentication can be substituted by
#           the client for Basic or Digest when connecting to the
#           localhost interface)
#
# AuthClass: the authorization class; currently only "Anonymous", "User",
# "System" (valid user belonging to group SystemGroup), and "Group"
# (valid user belonging to the specified group) are supported.
#
# AuthGroupName: the group name for "Group" authorization.
#
# Order: the order of Allow/Deny processing.
#
# Allow: allows access from the specified hostname, domain, IP address,
# network, or interface.
#
# Deny: denies access from the specified hostname, domain, IP address,
# network, or interface.
#
# Both "Allow" and "Deny" accept the following notations for addresses:
#
#     All
#     None
#     *.domain.com
#     .domain.com
#     host.domain.com
#     nnn.*
#     nnn.nnn.*
#     nnn.nnn.nnn.*
#     nnn.nnn.nnn.nnn
#     nnn.nnn.nnn.nnn/mm
#     nnn.nnn.nnn.nnn/mmm.mmm.mmm.mmm
#     @LOCAL
#     @IF(name)
#
# The host and domain address require that you enable hostname lookups
# with "HostNameLookups On" above.
#
# The @LOCAL address allows or denies from all non point-to-point
# interfaces.  For example, if you have a LAN and a dial-up link,
# @LOCAL could allow connections from the LAN but not from the dial-up
# link.  Similarly, the @IF(name) address allows or denies from the
# named network interface, e.g. @IF(eth0) under Linux.  Interfaces are
# refreshed automatically (no more than once every 60 seconds), so
# they can be used on dynamically-configured interfaces, e.g. PPP,
# 802.11, etc.
#
# Encryption: whether or not to use encryption; this depends on having
# the OpenSSL library linked into the CUPS library and scheduler.
#
# Possible values:
#
#     Always       - Always use encryption (SSL)
#     Never        - Never use encryption
#     Required     - Use TLS encryption upgrade
#     IfRequested  - Use encryption if the server requests it
#
# The default value is "IfRequested".
#

<Location />
Order Deny,Allow
Deny From All
Allow From 127.0.0.1
</Location>

#<Location /classes>
#
# You may wish to limit access to printers and classes, either with Allow
# and Deny lines, or by requiring a username and password.
#
#</Location>

#<Location /classes/name>
#
# You may wish to limit access to printers and classes, either with Allow
# and Deny lines, or by requiring a username and password.
#
#</Location>

#<Location /jobs>
#
# You may wish to limit access to job operations, either with Allow
# and Deny lines, or by requiring a username and password.
#
#</Location>

<Location /printers>
#
# You may wish to limit access to printers and classes, either with Allow
# and Deny lines, or by requiring a username and password.
#
Order Deny,Allow
Deny From All
Allow From 127.0.0.1 #test

</Location>

<Location /printers/name>
#
# You may wish to limit access to printers and classes, either with Allow
# and Deny lines, or by requiring a username and password.
#

## Anonymous access (default)
#AuthType None

## Require a username and password (Basic authentication)
#AuthType Basic
#AuthClass User

## Require a username and password (Digest/MD5 authentication)
#AuthType Digest
#AuthClass User

## Restrict access to local domain
Order Deny,Allow
Deny From All
Allow From 127.0.0.1    #test
</Location>

<Location /admin>
#
# You definitely will want to limit access to the administration functions.
# The default configuration requires a local connection from a user who
# is a member of the system group to do any admin tasks.  You can change
# the group name using the SystemGroup directive.
#

