AX210 Проблемы с bluetooth на manjaro

0

1

У меня ноутбук asus um3402yar с изначально установленным wifi контроллером mt792 на котором прекрасно работал bluetooth, но wifi не работал дальше 5 метров. Вчера заменил его на AX210 теперь wifi рвботает, а вот bluetooth даже не обнаруживается.

lsusb 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 1c7a:0587 LighTuning Technology Inc. ETU905A88-E
Bus 001 Device 003: ID 3277:0010 Sonix Technology Co., Ltd. USB2.0 FHD UVC WebCam
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 004 Device 002: ID 0951:1666 Kingston Technology DataTraveler 100 G3/G4/SE9 G2/50 Kyson

lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne Root Complex
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne IOMMU
00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
00:01.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge
00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
00:02.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge
00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir Internal PCIe GPP Bridge to Bus
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 51)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 5
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 6
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 7
01:00.0 Network controller: Intel Corporation Wi-Fi 6E(802.11ax) AX210/AX1675* 2x2 [Typhoon Peak] (rev 1a)
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader (rev 01)
03:00.0 Non-Volatile memory controller: Micron Technology Inc 2400 NVMe SSD (DRAM-less) (rev 03)
04:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Barcelo (rev c2)
04:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Renoir/Cezanne HDMI/DP Audio Controller
04:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Raven/Raven2/FireFlight/Renoir/Cezanne Platform Security Processor
04:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1
04:00.4 USB controller: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1
04:00.5 Multimedia controller: Advanced Micro Devices, Inc. [AMD] Audio Coprocessor (rev 01)
04:00.6 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h/19h/1ah HD Audio Controller

