LINUX.ORG.RU

VMware


0

0

Обновил ядро и после этого выполняю vmware-config.pl. Выдает ошибки

Do you want networking for your virtual machines? (yes/no/help) [yes]

Would you prefer to modify your existing networking configuration using the
wizard or the editor? (wizard/editor/help) [wizard]

The following bridged networks have been defined:

. vmnet0 is bridged to eth0

Do you wish to configure another bridged network? (yes/no) [no]

Do you want to be able to use NAT networking in your virtual machines? (yes/no)
[yes]

Configuring a NAT network for vmnet8.

Do you want this program to probe for an unused private subnet? (yes/no/help)
[yes]

Probing for an unused private subnet (this can take some time)...

The subnet 192.168.136.0/255.255.255.0 appears to be unused.

This system appears to have a DHCP server configured for normal use. Beware
that you should teach it how not to interfere with VMware Workstation's DHCP
server. There are two ways to do this:

1) Modify the file /etc/dhcpd.conf to add something like:

subnet 192.168.136.0 netmask 255.255.255.0 {
# Note: No range is given, vmnet-dhcpd will deal with this subnet.
}

2) Start your DHCP server with an explicit list of network interfaces to deal
with (leaving out vmnet8). e.g.:

dhcpd eth0

Consult the dhcpd(8) and dhcpd.conf(5) manual pages for details.

Hit enter to continue.

The following NAT networks have been defined:

. vmnet8 is a NAT network on private subnet 192.168.136.0.

Do you wish to configure another NAT network? (yes/no) [no]

Do you want to be able to use host-only networking in your virtual machines?
[yes] no

Extracting the sources of the vmnet module.

Building the vmnet module.

Building for VMware Workstation 5.0.0.
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config11/vmnet-only'
make -C /lib/modules/2.6.14-1.1637_FC4smp/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/kernels/2.6.14-1.1637_FC4-smp-i686'
CC [M] /tmp/vmware-config11/vmnet-only/driver.o
In file included from /tmp/vmware-config11/vmnet-only/vnet.h:14,
from /tmp/vmware-config11/vmnet-only/vnetInt.h:10,
from /tmp/vmware-config11/vmnet-only/driver.c:40:
/tmp/vmware-config11/vmnet-only/vm_atomic.h:56:5: warning: "_MSC_VER" is not defined
In file included from /tmp/vmware-config11/vmnet-only/vm_oui.h:14,
from /tmp/vmware-config11/vmnet-only/vnetInt.h:11,
from /tmp/vmware-config11/vmnet-only/driver.c:40:
/tmp/vmware-config11/vmnet-only/vm_basic_asm.h:50:5: warning: "_MSC_VER" is not defined
/tmp/vmware-config11/vmnet-only/driver.c: In function ‘VNetProcessOwnsPort’:
/tmp/vmware-config11/vmnet-only/driver.c:1816: error: ‘struct files_struct’ has no member named ‘max_fds’
make[2]: *** [/tmp/vmware-config11/vmnet-only/driver.o] Ошибка 1
make[1]: *** [_module_/tmp/vmware-config11/vmnet-only] Ошибка 2
make[1]: Leaving directory `/usr/src/kernels/2.6.14-1.1637_FC4-smp-i686'
make: *** [vmnet.ko] Ошибка 2
make: Leaving directory `/tmp/vmware-config11/vmnet-only'
Unable to build the vmnet module.

For more information on how to troubleshoot module-related problems, please
visit our Web site at "http://www.vmware.com/download/modules/modules.html"; and
"http://www.vmware.com/support/reference/linux/prebuilt_modules_linux.html";.

Execution aborted.

[root@soz ~]#


В чем дело???????

anonymous

Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.