AuthType Basic
AuthClass System

## Restrict access to local domain
Order Deny,Allow
Deny From All
Allow From 127.0.0.1

#Encryption Required
</Location>

keeper_b ★★★★
() автор топика
Ответ на: комментарий от SatanClaus

Да он там всё время одно и тоже пишет.....
но это вроде не ругается...
localhost - - [18/Nov/2005:16:37:14 +0300] "POST /classes/ HTTP/1.1" 200 221
localhost - - [18/Nov/2005:16:37:14 +0300] "POST /printers/ HTTP/1.1" 200 109
localhost - - [18/Nov/2005:16:37:14 +0300] "POST /printers/ HTTP/1.1" 200 368
localhost - - [18/Nov/2005:16:37:14 +0300] "POST / HTTP/1.1" 200 197
localhost - - [18/Nov/2005:16:37:14 +0300] "GET /ppd/HP.ppd HTTP/1.1" 200 9473
localhost - - [18/Nov/2005:16:37:14 +0300] "POST / HTTP/1.1" 200 369
localhost - - [18/Nov/2005:16:37:19 +0300] "POST /printers/ HTTP/1.1" 200 221
localhost - - [18/Nov/2005:16:37:19 +0300] "POST /classes/ HTTP/1.1" 200 221
localhost - - [18/Nov/2005:16:37:19 +0300] "POST /printers/ HTTP/1.1" 200 109
localhost - - [18/Nov/2005:16:37:19 +0300] "POST /printers/ HTTP/1.1" 200 368
localhost - - [18/Nov/2005:16:37:19 +0300] "POST / HTTP/1.1" 200 197
localhost - - [18/Nov/2005:16:37:20 +0300] "GET /ppd/HP.ppd HTTP/1.1" 200 9473
localhost - - [18/Nov/2005:16:37:20 +0300] "POST / HTTP/1.1" 200 369
localhost - - [18/Nov/2005:16:39:16 +0300] "GET /favicon.ico HTTP/1.1" 404 0
localhost - - [18/Nov/2005:16:39:17 +0300] "GET /printers HTTP/1.1" 200 0
localhost - - [18/Nov/2005:16:39:17 +0300] "GET /printers HTTP/1.1" 200 0
localhost - - [18/Nov/2005:16:39:26 +0300] "GET /printers HTTP/1.1" 200 0
localhost - - [18/Nov/2005:16:39:26 +0300] "GET /printers HTTP/1.1" 200 0
localhost - - [18/Nov/2005:16:47:01 +0300] "POST / HTTP/1.1" 200 131
localhost - - [18/Nov/2005:16:47:01 +0300] "POST / HTTP/1.1" 200 131
localhost - - [18/Nov/2005:17:01:48 +0300] "POST / HTTP/1.1" 200 131
localhost - - [18/Nov/2005:17:01:48 +0300] "POST / HTTP/1.1" 200 131
localhost - - [18/Nov/2005:17:18:06 +0300] "POST / HTTP/1.1" 200 131
localhost - - [18/Nov/2005:17:18:06 +0300] "POST / HTTP/1.1" 200 131
localhost - - [18/Nov/2005:17:38:34 +0300] "POST / HTTP/1.1" 200 131
localhost - - [18/Nov/2005:17:38:34 +0300] "POST / HTTP/1.1" 200 131

keeper_b ★★★★
() автор топика
Ответ на: комментарий от keeper_b

Сорри!

<Location /printers>
#
# You may wish to limit access to printers and classes, either with Allow
# and Deny lines, or by requiring a username and password.
#
Order Deny,Allow
Deny From All
Allow From 127.0.0.1 #test

</Location>

<Location /printers/name>
#
# You may wish to limit access to printers and classes, either with Allow
# and Deny lines, or by requiring a username and password.
#

## Anonymous access (default)
#AuthType None

## Require a username and password (Basic authentication)
#AuthType Basic
#AuthClass User

## Require a username and password (Digest/MD5 authentication)
#AuthType Digest
#AuthClass User

## Restrict access to local domain
Order Deny,Allow
Deny From All
Allow From 127.0.0.1    #test
</Location>

Тут похоже AuthType и AuthClass отсутствуют

SatanClaus ★★★
()
Ответ на: комментарий от SatanClaus

теперя при входе в http://127.0.0.1:631/printers

пишет Forbidden =)

и распечатоть ваше ничего не получается

сразу вываливается ошибка что cups неправильно настроен!

keeper_b ★★★★
() автор топика
Ответ на: комментарий от keeper_b

Тогда дефолтный конфиг поставить или вообще переставить cups. Другого выхода не вижу. По дефаулту с локалхоста должно работать без лишних телодвижений.

SatanClaus ★★★
()
Ответ на: комментарий от keeper_b

У меня так:

LogLevel info

Printcap /etc/printcap

User lp
Group lp
RunAsUser Yes

Port 631

BrowseAllow @LOCAL
BrowseDeny All

<Location />
Order Deny,Allow
Deny From All
Allow From 127.0.0.1
Allow From 127.0.0.2
Allow From @LOCAL
</Location>

<Location /admin>

AuthType BasicDigest
AuthClass Group
AuthGroupName sys

Order Deny,Allow
Deny From All
Allow From 127.0.0.1

</Location>

suser
()
Ответ на: комментарий от keeper_b

Интересно :)

при logLevel debug2

в логах появляется такая ошибка

E [20/Nov/2005:00:40:18 +0300] PID 2354 stopped with status 13!

keeper_b ★★★★
() автор топика
Ответ на: комментарий от keeper_b

Там что то с провами доступа не так!

Но вот что? :(

keeper_b ★★★★
() автор топика
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.