День добрый.
Возникла такая потребность ограничить доступ к определенным ресурсам в организации. Для этой цели выбрал сервер на centos7 и squid.
После длительного чтения гайдов и мануалов по настройке сквида так и не получилось его заставить работать.
В идеале мне хотелось бы настроить прозрачный прокси для всех клиентов и выдавать различные доступы по имени машины.
Имеется DHCP/DNS -серверы настроенные на centos7 c 1 сетевым интерфейсом (это виртуальная машина и есть возможность сделать второй интерфейс но в ту же сеть)
Собсно вопрос в том возможно ли это реализовать с помощью сквида? ну или с помощью чего это можно осуществить?
Зарание спасибо!
P.S. конфиг squid’а
#
# Recommended minimum configuration:
#
shutdown_lifetime 0 seconds
# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed
#acl localnet src 10.0.0.0/8 # RFC1918 possible internal network
#acl localnet src 172.16.0.0/12 # RFC1918 possible internal network
acl localnet src 192.168.0.0/24 # RFC1918 possible internal network
#acl localnet src fc00::/7 # RFC 4193 local private network range
#acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines
acl bl dstdom_regex -i /etc/squid/bl
acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT
#
# Recommended minimum Access Permission configuration:
#
# Deny requests to certain unsafe ports
http_access deny !Safe_ports
#
dns_nameservers 127.0.0.1 8.8.8.8
allow_underscore off
dns_retransmit_interval 1 seconds
dns_timeout 2 minutes
dns_defnames off
ignore_unknown_nameservers off
fqdncache_size 8192
#http_access deny bl all
# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports
# Only allow cachemgr access from localhost
http_access allow all
http_access allow localhost manager
http_access deny manager
# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost
#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#
# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed
#http_access deny dstdomain vk.com
http_access allow localnet
http_access allow localhost
# And finally deny all other access to this proxy
#http_access deny all
# Squid normally listens to port 3128
http_port 192.168.0.254:3120 intercept
https_port 3128 intercept ssl-bump generate-host-certificates=on dynamic_cert_mem_cache_size=16MB cert=/etc/squid/ssl_cert/myca.pem
http_port 3129 ssl-bump generate-host-certificates=on dynamic_cert_mem_cache_size=16MB cert=/etc/squid/ssl_cert/myca.pem
#http_port 192.168.0.254:3128 intercept
#https_port 192.168.0.254:3129 intercept ssl-bump options=ALL:NO_SSLv3:NO_SSLv2 connection-auth=off cert=/etc/squid/ssl_cert/myca.pem key=/etc/squid/ssl_cert/myca.pem
#https_port 192.168.0.254:3129
visible_hostname proxy.agix.local
# Uncomment and adjust the following to add a disk cache directory.
cache_dir ufs /var/spool/squid 200 16 256
# Leave coredumps in the first cache dir
coredump_dir /var/spool/squid
#
# Add any of your own refresh_pattern entries above these.
#
refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern -i (/cgi-bin/|\?) 0 0% 0
refresh_pattern . 0 20% 4320
#dns_v4_first on
