История изменений
Исправление steemandlinux, (текущая версия) :
https://ru.msi.com/Motherboard/945GCM5-F-V2/support#cpu
Найди мне тут вульф на 45 нм.
И первое поколение они поддерживают печально:
According to the Intel North Bridge 945GC chipset spec, this board supports CPU of FSB 800MHz at maximum by default . However, you may let your board running at FSB 1066MHz (Core 2 Duo CPUs) by overclocking and adjusting the CPU FSB frequency in the BIOS: Enter BIOS setup menu and go to [Frequency/Voltage Control] –> [Adjust CPU FSB Frequency]. There you can adjust the value to [266] for the Core 2 Duo E63XX/E64XX/ E66XX/E6700 CPUs. Please be noted that this is over-spec, and this overclocking behavior is not recommended and guaranteed.
Я тебя еще больше расстрою, материнские платы с 945 чипсетами, выпущенные во времена Pentium D, даже первое поколение core 2 не поддерживают, VRM не тот.
Исходная версия steemandlinux, :
https://ru.msi.com/Motherboard/945GCM5-F-V2/support#cpu
Найди мне тут вульф на 45 нм.
И первое поколение они поддерживают печально:
According to the Intel North Bridge 945GC chipset spec, this board supports CPU of FSB 800MHz at maximum by default . However, you may let your board running at FSB 1066MHz (Core 2 Duo CPUs) by overclocking and adjusting the CPU FSB frequency in the BIOS: Enter BIOS setup menu and go to [Frequency/Voltage Control] –> [Adjust CPU FSB Frequency]. There you can adjust the value to [266] for the Core 2 Duo E63XX/E64XX/ E66XX/E6700 CPUs. Please be noted that this is over-spec, and this overclocking behavior is not recommended and guaranteed.