Поиск никаких решений не дает:(

Только что еще вот такой прикол нашел

[ 1362.561495] usb 3-4: new full-speed USB device number 5 using xhci_hcd
[ 1362.561611] usb 3-4: Device not responding to setup address.
[ 1362.769777] usb 3-4: Device not responding to setup address.
[ 1362.977442] usb 3-4: device not accepting address 5, error -71
[ 1362.977613] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1362.977707] usb usb3-port4: unable to enumerate USB device
[ 1622.901093] usb 3-4: new full-speed USB device number 6 using xhci_hcd
[ 1623.020968] usb 3-4: device descriptor read/64, error -71
[ 1623.246026] usb 3-4: device descriptor read/64, error -71
[ 1623.460904] usb 3-4: new full-speed USB device number 7 using xhci_hcd
[ 1623.580920] usb 3-4: device descriptor read/64, error -71
[ 1623.804966] usb 3-4: device descriptor read/64, error -71
[ 1623.909047] usb usb3-port4: attempt power cycle
[ 1624.287847] usb 3-4: new full-speed USB device number 8 using xhci_hcd
[ 1624.287943] usb 3-4: Device not responding to setup address.
[ 1624.493026] usb 3-4: Device not responding to setup address.
[ 1624.700878] usb 3-4: device not accepting address 8, error -71
[ 1624.700989] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1624.813184] usb 3-4: new full-speed USB device number 9 using xhci_hcd
[ 1624.813297] usb 3-4: Device not responding to setup address.
[ 1625.020972] usb 3-4: Device not responding to setup address.
[ 1625.228862] usb 3-4: device not accepting address 9, error -71
[ 1625.228980] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1625.229058] usb usb3-port4: unable to enumerate USB device
[ 1654.741070] usb 3-4: new full-speed USB device number 10 using xhci_hcd
[ 1654.861121] usb 3-4: device descriptor read/64, error -71
[ 1655.085087] usb 3-4: device descriptor read/64, error -71
[ 1655.301066] usb 3-4: new full-speed USB device number 11 using xhci_hcd
[ 1655.421098] usb 3-4: device descriptor read/64, error -71
[ 1655.645105] usb 3-4: device descriptor read/64, error -71
[ 1655.749187] usb usb3-port4: attempt power cycle
[ 1656.128060] usb 3-4: new full-speed USB device number 12 using xhci_hcd
[ 1656.128180] usb 3-4: Device not responding to setup address.
[ 1656.333362] usb 3-4: Device not responding to setup address.
[ 1656.541028] usb 3-4: device not accepting address 12, error -71
[ 1656.541146] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1656.653069] usb 3-4: new full-speed USB device number 13 using xhci_hcd
[ 1656.653189] usb 3-4: Device not responding to setup address.
[ 1656.861188] usb 3-4: Device not responding to setup address.
[ 1657.069062] usb 3-4: device not accepting address 13, error -71
[ 1657.069207] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1657.069306] usb usb3-port4: unable to enumerate USB device
[ 1664.806563] usb 3-4: new full-speed USB device number 14 using xhci_hcd
[ 1664.926189] usb 3-4: device descriptor read/64, error -71
[ 1665.149152] usb 3-4: device descriptor read/64, error -71
[ 1665.365112] usb 3-4: new full-speed USB device number 15 using xhci_hcd
[ 1665.485196] usb 3-4: device descriptor read/64, error -71
[ 1665.709139] usb 3-4: device descriptor read/64, error -71
[ 1665.813246] usb usb3-port4: attempt power cycle
[ 1666.192099] usb 3-4: new full-speed USB device number 16 using xhci_hcd
[ 1666.192173] usb 3-4: Device not responding to setup address.
[ 1666.397193] usb 3-4: Device not responding to setup address.
[ 1666.605110] usb 3-4: device not accepting address 16, error -71
[ 1666.605250] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1666.920350] usb 3-4: new full-speed USB device number 17 using xhci_hcd
[ 1666.920463] usb 3-4: Device not responding to setup address.
[ 1667.125205] usb 3-4: Device not responding to setup address.
[ 1667.333122] usb 3-4: device not accepting address 17, error -71
[ 1667.333258] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1667.333355] usb usb3-port4: unable to enumerate USB device
[ 1667.549132] usb 3-4: new full-speed USB device number 18 using xhci_hcd
[ 1667.669218] usb 3-4: device descriptor read/64, error -71
[ 1667.893198] usb 3-4: device descriptor read/64, error -71
[ 1668.109133] usb 3-4: new full-speed USB device number 19 using xhci_hcd
[ 1668.229391] usb 3-4: device descriptor read/64, error -71
[ 1668.453475] usb 3-4: device descriptor read/64, error -71
[ 1668.557285] usb usb3-port4: attempt power cycle
[ 1668.936145] usb 3-4: new full-speed USB device number 20 using xhci_hcd
[ 1668.936265] usb 3-4: Device not responding to setup address.
[ 1669.141259] usb 3-4: Device not responding to setup address.
[ 1669.349366] usb 3-4: device not accepting address 20, error -71
[ 1669.349503] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1669.664104] usb 3-4: new full-speed USB device number 21 using xhci_hcd
[ 1669.664223] usb 3-4: Device not responding to setup address.
[ 1669.869204] usb 3-4: Device not responding to setup address.
[ 1670.078144] usb 3-4: device not accepting address 21, error -71
[ 1670.078286] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1670.078381] usb usb3-port4: unable to enumerate USB device
[ 1670.295123] usb 3-4: new full-speed USB device number 22 using xhci_hcd
[ 1670.416234] usb 3-4: device descriptor read/64, error -71
[ 1670.637213] usb 3-4: device descriptor read/64, error -71
[ 1670.853153] usb 3-4: new full-speed USB device number 23 using xhci_hcd
[ 1670.973450] usb 3-4: device descriptor read/64, error -71
[ 1671.197216] usb 3-4: device descriptor read/64, error -71
[ 1671.301297] usb usb3-port4: attempt power cycle
[ 1671.681158] usb 3-4: new full-speed USB device number 24 using xhci_hcd
[ 1671.681283] usb 3-4: Device not responding to setup address.
[ 1671.885286] usb 3-4: Device not responding to setup address.
[ 1672.094150] usb 3-4: device not accepting address 24, error -71
[ 1672.094291] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1672.206169] usb 3-4: new full-speed USB device number 25 using xhci_hcd
[ 1672.206324] usb 3-4: Device not responding to setup address.
[ 1672.413476] usb 3-4: Device not responding to setup address.
[ 1672.621339] usb 3-4: device not accepting address 25, error -71
[ 1672.621475] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1672.621575] usb usb3-port4: unable to enumerate USB device
[ 1679.141196] usb 3-4: new full-speed USB device number 26 using xhci_hcd
[ 1679.261265] usb 3-4: device descriptor read/64, error -71
[ 1679.485248] usb 3-4: device descriptor read/64, error -71
[ 1679.701192] usb 3-4: new full-speed USB device number 27 using xhci_hcd
[ 1679.823285] usb 3-4: device descriptor read/64, error -71
[ 1680.045294] usb 3-4: device descriptor read/64, error -71
[ 1680.149363] usb usb3-port4: attempt power cycle
[ 1680.528221] usb 3-4: new full-speed USB device number 28 using xhci_hcd
[ 1680.528358] usb 3-4: Device not responding to setup address.
[ 1680.733304] usb 3-4: Device not responding to setup address.
[ 1680.941211] usb 3-4: device not accepting address 28, error -71
[ 1680.941352] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1681.053215] usb 3-4: new full-speed USB device number 29 using xhci_hcd
[ 1681.053333] usb 3-4: Device not responding to setup address.
[ 1681.261554] usb 3-4: Device not responding to setup address.
[ 1681.469189] usb 3-4: device not accepting address 29, error -71
[ 1681.469326] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1681.469422] usb usb3-port4: unable to enumerate USB device
[ 1682.749240] usb 3-4: new full-speed USB device number 30 using xhci_hcd
[ 1683.072264] usb 3-4: device descriptor read/64, error -71
[ 1683.293272] usb 3-4: device descriptor read/64, error -71
[ 1683.509242] usb 3-4: new full-speed USB device number 31 using xhci_hcd
[ 1683.896328] usb 3-4: device descriptor read/64, error -71
[ 1684.117332] usb 3-4: device descriptor read/64, error -71
[ 1684.221413] usb usb3-port4: attempt power cycle
[ 1684.600211] usb 3-4: new full-speed USB device number 32 using xhci_hcd
[ 1684.600327] usb 3-4: Device not responding to setup address.
[ 1684.805595] usb 3-4: Device not responding to setup address.
[ 1685.013597] usb 3-4: device not accepting address 32, error -71
[ 1685.013704] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1685.126265] usb 3-4: new full-speed USB device number 33 using xhci_hcd
[ 1685.126374] usb 3-4: Device not responding to setup address.
[ 1685.333304] usb 3-4: Device not responding to setup address.
[ 1685.541247] usb 3-4: device not accepting address 33, error -71
