LINUX.ORG.RU
ФорумAdmin

проблема с pptpclient в FC3


0

0

Пытаюсь установить VPN-соединение с MS-сервером (там включена mschap-v2 авторизация) у меня FC3 (ядро 2.6.9-1.667smp) и pptp-1.6.0-1 вроде как всё настроил, пароль в chap-sercrets прописал.

тут читал проблемы http://pptpclient.sourceforge.net/howto-diagnosis.phtml#log

вот лог соединениея, в котором не видно вообще какой-либо авторизации, в чем может быть проблема?

# pppd call mos logfd 2 nodetach debug dump pppd options in effect: debug debug # (from command line) nodetach # (from command line) logfd 2 # (from command line) linkname mos # (from /etc/ppp/peers/mos) dump # (from command line) noauth # (from /etc/ppp/options.pptp) name DOM\\user1 # (from /etc/ppp/peers/mos) remotename mos # (from /etc/ppp/peers/mos) # (from /etc/ppp/options.pptp) pty pptp 192.168.10.1 --nolaunchpppd # (from /etc/ppp/peers/mos) ipparam mos # (from /etc/ppp/peers/mos) nobsdcomp # (from /etc/ppp/options.pptp) nodeflate # (from /etc/ppp/options.pptp) require-mppe # (from /etc/ppp/peers/mos) require-mppe-128 # (from /etc/ppp/options.pptp) using channel 8 Using interface ppp0 Connect: ppp0 <--> /dev/pts/4 sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xfe75f4c4> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xfe75f4c4> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xfe75f4c4> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xfe75f4c4> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xfe75f4c4> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xfe75f4c4> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xfe75f4c4> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xfe75f4c4> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xfe75f4c4> <pcomp> <accomp>] sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xfe75f4c4> <pcomp> <accomp>]

anonymous

Re: проблема с pptpclient в FC3

У меня по fc3 всё прекрасно работает.

un 10 13:10:04 localhost crond(pam_unix)[31942]: session closed for user cacti Jun 10 13:14:24 localhost su(pam_unix)[31989]: session opened for user root by era(uid=0) Jun 10 13:14:29 localhost kernel: CSLIP: code copyright 1989 Regents of the University of California Jun 10 13:14:29 localhost kernel: PPP generic driver version 2.4.2 Jun 10 13:14:29 localhost pppd[32053]: pppd 2.4.2 started by root, uid 0 Jun 10 13:14:29 localhost pppd[32053]: Using interface ppp0 Jun 10 13:14:29 localhost pppd[32053]: Connect: ppp0 <--> /dev/pts/5 Jun 10 13:14:29 localhost pptp[32054]: anon log[main:pptp.c:267]: The synchronous pptp option is NOT activated Jun 10 13:14:29 localhost pptp[32077]: anon log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 1 'Start-Control-Connection-Request' Jun 10 13:14:30 localhost pptp[32077]: anon log[ctrlp_disp:pptp_ctrl.c:732]: Received Start Control Connection Reply Jun 10 13:14:30 localhost pptp[32077]: anon log[ctrlp_disp:pptp_ctrl.c:766]: Client connection established. Jun 10 13:14:30 localhost pptp[32077]: anon log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 7 'Outgoing-Call-Request' Jun 10 13:14:30 localhost pptp[32077]: anon log[ctrlp_disp:pptp_ctrl.c:851]: Received Outgoing Call Reply. Jun 10 13:14:30 localhost pptp[32077]: anon log[ctrlp_disp:pptp_ctrl.c:890]: Outgoing call established (call ID 0, peer's call ID 6272). Jun 10 13:14:33 localhost kernel: PPP MPPE Compression module registered Jun 10 13:14:33 localhost pppd[32053]: MPPE 128-bit stateless compression enabled Jun 10 13:14:34 localhost pppd[32053]: local IP address 192.168.1.70 Jun 10 13:14:34 localhost pppd[32053]: remote IP address 192.168.1.254 Jun 10 13:14:34 localhost pppd[32053]: primary DNS address xxxx Jun 10 13:14:34 localhost pppd[32053]: secondary DNS address xxxx (END)

anonymous ()
Ответ на: Re: проблема с pptpclient в FC3 от anonymous

Re: проблема с pptpclient в FC3

я как понял у меня нет вот этого

kernel: PPP MPPE Compression module registered

хотя такой пакет ставил kernel_ppp_mppe-0.0.5-2dkms

как долны быть настроена поодержка MPPE ?

anonymous ()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.