RSH-over-ICQ :-)

Быает же такое... Цитата из сегодняшних переговоров, имена изменены :-)

(11:45:45) The_Master: Значит слушай теперь внимательно: запусти fdisk /dev/sda

(11:46:18) The_Novice: The number of cylinders for this disk is set to 17750.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)

Command (m for help):

(11:46:54) The_Master: Я буду говорить какие буквы нажимать :-)

(11:47:00) The_Master: p

(11:47:04) The_Novice: ок

(11:47:19) The_Novice: Device Boot      Start         End      Blocks   Id  Syst
em
/dev/sda1   *           1         123      987966   83  Linux
/dev/sda2             124       17750   141588877+   5  Extended
/dev/sda5             124        1167     8385898+  83  Linux
/dev/sda6            1168        1428     2096451   82  Linux swap
/dev/sda7            1429        1559     1052226   83  Linux
/dev/sda8            1560        1690     1052226   83  Linux

(11:47:26) The_Master: n

(11:47:46) The_Novice: Command action
   l   logical (5 or over)
   p   primary partition (1-4)

(11:47:49) The_Master: l

(11:48:06) The_Novice: First cylinder (1691-17750, default 1691):

(11:48:20) The_Master: 1691

(11:48:50) The_Novice: Last cylinder or +size or +sizeM or +sizeK (1691-17750, d
efault 17750):

(11:48:57) The_Master: 17750

(11:49:16) The_Novice: Using default value 17750

(11:50:12) The_Master: t

(11:50:26) The_Novice: Partition number (1-9):

(11:50:29) The_Master: 9

(11:50:47) The_Novice: Hex code (type L to list codes):

(11:50:50) The_Master: L

(11:51:51) The_Novice:
 0  Empty           1c  Hidden W95 FAT3 70  DiskSecure Mult bb  Boot Wizard hid
 1  FAT12           1e  Hidden W95 FAT1 75  PC/IX           be  Solaris boot
 2  XENIX root      24  NEC DOS         80  Old Minix       c1  DRDOS/sec (FAT-
 3  XENIX usr       39  Plan 9          81  Minix / old Lin c4  DRDOS/sec (FAT-
 4  FAT16 <32M      3c  PartitionMagic  82  Linux swap      c6  DRDOS/sec (FAT-
 5  Extended        40  Venix 80286     83  Linux           c7  Syrinx
 6  FAT16           41  PPC PReP Boot   84  OS/2 hidden C:  da  Non-FS data
 7  HPFS/NTFS       42  SFS             85  Linux extended  db  CP/M / CTOS / .
 8  AIX             4d  QNX4.x          86  NTFS volume set de  Dell Utility
 9  AIX bootable    4e  QNX4.x 2nd part 87  NTFS volume set df  BootIt
 a  OS/2 Boot Manag 4f  QNX4.x 3rd part 8e  Linux LVM       e1  DOS access
 b  W95 FAT32       50  OnTrack DM      93  Amoeba          e3  DOS R/O
 c  W95 FAT32 (LBA) 51  OnTrack DM6 Aux 94  Amoeba BBT      e4  SpeedStor
 e  W95 FAT16 (LBA) 52  CP/M            9f  BSD/OS          eb  BeOS fs
 f  W95 Ext'd (LBA) 53  OnTrack DM6 Aux a0  IBM Thinkpad hi ee  EFI GPT
(11:52:28) The_Master: 8e
(11:52:48) The_Novice: Changed system type of partition 9 to 8e (Linux LVM)
(11:52:53) The_Master: w
(11:53:17) The_Novice: The partition table has been altered!

Calling ioctl() to re-read partition table.

WARNING: Re-reading the partition table failed with error 16: Device or resource
 busy.
The kernel still uses the old table.
The new table will be used at the next reboot.
Syncing disks.

(11:53:34) The_Master: Нормально. Теперь fdisk /dev/sdb

(11:54:08) The_Novice: There is nothing wrong with that, but this is larger than
 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)

Command (m for help):

(11:54:13) The_Master: n

(11:54:46) The_Novice: Command action
   e   extended
   p   primary partition (1-4)

(11:54:52) The_Master: p

(11:55:01) The_Master: Потом 1

(11:55:15) The_Novice: First cylinder (1-17750, default 1):

(11:55:22) The_Master: enter, enter

(11:55:27) The_Master: t

(11:55:29) The_Master: 8e

(11:55:31) The_Master: w

(11:55:57) The_Novice: The partition table has been altered!

Calling ioctl() to re-read partition table.
Syncing disks.