[ 1685.541355] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1685.541452] usb usb3-port4: unable to enumerate USB device
[ 1701.007591] usb 3-4: new full-speed USB device number 34 using xhci_hcd
[ 1701.128407] usb 3-4: device descriptor read/64, error -71
[ 1701.348493] usb 3-4: device descriptor read/64, error -71
[ 1701.768357] usb 3-4: new full-speed USB device number 35 using xhci_hcd
[ 1701.888590] usb 3-4: device descriptor read/64, error -71
[ 1702.109396] usb 3-4: device descriptor read/64, error -71
[ 1702.213496] usb usb3-port4: attempt power cycle
[ 1702.592559] usb 3-4: new full-speed USB device number 36 using xhci_hcd
[ 1702.592678] usb 3-4: Device not responding to setup address.
[ 1702.797477] usb 3-4: Device not responding to setup address.
[ 1703.005406] usb 3-4: device not accepting address 36, error -71
[ 1703.005544] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1703.117399] usb 3-4: new full-speed USB device number 37 using xhci_hcd
[ 1703.117520] usb 3-4: Device not responding to setup address.
[ 1703.325478] usb 3-4: Device not responding to setup address.
[ 1703.533366] usb 3-4: device not accepting address 37, error -71
[ 1703.533475] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1703.533596] usb usb3-port4: unable to enumerate USB device
[ 1704.163383] usb 3-4: new full-speed USB device number 38 using xhci_hcd
[ 1704.282670] usb 3-4: device descriptor read/64, error -71
[ 1704.509639] usb 3-4: device descriptor read/64, error -71
[ 1704.727394] usb 3-4: new full-speed USB device number 39 using xhci_hcd
[ 1704.847441] usb 3-4: device descriptor read/64, error -71
[ 1705.068440] usb 3-4: device descriptor read/64, error -71
[ 1705.173544] usb usb3-port4: attempt power cycle
[ 1705.968404] usb 3-4: new full-speed USB device number 40 using xhci_hcd
[ 1705.968481] usb 3-4: Device not responding to setup address.
[ 1706.174526] usb 3-4: Device not responding to setup address.
[ 1706.381474] usb 3-4: device not accepting address 40, error -71
[ 1706.381589] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1708.101472] usb usb3-port4: Cannot enable. Maybe the USB cable is bad?
[ 1708.101616] usb usb3-port4: unable to enumerate USB device
[ 1708.533390] usb 3-4: new full-speed USB device number 42 using xhci_hcd
[ 1708.856451] usb 3-4: device descriptor read/64, error -71
[ 1709.076579] usb 3-4: device descriptor read/64, error -71
[ 1709.293398] usb 3-4: new full-speed USB device number 43 using xhci_hcd
[ 1709.413466] usb 3-4: device descriptor read/64, error -71
[ 1709.637489] usb 3-4: device descriptor read/64, error -71
[ 1709.741552] usb usb3-port4: attempt power cycle
[ 1710.120436] usb 3-4: new full-speed USB device number 44 using xhci_hcd
[ 1710.120561] usb 3-4: Device not responding to setup address.
[ 1710.325754] usb 3-4: Device not responding to setup address.
[ 1710.533655] usb 3-4: device not accepting address 44, error -71
[ 1710.533795] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1710.645613] usb 3-4: new full-speed USB device number 45 using xhci_hcd
[ 1710.645751] usb 3-4: Device not responding to setup address.
[ 1710.853719] usb 3-4: Device not responding to setup address.
[ 1711.061449] usb 3-4: device not accepting address 45, error -71
[ 1711.061591] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1711.061687] usb usb3-port4: unable to enumerate USB device
[ 1711.885459] usb 3-4: new full-speed USB device number 46 using xhci_hcd
[ 1712.005715] usb 3-4: device descriptor read/64, error -71
[ 1712.228500] usb 3-4: device descriptor read/64, error -71
[ 1712.445459] usb 3-4: new full-speed USB device number 47 using xhci_hcd
[ 1712.565707] usb 3-4: device descriptor read/64, error -71
[ 1712.788514] usb 3-4: device descriptor read/64, error -71
[ 1712.893588] usb usb3-port4: attempt power cycle
[ 1713.272430] usb 3-4: new full-speed USB device number 48 using xhci_hcd
[ 1713.272536] usb 3-4: Device not responding to setup address.
[ 1713.477599] usb 3-4: Device not responding to setup address.
[ 1713.685453] usb 3-4: device not accepting address 48, error -71
[ 1713.685567] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1713.797453] usb 3-4: new full-speed USB device number 49 using xhci_hcd
[ 1713.797580] usb 3-4: Device not responding to setup address.
[ 1714.005593] usb 3-4: Device not responding to setup address.
[ 1714.213694] usb 3-4: device not accepting address 49, error -71
[ 1714.213839] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1714.213935] usb usb3-port4: unable to enumerate USB device
[ 1714.507442] usb 3-4: new full-speed USB device number 50 using xhci_hcd
[ 1714.896527] usb 3-4: device descriptor read/64, error -71
[ 1715.944541] usb 3-4: device descriptor read/64, error -71
[ 1716.360519] usb 3-4: new full-speed USB device number 51 using xhci_hcd
[ 1716.480755] usb 3-4: device descriptor read/64, error -71
[ 1716.904754] usb 3-4: device descriptor read/64, error -71
[ 1717.005630] usb usb3-port4: attempt power cycle
[ 1717.384497] usb 3-4: new full-speed USB device number 52 using xhci_hcd
[ 1717.384614] usb 3-4: Device not responding to setup address.
[ 1717.589635] usb 3-4: Device not responding to setup address.
[ 1717.797486] usb 3-4: device not accepting address 52, error -71
[ 1717.797597] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1718.112510] usb 3-4: new full-speed USB device number 53 using xhci_hcd
[ 1718.112632] usb 3-4: Device not responding to setup address.
[ 1718.317573] usb 3-4: Device not responding to setup address.
[ 1718.525717] usb 3-4: device not accepting address 53, error -71
[ 1718.525829] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1718.525925] usb usb3-port4: unable to enumerate USB device
[ 1719.125493] usb 3-4: new full-speed USB device number 54 using xhci_hcd
[ 1719.244526] usb 3-4: device descriptor read/64, error -71
[ 1719.468557] usb 3-4: device descriptor read/64, error -71
[ 1719.685745] usb 3-4: new full-speed USB device number 55 using xhci_hcd
[ 1719.804774] usb 3-4: device descriptor read/64, error -71
[ 1720.029611] usb 3-4: device descriptor read/64, error -71
[ 1720.133704] usb usb3-port4: attempt power cycle
[ 1720.512514] usb 3-4: new full-speed USB device number 56 using xhci_hcd
[ 1720.512634] usb 3-4: Device not responding to setup address.
[ 1720.717637] usb 3-4: Device not responding to setup address.
[ 1720.926517] usb 3-4: device not accepting address 56, error -71
[ 1720.926625] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1721.038537] usb 3-4: new full-speed USB device number 57 using xhci_hcd
[ 1721.038649] usb 3-4: Device not responding to setup address.
[ 1721.245606] usb 3-4: Device not responding to setup address.
[ 1721.453623] usb 3-4: device not accepting address 57, error -71
[ 1721.453732] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1721.454083] usb usb3-port4: unable to enumerate USB device
[ 1723.317537] usb 3-4: new full-speed USB device number 58 using xhci_hcd
[ 1723.436807] usb 3-4: device descriptor read/64, error -71
[ 1723.661606] usb 3-4: device descriptor read/64, error -71
[ 1723.878513] usb 3-4: new full-speed USB device number 59 using xhci_hcd
[ 1723.997586] usb 3-4: device descriptor read/64, error -71
[ 1724.221608] usb 3-4: device descriptor read/64, error -71
[ 1724.325953] usb usb3-port4: attempt power cycle
[ 1724.704551] usb 3-4: new full-speed USB device number 60 using xhci_hcd
[ 1724.704685] usb 3-4: Device not responding to setup address.
[ 1724.909652] usb 3-4: Device not responding to setup address.
[ 1725.117548] usb 3-4: device not accepting address 60, error -71
[ 1725.117694] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1725.229573] usb 3-4: new full-speed USB device number 61 using xhci_hcd
[ 1725.229695] usb 3-4: Device not responding to setup address.
[ 1725.438669] usb 3-4: Device not responding to setup address.
[ 1725.645550] usb 3-4: device not accepting address 61, error -71
[ 1725.645661] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1725.645760] usb usb3-port4: unable to enumerate USB device
[ 1730.821606] usb 3-4: new full-speed USB device number 62 using xhci_hcd
[ 1730.940682] usb 3-4: device descriptor read/64, error -71
[ 1731.164884] usb 3-4: device descriptor read/64, error -71
[ 1731.381600] usb 3-4: new full-speed USB device number 63 using xhci_hcd
[ 1731.501671] usb 3-4: device descriptor read/64, error -71
[ 1731.724657] usb 3-4: device descriptor read/64, error -71
[ 1731.829773] usb usb3-port4: attempt power cycle
