Debian DHCP server и Windows 7

host wifiserega {
   hardware ethernet 0C:DF:A4:DF:FF:61;
   fixed-address 192.168.3.141;
}
host vasyanout {
   hardware ethernet E0:06:E6:27:56:86;
   fixed-address 192.168.3.145;
}

root@proxy:/etc/dhcp# cat dhcpd.conf 
#
# Sample configuration file for ISC dhcpd for Debian
#
#

# The ddns-updates-style parameter controls whether or not the server will
# attempt to do a DNS update when a lease is confirmed. We default to the
# behavior of the version 2 packages ('none', since DHCP v2 didn't
# have support for DDNS.)
ddns-update-style none;

# option definitions common to all supported networks...
#option domain-name "example.org";
#option domain-name-servers ns1.example.org, ns2.example.org;

#default-lease-time 600;
#max-lease-time 7200;

# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
authoritative;

# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
log-facility local7;

# No service will be given on this subnet, but declaring it helps the 
# DHCP server to understand the network topology.

#subnet 10.152.187.0 netmask 255.255.255.0 {
#}

# This is a very basic subnet declaration.

#subnet 10.254.239.0 netmask 255.255.255.224 {
#  range 10.254.239.10 10.254.239.20;
#  option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
#}

# This declaration allows BOOTP clients to get dynamic addresses,
# which we don't really recommend.

#subnet 10.254.239.32 netmask 255.255.255.224 {
#  range dynamic-bootp 10.254.239.40 10.254.239.60;
#  option broadcast-address 10.254.239.31;
#  option routers rtr-239-32-1.example.org;
#}

# настройки сети

   subnet 192.168.3.0 netmask 255.255.255.0 {
#  Диапазон выдаваемых адресов
#  range 10.5.5.26 10.5.5.30;
#  ip днс сервака
   option domain-name-servers 192.168.3.74;
#  option domain-name "internal.example.org";
#  ip шлюза
   option routers 192.168.3.125;
   option broadcast-address 192.168.3.255;
#  время аренды ip
   default-lease-time 600;
   max-lease-time 7200;
}

# Hosts which require special configuration options can be listed in
# host statements.   If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.

#host passacaglia {
#  hardware ethernet 0:0:c0:5d:bd:95;
#  filename "vmunix.passacaglia";
#  server-name "toccata.fugue.com";
#}

# Fixed IP addresses can also be specified for hosts.   These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.

host wifivovakip {
   hardware ethernet A0:71:A9:64:A2:B8;
   fixed-address 192.168.3.142;
}

host wifiserega {
   hardware ethernet 0C:DF:A4:DF:FF:61;
   fixed-address 192.168.3.141;
}

host wifiigor {
   hardware ethernet D0:B3:3F:38:E0:AD;
   fixed-address 192.168.3.143;
}

host telefonVM {
   hardware ethernet 0C:C6:6A:8B:04:E1;
   fixed-address 192.168.3.144;
}

host vasyanout {
   hardware ethernet E0:06:E6:27:56:86;
   fixed-address 192.168.3.145;
}
host vrem {
   hardware ethernet 9C:B7:0D:83:A4:53;
   fixed-address 192.168.3.146;
}
#You can declare a class of clients and then do address allocation
# based on that.   The example below shows a case where all clients
# in a certain class get addresses on the 10.17.224/24 subnet, and all
# other clients get addresses on the 10.0.29/24 subnet.

#class "foo" {
#  match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
#}

#shared-network 224-29 {
#  subnet 10.17.224.0 netmask 255.255.255.0 {
#    option routers rtr-224.example.org;
#  }
#  subnet 10.0.29.0 netmask 255.255.255.0 {
#    option routers rtr-29.example.org;
#  }
#  pool {
#    allow members of "foo";
#    range 10.17.224.10 10.17.224.250;
#  }
#  pool {
#    deny members of "foo";
#    range 10.0.29.10 10.0.29.230;
#  }
#}