[ 1732.208720] usb 3-4: new full-speed USB device number 64 using xhci_hcd
[ 1732.208842] usb 3-4: Device not responding to setup address.
[ 1732.413737] usb 3-4: Device not responding to setup address.
[ 1732.621606] usb 3-4: device not accepting address 64, error -71
[ 1732.621752] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1732.733610] usb 3-4: new full-speed USB device number 65 using xhci_hcd
[ 1732.733730] usb 3-4: Device not responding to setup address.
[ 1732.941735] usb 3-4: Device not responding to setup address.
[ 1733.149623] usb 3-4: device not accepting address 65, error -71
[ 1733.149730] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1733.149826] usb usb3-port4: unable to enumerate USB device
[ 1734.461830] usb 3-4: new full-speed USB device number 66 using xhci_hcd
[ 1734.580669] usb 3-4: device descriptor read/64, error -71
[ 1734.804688] usb 3-4: device descriptor read/64, error -71
[ 1735.022656] usb 3-4: new full-speed USB device number 67 using xhci_hcd
[ 1735.142694] usb 3-4: device descriptor read/64, error -71
[ 1735.364919] usb 3-4: device descriptor read/64, error -71
[ 1735.469987] usb usb3-port4: attempt power cycle
[ 1735.848668] usb 3-4: new full-speed USB device number 68 using xhci_hcd
[ 1735.848784] usb 3-4: Device not responding to setup address.
[ 1736.053824] usb 3-4: Device not responding to setup address.
[ 1736.261656] usb 3-4: device not accepting address 68, error -71
[ 1736.261766] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1736.373644] usb 3-4: new full-speed USB device number 69 using xhci_hcd
[ 1736.373753] usb 3-4: Device not responding to setup address.
[ 1736.581762] usb 3-4: Device not responding to setup address.
[ 1736.789642] usb 3-4: device not accepting address 69, error -71
[ 1736.789764] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1736.789860] usb usb3-port4: unable to enumerate USB device
[ 1739.294658] usb 3-4: new full-speed USB device number 70 using xhci_hcd
[ 1739.414723] usb 3-4: device descriptor read/64, error -71
[ 1739.637732] usb 3-4: device descriptor read/64, error -71
[ 1739.853730] usb 3-4: new full-speed USB device number 71 using xhci_hcd
[ 1739.972751] usb 3-4: device descriptor read/64, error -71
[ 1740.196784] usb 3-4: device descriptor read/64, error -71
[ 1740.301839] usb usb3-port4: attempt power cycle
[ 1740.680708] usb 3-4: new full-speed USB device number 72 using xhci_hcd
[ 1740.680824] usb 3-4: Device not responding to setup address.
[ 1740.885798] usb 3-4: Device not responding to setup address.
[ 1741.093710] usb 3-4: device not accepting address 72, error -71
[ 1741.093831] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1741.206718] usb 3-4: new full-speed USB device number 73 using xhci_hcd
[ 1741.206831] usb 3-4: Device not responding to setup address.
[ 1741.413775] usb 3-4: Device not responding to setup address.
[ 1741.621680] usb 3-4: device not accepting address 73, error -71
[ 1741.621844] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1741.621940] usb usb3-port4: unable to enumerate USB device
[ 1741.915685] usb 3-4: new full-speed USB device number 74 using xhci_hcd
[ 1742.034747] usb 3-4: device descriptor read/64, error -71
[ 1742.261744] usb 3-4: device descriptor read/64, error -71
[ 1742.478743] usb 3-4: new full-speed USB device number 75 using xhci_hcd
[ 1742.598758] usb 3-4: device descriptor read/64, error -71
[ 1742.821769] usb 3-4: device descriptor read/64, error -71
[ 1742.926837] usb usb3-port4: attempt power cycle
[ 1743.304723] usb 3-4: new full-speed USB device number 76 using xhci_hcd
[ 1743.304831] usb 3-4: Device not responding to setup address.
[ 1743.509995] usb 3-4: Device not responding to setup address.
[ 1743.717711] usb 3-4: device not accepting address 76, error -71
[ 1743.717820] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1782.270114] usb 3-4: new full-speed USB device number 78 using xhci_hcd
[ 1782.389390] usb 3-4: device descriptor read/64, error -71
[ 1782.613151] usb 3-4: device descriptor read/64, error -71
[ 1782.830320] usb 3-4: new full-speed USB device number 79 using xhci_hcd
[ 1782.950193] usb 3-4: device descriptor read/64, error -71
[ 1783.173400] usb 3-4: device descriptor read/64, error -71
[ 1783.278268] usb usb3-port4: attempt power cycle
[ 1783.657093] usb 3-4: new full-speed USB device number 80 using xhci_hcd
[ 1783.657252] usb 3-4: Device not responding to setup address.
[ 1783.862207] usb 3-4: Device not responding to setup address.
[ 1784.070115] usb 3-4: device not accepting address 80, error -71
[ 1784.070258] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1784.182375] usb 3-4: new full-speed USB device number 81 using xhci_hcd
[ 1784.182524] usb 3-4: Device not responding to setup address.
[ 1784.390220] usb 3-4: Device not responding to setup address.
[ 1784.598326] usb 3-4: device not accepting address 81, error -71
[ 1784.598439] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1784.598536] usb usb3-port4: unable to enumerate USB device
[ 1788.398163] usb 3-4: new full-speed USB device number 82 using xhci_hcd
[ 1788.517191] usb 3-4: device descriptor read/64, error -71
[ 1788.741197] usb 3-4: device descriptor read/64, error -71
[ 1788.958127] usb 3-4: new full-speed USB device number 83 using xhci_hcd
[ 1789.077472] usb 3-4: device descriptor read/64, error -71
[ 1789.301211] usb 3-4: device descriptor read/64, error -71
[ 1789.406370] usb usb3-port4: attempt power cycle
[ 1789.785160] usb 3-4: new full-speed USB device number 84 using xhci_hcd
[ 1789.785276] usb 3-4: Device not responding to setup address.
[ 1789.990245] usb 3-4: Device not responding to setup address.
[ 1790.198375] usb 3-4: device not accepting address 84, error -71
[ 1790.198513] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1790.310258] usb 3-4: new full-speed USB device number 85 using xhci_hcd
[ 1790.310373] usb 3-4: Device not responding to setup address.
[ 1790.518278] usb 3-4: Device not responding to setup address.
[ 1790.726140] usb 3-4: device not accepting address 85, error -71
[ 1790.726256] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1790.726352] usb usb3-port4: unable to enumerate USB device
[ 1949.637394] usb 3-4: new full-speed USB device number 86 using xhci_hcd
[ 1950.646488] usb 3-4: device descriptor read/64, error -71
[ 1951.342581] usb 3-4: device descriptor read/64, error -71
[ 1951.555434] usb 3-4: new full-speed USB device number 87 using xhci_hcd
[ 1952.566560] usb 3-4: device descriptor read/64, error -71
[ 1952.787590] usb 3-4: device descriptor read/64, error -71
[ 1952.891692] usb usb3-port4: attempt power cycle
[ 1953.687524] usb 3-4: new full-speed USB device number 88 using xhci_hcd
[ 1953.687664] usb 3-4: Device not responding to setup address.
[ 1953.891611] usb 3-4: Device not responding to setup address.
[ 1954.099507] usb 3-4: device not accepting address 88, error -71
[ 1954.099643] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1954.414845] usb 3-4: new full-speed USB device number 89 using xhci_hcd
[ 1954.414963] usb 3-4: Device not responding to setup address.
[ 1954.619632] usb 3-4: Device not responding to setup address.
[ 1954.827534] usb 3-4: device not accepting address 89, error -71
[ 1954.827666] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1954.827761] usb usb3-port4: unable to enumerate USB device
[ 1955.043545] usb 3-4: new full-speed USB device number 90 using xhci_hcd
[ 1955.162815] usb 3-4: device descriptor read/64, error -71
[ 1955.386619] usb 3-4: device descriptor read/64, error -71
[ 1955.603604] usb 3-4: new full-speed USB device number 91 using xhci_hcd
[ 1955.722610] usb 3-4: device descriptor read/64, error -71
[ 1955.947655] usb 3-4: device descriptor read/64, error -71
[ 1956.051766] usb usb3-port4: attempt power cycle
[ 1956.430598] usb 3-4: new full-speed USB device number 92 using xhci_hcd
[ 1956.430739] usb 3-4: Device not responding to setup address.
[ 1956.635706] usb 3-4: Device not responding to setup address.
[ 1956.843594] usb 3-4: device not accepting address 92, error -71
[ 1956.843692] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1956.956630] usb 3-4: new full-speed USB device number 93 using xhci_hcd
[ 1956.956745] usb 3-4: Device not responding to setup address.
[ 1957.164033] usb 3-4: Device not responding to setup address.
[ 1957.371818] usb 3-4: device not accepting address 93, error -71
[ 1957.371923] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1957.372019] usb usb3-port4: unable to enumerate USB device
[ 1958.027662] usb 3-4: new full-speed USB device number 94 using xhci_hcd
[ 1958.146716] usb 3-4: device descriptor read/64, error -71
[ 1958.372736] usb 3-4: device descriptor read/64, error -71
[ 1958.587689] usb 3-4: new full-speed USB device number 95 using xhci_hcd
[ 1958.706759] usb 3-4: device descriptor read/64, error -71
[ 1958.931730] usb 3-4: device descriptor read/64, error -71
[ 1959.035869] usb usb3-port4: attempt power cycle
[ 1959.414915] usb 3-4: new full-speed USB device number 96 using xhci_hcd
[ 1959.415029] usb 3-4: Device not responding to setup address.
[ 1959.619803] usb 3-4: Device not responding to setup address.
[ 1959.827695] usb 3-4: device not accepting address 96, error -71
[ 1959.827841] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1959.939967] usb 3-4: new full-speed USB device number 97 using xhci_hcd
[ 1959.940096] usb 3-4: Device not responding to setup address.
[ 1960.147805] usb 3-4: Device not responding to setup address.
[ 1960.355709] usb 3-4: device not accepting address 97, error -71
[ 1960.355827] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1960.355923] usb usb3-port4: unable to enumerate USB device
[ 1986.316495] usb 3-4: new full-speed USB device number 98 using xhci_hcd
[ 1986.436546] usb 3-4: device descriptor read/64, error -71
[ 1986.660586] usb 3-4: device descriptor read/64, error -71
[ 1986.876536] usb 3-4: new full-speed USB device number 99 using xhci_hcd
[ 1986.996590] usb 3-4: device descriptor read/64, error -71
[ 1987.220816] usb 3-4: device descriptor read/64, error -71
[ 1987.324716] usb usb3-port4: attempt power cycle
[ 1987.703571] usb 3-4: new full-speed USB device number 100 using xhci_hcd
[ 1987.703705] usb 3-4: Device not responding to setup address.
[ 1987.908659] usb 3-4: Device not responding to setup address.
[ 1988.116822] usb 3-4: device not accepting address 100, error -71
[ 1988.116935] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1988.228562] usb 3-4: new full-speed USB device number 101 using xhci_hcd
[ 1988.228699] usb 3-4: Device not responding to setup address.
[ 1988.436622] usb 3-4: Device not responding to setup address.
[ 1988.644590] usb 3-4: device not accepting address 101, error -71
[ 1988.644703] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1988.644801] usb usb3-port4: unable to enumerate USB device
[ 1988.860775] usb 3-4: new full-speed USB device number 102 using xhci_hcd
[ 1988.980650] usb 3-4: device descriptor read/64, error -71
[ 1989.204695] usb 3-4: device descriptor read/64, error -71
[ 1989.420640] usb 3-4: new full-speed USB device number 103 using xhci_hcd
[ 1989.540884] usb 3-4: device descriptor read/64, error -71
[ 1989.764632] usb 3-4: device descriptor read/64, error -71
[ 1989.868817] usb usb3-port4: attempt power cycle
[ 1990.247637] usb 3-4: new full-speed USB device number 104 using xhci_hcd
[ 1990.247776] usb 3-4: Device not responding to setup address.
[ 1990.452680] usb 3-4: Device not responding to setup address.
[ 1990.660648] usb 3-4: device not accepting address 104, error -71
[ 1990.660765] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1990.975880] usb 3-4: new full-speed USB device number 105 using xhci_hcd
[ 1990.975997] usb 3-4: Device not responding to setup address.
[ 1991.180708] usb 3-4: Device not responding to setup address.
[ 1991.388867] usb 3-4: device not accepting address 105, error -71
[ 1991.388981] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1991.389077] usb usb3-port4: unable to enumerate USB device
[ 1991.605683] usb 3-4: new full-speed USB device number 106 using xhci_hcd
[ 1991.725773] usb 3-4: device descriptor read/64, error -71
[ 1991.949999] usb 3-4: device descriptor read/64, error -71
[ 1992.164680] usb 3-4: new full-speed USB device number 107 using xhci_hcd
[ 1992.283727] usb 3-4: device descriptor read/64, error -71
[ 1992.508737] usb 3-4: device descriptor read/64, error -71
[ 1992.612926] usb usb3-port4: attempt power cycle
[ 1992.991719] usb 3-4: new full-speed USB device number 108 using xhci_hcd
[ 1992.991844] usb 3-4: Device not responding to setup address.
[ 1993.196795] usb 3-4: Device not responding to setup address.
[ 1993.404685] usb 3-4: device not accepting address 108, error -71
[ 1993.404826] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1993.516715] usb 3-4: new full-speed USB device number 109 using xhci_hcd
[ 1993.516857] usb 3-4: Device not responding to setup address.
[ 1993.724846] usb 3-4: Device not responding to setup address.
[ 1993.932727] usb 3-4: device not accepting address 109, error -71
[ 1993.932843] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1993.932939] usb usb3-port4: unable to enumerate USB device
[ 1995.373121] usb 3-4: new full-speed USB device number 110 using xhci_hcd
[ 1995.491847] usb 3-4: device descriptor read/64, error -71
[ 1995.716840] usb 3-4: device descriptor read/64, error -71
[ 1995.932805] usb 3-4: new full-speed USB device number 111 using xhci_hcd
[ 1996.052836] usb 3-4: device descriptor read/64, error -71
[ 1996.275862] usb 3-4: device descriptor read/64, error -71
[ 1996.380944] usb usb3-port4: attempt power cycle
[ 1996.760087] usb 3-4: new full-speed USB device number 112 using xhci_hcd
[ 1996.760224] usb 3-4: Device not responding to setup address.
[ 1996.964902] usb 3-4: Device not responding to setup address.
[ 1997.172832] usb 3-4: device not accepting address 112, error -71
[ 1997.172940] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1997.285121] usb 3-4: new full-speed USB device number 113 using xhci_hcd
[ 1997.285235] usb 3-4: Device not responding to setup address.
[ 1997.492964] usb 3-4: Device not responding to setup address.
[ 1997.700830] usb 3-4: device not accepting address 113, error -71
[ 1997.700961] usb 3-4: WARN: invalid context state for evaluate context command.
[ 1997.701055] usb usb3-port4: unable to enumerate USB device
[ 1998.564833] usb 3-4: new full-speed USB device number 114 using xhci_hcd
[ 1998.683903] usb 3-4: device descriptor read/64, error -71
[ 1998.907926] usb 3-4: device descriptor read/64, error -71
[ 1999.124895] usb 3-4: new full-speed USB device number 115 using xhci_hcd
[ 1999.244946] usb 3-4: device descriptor read/64, error -71
[ 1999.467963] usb 3-4: device descriptor read/64, error -71
[ 1999.573072] usb usb3-port4: attempt power cycle
[ 1999.951915] usb 3-4: new full-speed USB device number 116 using xhci_hcd
[ 1999.952026] usb 3-4: Device not responding to setup address.
[ 2000.157027] usb 3-4: Device not responding to setup address.
[ 2000.365126] usb 3-4: device not accepting address 116, error -71
[ 2000.365238] usb 3-4: WARN: invalid context state for evaluate context command.
[ 2000.476903] usb 3-4: new full-speed USB device number 117 using xhci_hcd
[ 2000.477021] usb 3-4: Device not responding to setup address.
[ 2000.685031] usb 3-4: Device not responding to setup address.
[ 2000.892938] usb 3-4: device not accepting address 117, error -71
[ 2000.893049] usb 3-4: WARN: invalid context state for evaluate context command.
[ 2000.893146] usb usb3-port4: unable to enumerate USB device
[ 2708.315306] usb 3-4: new full-speed USB device number 118 using xhci_hcd
[ 2708.434562] usb 3-4: device descriptor read/64, error -71
[ 2708.658407] usb 3-4: device descriptor read/64, error -71
[ 2708.875335] usb 3-4: new full-speed USB device number 119 using xhci_hcd
[ 2708.994414] usb 3-4: device descriptor read/64, error -71
[ 2709.218390] usb 3-4: device descriptor read/64, error -71
[ 2709.323788] usb usb3-port4: attempt power cycle
[ 2709.702349] usb 3-4: new full-speed USB device number 120 using xhci_hcd
[ 2709.702460] usb 3-4: Device not responding to setup address.
[ 2709.907624] usb 3-4: Device not responding to setup address.
[ 2710.115359] usb 3-4: device not accepting address 120, error -71
[ 2710.115502] usb 3-4: WARN: invalid context state for evaluate context command.
[ 2710.227394] usb 3-4: new full-speed USB device number 121 using xhci_hcd
[ 2710.227504] usb 3-4: Device not responding to setup address.
[ 2710.435467] usb 3-4: Device not responding to setup address.
[ 2710.644361] usb 3-4: device not accepting address 121, error -71
[ 2710.644475] usb 3-4: WARN: invalid context state for evaluate context command.
[ 2710.644570] usb usb3-port4: unable to enumerate USB device
[ 3770.708731] usb 1-2: reset high-speed USB device number 2 using xhci_hcd
[ 3770.980825] usb 1-2: reset high-speed USB device number 2 using xhci_hcd

←	HDD редко издает тихие странные звуки

В дуалбуте также установлена windows 10, в ней вроде как все работает после установки драйверов

andrsoin06
(27.09.25 02:50:30 MSK) автор топика

Иногда проблемы в линуксе есть из-за реализации «сосуществования» вайфая и блютуса на устройстве. Для этого в некоторых модулях предусмотрена опция bt_coex или как-то так. Тебе может даже и карту менять не надо было, только включить эту опцию.

Сейчас у тебя AX210, посмотри параметры модуля для неё: modinfo iwlwifi

parm:           debug:debug output mask (uint)
parm:           swcrypto:using crypto in software (default 0 [hardware]) (int)
parm:           11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint)
parm:           amsdu_size:amsdu size 0: 12K for multi Rx queue devices, 2K for AX210 devices, 4K for other devices 1:4K 2:8K 3:12K (16K buffers) 4: 2K (default 0) (int)
parm:           fw_restart:restart firmware in case of error (default true) (bool)
parm:           nvm_file:NVM file name (charp)
parm:           uapsd_disable:disable U-APSD functionality bitmap 1: BSS 2: P2P Client (default: 3) (uint)
parm:           enable_ini:0:disable, 1-15:FW_DBG_PRESET Values, 16:enabled without preset value defined,Debug INI TLV FW debug infrastructure (default: 16) (uint)
parm:           bt_coex_active:enable wifi/bt co-exist (default: enable) (bool)
parm:           led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int)
parm:           power_save:enable WiFi power management (default: disable) (bool)
parm:           power_level:default power save level (range from 1 - 5, default: 1) (int)
parm:           disable_11ac:Disable VHT capabilities (default: false) (bool)
parm:           remove_when_gone:Remove dev from PCIe bus if it is deemed inaccessible (default: false) (bool)
parm:           disable_11ax:Disable HE capabilities (default: false) (bool)
parm:           disable_11be:Disable EHT capabilities (default: false) (bool)

Видишь bt_coex_active? Вот тебе надо выяснить, для начала, включен у тебя этот параметр, или нет. Посмотри в /sys/module/iwlwifi/parameters/ там всё есть, а если нет, то значение, можно предположить, умолчанию. Потом почитайэту ссылку: https://community.intel.com/t5/Wireless/AX210-Bluetooth-adapter-not-shwowing-...

R_He_Po6oT ★★★★★
(27.09.25 14:33:41 MSK)

Ответ на: комментарий от R_He_Po6oT 27.09.25 14:33:41 MSK

modinfo iwlwifi возвращает следующее

andrsoin06
(27.09.25 15:52:54 MSK) автор топика

Ответ на: комментарий от andrsoin06 27.09.25 15:52:54 MSK


parm: debug:debug output mask (uint) parm: swcrypto:using crypto in software (default 0 [hardware]) (int) parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint) parm: amsdu_size:amsdu size 0: 12K for multi Rx queue devices, 2K for AX210 devices, 4K for other devices 1:4K 2:8K 3:12K (16K buffers) 4: 2K (default 0) (int) parm: fw_restart:restart firmware in case of error (default true) (bool) parm: nvm_file:NVM file name (charp) parm: uapsd_disable:disable U-APSD functionality bitmap 1: BSS 2: P2P Client (default: 3) (uint) parm: enable_ini:0:disable, 1-15:FW_DBG_PRESET Values, 16:enabled without preset value defined,Debug INI TLV FW debug infrastructure (default: 16) (uint) parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool) parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int) parm: power_save:enable WiFi power management (default: disable) (bool) parm: power_level:default power save level (range from 1 - 5, default: 1) (int) parm: disable_11ac:Disable VHT capabilities (default: false) (bool) parm: remove_when_gone:Remove dev from PCIe bus if it is deemed inaccessible (default: false) (bool) parm: disable_11ax:Disable HE capabilities (default: false) (bool) parm: disable_11be:Disable EHT capabilities (default: false) (bool)

Пробежался также по статье которую скинули, в итоге как я понял проблема так и не была решена. hciconfig -a у меня также не возвращает ничего, а modinfo btintel


filename: /lib/modules/6.16.8-1-MANJARO/kernel/drivers/bluetooth/btintel.ko.zst firmware: intel/ibt-12-16.ddc firmware: intel/ibt-12-16.sfi firmware: intel/ibt-11-5.ddc firmware: intel/ibt-11-5.sfi license: GPL version: 0.1 description: Bluetooth support for Intel devices ver 0.1 author: Marcel Holtmann marcel@holtmann.org srcversion: 57F56668459627898169D9C depends: bluetooth intree: Y name: btintel retpoline: Y vermagic: 6.16.8-1-MANJARO SMP preempt mod_unload sig_id: PKCS#7 signer: Build time autogenerated kernel key sig_key: 54:B2:3A:86:E2:91:C6:C4:4B:97:58:62:6B:B6:29:A1:E3:5A:3B:F3 sig_hashalgo: sha512 signature: 30:65:02:31:00:DA:36:32:C7:2C:2B:57:45:9E:73:12:9E:F1:C5:9C: 9A:42:EB:4C:33:49:FA:6B:86:3D:CD:64:25:18:AD:42:DE:95:3A:A0: A9:9F:BC:E2:83:88:50:1E:8B:7A:6F:7A:00:02:30:5B:D2:39:26:80: A6:39:02:FA:1B:19:DF:4D:B3:DE:7A:AD:1F:DA:4A:7F:84:F6:2F:13: B4:B5:22:4F:D2:B9:6D:9C:07:4A:70:24:6F:3A:77:A6:87:5E:A7:CD: 63:EC:39

andrsoin06
(27.09.25 15:58:48 MSK) автор топика

Ответ на: комментарий от andrsoin06 27.09.25 15:52:54 MSK

А фирмвари поставил? Что видишь в /sys/module/iwlwifi/parameters/ ? Туда смотрел?

R_He_Po6oT ★★★★★
(27.09.25 17:19:24 MSK)

у меня AX210. WiFi и bluetooth работают как часы, логи аналогичные.

Может ты этот чип установил в слот как-нибудь плохо, так что там не все контакты подхватились?

посмотри что в dmesg пишет (особенно связанное с usb) после перезагрузки.

Lrrr ★★★★★
(27.09.25 18:17:44 MSK)

У меня близкий чип, AX200 – проблем нет. Вангую, присутствующая венда гадит исподтишка. У меня винды нет и не будет, и поведение системы будет ещё долго предсказуемым.

yars068 ★★★★★
(27.09.25 18:32:04 MSK)

Ответ на: комментарий от Lrrr 27.09.25 18:17:44 MSK

Может ты этот чип установил в слот как-нибудь плохо, так что там не все контакты подхватились?

Я бы поверил в это если бы на винде тоже не работало, но там все норм.

посмотри что в dmesg пишет (особенно связанное с usb) после перезагрузки.

sudo dmesg | grep usb                        
[    0.316514] usbcore: registered new interface driver usbfs
[    0.316514] usbcore: registered new interface driver hub
[    0.316514] usbcore: registered new device driver usb
[    0.594906] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.16
[    0.594910] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.594912] usb usb1: Product: xHCI Host Controller
[    0.594914] usb usb1: Manufacturer: Linux 6.16.8-1-MANJARO xhci-hcd
[    0.594916] usb usb1: SerialNumber: 0000:04:00.3
[    0.595391] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.595412] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.16
[    0.595414] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.595416] usb usb2: Product: xHCI Host Controller
[    0.595417] usb usb2: Manufacturer: Linux 6.16.8-1-MANJARO xhci-hcd
[    0.595419] usb usb2: SerialNumber: 0000:04:00.3
[    0.596235] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.16
[    0.596238] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.596240] usb usb3: Product: xHCI Host Controller
[    0.596241] usb usb3: Manufacturer: Linux 6.16.8-1-MANJARO xhci-hcd
[    0.596243] usb usb3: SerialNumber: 0000:04:00.4
[    0.596654] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.596675] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.16
[    0.596677] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.596679] usb usb4: Product: xHCI Host Controller
[    0.596680] usb usb4: Manufacturer: Linux 6.16.8-1-MANJARO xhci-hcd
[    0.596682] usb usb4: SerialNumber: 0000:04:00.4
[    0.597010] usbcore: registered new interface driver usbserial_generic
[    0.597016] usbserial: USB Serial support registered for generic
[    0.610812] usbcore: registered new interface driver usbhid
[    0.610814] usbhid: USB HID core driver
[    0.829494] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[    0.957215] usb 1-2: New USB device found, idVendor=1c7a, idProduct=0587, bcdDevice=64.67
[    0.957235] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    0.957241] usb 1-2: Product: ETU905A88-E
[    0.957246] usb 1-2: Manufacturer: EGIS
[    0.957251] usb 1-2: SerialNumber: 0D3F1DPMC512
[    1.074524] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[    1.212193] usb 1-3: New USB device found, idVendor=3277, idProduct=0010, bcdDevice= 0.03
[    1.212208] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    1.212214] usb 1-3: Product: USB2.0 FHD UVC WebCam
[    1.212219] usb 1-3: Manufacturer: Sonix Technology Co., Ltd.
[    7.162716] usb 1-3: Found UVC 1.00 device USB2.0 FHD UVC WebCam (3277:0010)
[    7.178441] usbcore: registered new interface driver uvcvideo
[   14.255021] usb 1-2: reset high-speed USB device number 2 using xhci_hcd
[   18.891207] usb 1-2: reset high-speed USB device number 2 using xhci_hcd
[  201.063411] usb 1-2: reset high-speed USB device number 2 using xhci_hcd
[  201.331287] usb 1-2: reset high-speed USB device number 2 using xhci_hcd

sudo dmesg | grep failed                
[    0.316054] platform USBC000:00: failed to claim resource 0: [mem 0xbc2ea704-0xbc2eb703]
[    0.316058] acpi USBC000:00: platform device creation failed: -16

andrsoin06
(27.09.25 18:40:36 MSK) автор топика

Ответ на: комментарий от yars068 27.09.25 18:32:04 MSK

ДУмаешь если ее снести это может помочь?

andrsoin06
(27.09.25 18:42:19 MSK) автор топика

Ответ на: комментарий от R_He_Po6oT 27.09.25 17:19:24 MSK

/sys/module/iwlwifi/parameters/11n_disable
0
/sys/module/iwlwifi/parameters/power_save
N
/sys/module/iwlwifi/parameters/swcrypto
0
/sys/module/iwlwifi/parameters/power_level
0
/sys/module/iwlwifi/parameters/amsdu_size
0
/sys/module/iwlwifi/parameters/uapsd_disable
3
/sys/module/iwlwifi/parameters/fw_restart
Y
/sys/module/iwlwifi/parameters/disable_11be
N
/sys/module/iwlwifi/parameters/led_mode
0
/sys/module/iwlwifi/parameters/disable_11ax
N
/sys/module/iwlwifi/parameters/enable_ini
16
/sys/module/iwlwifi/parameters/disable_11ac
N
/sys/module/iwlwifi/parameters/debug
0
/sys/module/iwlwifi/parameters/bt_coex_active
Y
/sys/module/iwlwifi/parameters/remove_when_gone
N
/sys/module/iwlwifi/parameters/nvm_file
(null)

andrsoin06
(27.09.25 18:47:46 MSK) автор топика

Ответ на: комментарий от andrsoin06 27.09.25 18:47:46 MSK

пакеты с фирмварями стоят?

R_He_Po6oT ★★★★★
(27.09.25 18:55:11 MSK)

Ответ на: комментарий от R_He_Po6oT 27.09.25 18:55:11 MSK

Linux_firmware стоит, че еще там должно быть хз

andrsoin06
(27.09.25 18:55:47 MSK) автор топика

Ответ на: комментарий от andrsoin06 27.09.25 18:55:47 MSK

Ты ставил со свободными дровами? Не знаю как так получилось, что остальных у тебя нет. В репах есть и для медиатека (который, видимо, поэтому плохо работал у тебя) и для интела. Два варианта: Открой Manjaro Settings Manager и там Оборудование. Попробуй автоматически дрова установить. Если не поможет, то через Pamac поставь пакеты фирмвари интела и медиатека.

R_He_Po6oT ★★★★★
(27.09.25 19:11:07 MSK)

Ответ на: комментарий от R_He_Po6oT 27.09.25 19:11:07 MSK

Ставил год назад уже не помню. Что-то еще должно быть?

pacman -Q | grep firmware                                        ✔ 
aic94xx-firmware 30-10
alsa-firmware 1.2.4-4
ast-firmware 501-1
gnome-firmware 47.0-2
linux-firmware-amdgpu 20250917-1
linux-firmware-atheros 20250917-1
linux-firmware-broadcom 20250917-1
linux-firmware-cirrus 20250917-1
linux-firmware-intel 20250917-1
linux-firmware-mediatek 20250917-2
linux-firmware-meta 20250917-1
linux-firmware-nvidia 20250917-1
linux-firmware-other 20250917-1
linux-firmware-qlogic 20250917-1
linux-firmware-radeon 20250917-1
linux-firmware-realtek 20250917-1
linux-firmware-whence 20250917-1
qemu-system-x86-firmware 10.1.0-1
sof-firmware 2025.05.1-1
wd719x-firmware 1-7

andrsoin06
(27.09.25 19:21:32 MSK) автор топика

Ответ на: комментарий от andrsoin06 27.09.25 19:21:32 MSK

Если всё это стоит и всё равно не работает ни с медиатеком ни с интелом, то проблемы глубже. Просто не знаю. Я настолько привык, что всё работает, что всё уже и позабыл. Или подожди тех кто поумнее, или на манджаровский или арчевский форум неси проблему.

Хм. а какое ядро загружается? Не старое какое? А то бывает, что по несколько ядер и сам забыл на чём работаешь.

И проверь опции загрузки. Может когда-то опции прописывал?

R_He_Po6oT ★★★★★
(27.09.25 19:30:53 MSK)

Ответ на: комментарий от R_He_Po6oT 27.09.25 19:30:53 MSK

Загрузку не трогал, грузится 6.16

andrsoin06
(27.09.25 19:34:10 MSK) автор топика

Ответ на: комментарий от andrsoin06 27.09.25 19:34:10 MSK

Смотри в dmesg

R_He_Po6oT ★★★★★
(27.09.25 19:40:22 MSK)

Синезуб зависит от iwlwifi и не может зарегистрироваться раньше. С начало нужно убедится в том что iwlwifi должным образом работает, а не просто обнаруживается. Скорее всего будет btusb, не btintel.

ext4
(27.09.25 20:15:10 MSK)

Ответ на: комментарий от ext4 27.09.25 20:15:10 MSK

То что он зависит это понятно, а вот дальше поподробнее

andrsoin06
(27.09.25 20:22:53 MSK) автор топика

Ответ на: комментарий от andrsoin06 27.09.25 20:22:53 MSK

ext4
(27.09.25 20:36:46 MSK)
Последнее исправление: ext4 27.09.25 20:40:05 MSK (всего исправлений: 2)

Ответ на: комментарий от ext4 27.09.25 20:36:46 MSK

ам чет очень много, поэтому на pastebin кинул https://pastebin.com/876jWAx0

andrsoin06
(27.09.25 21:03:41 MSK) автор топика

Ответ на: комментарий от andrsoin06 27.09.25 21:03:41 MSK

У тебя там нет ни одного упоминания Bluetooth, а должно быть как минимум Bluetooth: Core ver 2.22 даже если нет устройства, как будто из ядра выпилили блютус, попробуй подгрузить модуль modprobe bluetooth и проверить systemctl status bluetooth и rfkill

ext4
(27.09.25 21:23:34 MSK)
Последнее исправление: ext4 27.09.25 21:25:38 MSK (всего исправлений: 2)

Ответ на: комментарий от ext4 27.09.25 21:23:34 MSK

systemctl status bluetooth                                                                                                                                                                                                                    
○ bluetooth.service - Bluetooth service
     Loaded: loaded (/usr/lib/systemd/system/bluetooth.service; enabled; preset: disabled)
     Active: inactive (dead)
       Docs: man:bluetoothd(8)

сен 27 19:16:13 andrey-zenbookum3402yarum3402ya systemd[1]: Bluetooth service was skipped because of an unmet condition check (ConditionPathIsDirectory=/sys/class/bluetooth).
сен 27 19:22:37 andrey-zenbookum3402yarum3402ya systemd[1]: Bluetooth service was skipped because of an unmet condition check (ConditionPathIsDirectory=/sys/class/bluetooth).

rfkill list                                                                                                                                                                                                                                   
0: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no

andrsoin06
(27.09.25 21:30:57 MSK) автор топика

Ответ на: комментарий от andrsoin06 27.09.25 21:30:57 MSK

Модуль подгрузил? Проверь lsmod и в dmesg должна появится запись тоже.

ext4
(27.09.25 21:36:35 MSK)

Ответ на: комментарий от ext4 27.09.25 21:36:35 MSK

lsmod | grep blue                                                                                                                                                                                                                         
bluetooth            1110016  0
rfkill                 45056  9 iwlmvm,asus_wmi,bluetooth,cfg80211

sudo dmesg | grep Bluetooth                                                                                                                                                                                                               
[ 8067.362044] Bluetooth: Core ver 2.22
[ 8067.362127] Bluetooth: HCI device and connection manager initialized
[ 8067.362137] Bluetooth: HCI socket layer initialized
[ 8067.362158] Bluetooth: L2CAP socket layer initialized
[ 8067.362169] Bluetooth: SCO socket layer initialized

andrsoin06
(27.09.25 22:21:05 MSK) автор топика

Ответ на: комментарий от andrsoin06 27.09.25 22:21:05 MSK

В systemctl и rfkill тоже самое

andrsoin06
(27.09.25 22:26:09 MSK) автор топика

Ответ на: комментарий от andrsoin06 27.09.25 18:42:19 MSK

Не, снос может так повлиять, что сам не рад будешь, но вот мешать она вполне себе может: 1 и 2.

yars068 ★★★★★
(27.09.25 22:36:46 MSK)
Последнее исправление: yars068 27.09.25 22:46:51 MSK (всего исправлений: 1)

Ответ на: комментарий от andrsoin06 27.09.25 21:30:57 MSK

/sys/class/bluetooth

Проверь, что у тебя ничего касательно Bluetooth не заблокировано в /etc/modprobe.d/*.

yars068 ★★★★★
(27.09.25 22:38:43 MSK)

Ответ на: комментарий от yars068 27.09.25 22:38:43 MSK

Если я правильно понял, то нет ничего связанного с bt

/etc/modprobe.d/wifi.conf
options mt7921e disable_aspm=1
/etc/modprobe.d/mlx4.conf
# This file is intended for users to select the various module options
# they need for the mlx4 driver.  On upgrade of the rdma package,
# any user made changes to this file are preserved.  Any changes made
# to the libmlx4.conf file in this directory are overwritten on
# pacakge upgrade.
#
# Some sample options and what they would do
# Enable debugging output, device managed flow control, and disable SRIOV
#options mlx4_core debug_level=1 log_num_mgm_entry_size=-1 probe_vf=0 num_vfs=0
#
# Enable debugging output and create SRIOV devices, but don't attach any of
# the child devices to the host, only the parent device
#options mlx4_core debug_level=1 probe_vf=0 num_vfs=7
#
# Enable debugging output, SRIOV, and attach one of the SRIOV child devices
# in addition to the parent device to the host
#options mlx4_core debug_level=1 probe_vf=1 num_vfs=7
#
# Enable per priority flow control for send and receive, setting both priority
# 1 and 2 as no drop priorities
#options mlx4_en pfctx=3 pfcrx=3
/etc/modprobe.d/blacklist-input-wacom-dkms.conf
blacklist wacom
blacklist wacom_w8001


/etc/modprobe.d/iwlwifi.conf
/etc/modprobe.d/truescale.conf
install ib_qib modprobe -i ib_qib $CMDLINE_OPTS && /usr/lib/rdma/truescale-serdes.cmds start

andrsoin06
(27.09.25 22:41:58 MSK) автор топика

Ответ на: комментарий от andrsoin06 27.09.25 22:21:05 MSK

У тебя не подгружаются модули автоматически, bluetooth должен был подгрузить так же btusb, btintel и прочие, но не сделал. Попробуй подгрузить их тоже вручную modprobe btusb btintel. В dmesg должно быть что-то вроде usbcore: registered new interface driver btusb и Bluetooth: hci0: если всё хорошо.

ext4
(27.09.25 22:42:40 MSK)

Ответ на: комментарий от andrsoin06 27.09.25 22:41:58 MSK

/etc/modprobe.d/wifi.conf

Там проверь, карта же Wi-Fi + Bluetooth.

yars068 ★★★★★
(27.09.25 22:44:33 MSK)

Ответ на: комментарий от andrsoin06 27.09.25 22:41:58 MSK

install ib_qib modprobe -i ib_qib $CMDLINE_OPTS && /usr/lib/rdma/truescale-serdes.cmds start

А это вообще какая-то ересь.

yars068 ★★★★★
(27.09.25 22:45:11 MSK)

Ответ на: комментарий от yars068 27.09.25 22:44:33 MSK

Там настройка ток для старой карты и все

andrsoin06
(27.09.25 22:53:26 MSK) автор топика

Ответ на: комментарий от ext4 27.09.25 22:42:40 MSK

[  136.284578] bluetooth: unknown parameter 'btusb' ignored
[  136.284588] bluetooth: unknown parameter 'btintel' ignored
[  136.284863] Bluetooth: Core ver 2.22
[  136.284933] NET: Registered PF_BLUETOOTH protocol family
[  136.284937] Bluetooth: HCI device and connection manager initialized
[  136.284946] Bluetooth: HCI socket layer initialized
[  136.284953] Bluetooth: L2CAP socket layer initialized
[  136.284962] Bluetooth: SCO socket layer initialized
[  228.076956] btusb: unknown parameter 'btintel' ignored
[  228.077181] usbcore: registered new interface driver btusb

Запускал команду два раза ну и вот что получил

andrsoin06
(27.09.25 22:58:07 MSK) автор топика

Ответ на: комментарий от andrsoin06 27.09.25 22:58:07 MSK

modprobe btusb; modprobe btintel

ext4
(27.09.25 23:02:30 MSK)

Ответ на: комментарий от andrsoin06 27.09.25 22:58:07 MSK

Комп можно было не перезапускать

ext4
(27.09.25 23:03:24 MSK)

Ответ на: комментарий от ext4 27.09.25 23:02:30 MSK

[  228.076956] btusb: unknown parameter 'btintel' ignored
[  228.077181] usbcore: registered new interface driver btusb
[ 1458.140374] usb 1-2: reset high-speed USB device number 2 using xhci_hcd
[ 1458.408394] usb 1-2: reset high-speed USB device number 2 using xhci_hcd

andrsoin06
(27.09.25 23:18:23 MSK) автор топика

Ответ на: комментарий от andrsoin06 27.09.25 23:18:23 MSK

Если после usbcore: registered new interface driver btusb нет hci0, то я не знаю, возможно на слоте нет usb разводки, a у mtk использовалась своя шина для бт поверх pci, или вендор по белому списку проверяет, можно попробовать в биосе посмотреть иногда там есть инфа о бт, хз.

ext4
(27.09.25 23:28:19 MSK)
Последнее исправление: ext4 27.09.25 23:33:31 MSK (всего исправлений: 2)

У mtk бт висел на usb?

ext4
(27.09.25 23:31:12 MSK)

Ответ на: комментарий от ext4 27.09.25 23:31:12 MSK

честно говоря даже не знаю, он из коробки работал, я этим вопросом даже не задавался

andrsoin06
(27.09.25 23:34:35 MSK) автор топика

Ответ на: комментарий от andrsoin06 27.09.25 23:34:35 MSK

В виндре работает же.

ext4
(27.09.25 23:38:36 MSK)

Ответ на: комментарий от ext4 27.09.25 23:38:36 MSK

да

andrsoin06
(27.09.25 23:39:47 MSK) автор топика

←	HDD редко издает тихие странные звуки

Linux-hardware

Похожие темы