Исправление mvt, (текущая версия) :
Ну, тут, как бы как есть, сейчас всё работает на матери EP-4PDA3I-3, что, в общем, ничего не меняет.
Между двумя машинами организован OpenVPN тоннель, а там всё равно больше 100 Mbit/s не будет, +-:
mvt@mvt-server-2:~$ iperf3 -c 10.8.0.1 Connecting to host 10.8.0.1, port 5201 [ 4] local 10.8.0.3 port 35256 connected to 10.8.0.1 port 5201 [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.00 sec 13.7 MBytes 114 Mbits/sec 0 626 KBytes
[ 4] 1.00-2.00 sec 12.6 MBytes 105 Mbits/sec 327 543 KBytes
[ 4] 2.00-3.00 sec 12.2 MBytes 102 Mbits/sec 0 602 KBytes
[ 4] 3.00-4.00 sec 12.4 MBytes 104 Mbits/sec 0 644 KBytes
[ 4] 4.00-5.00 sec 12.3 MBytes 103 Mbits/sec 1 478 KBytes
[ 4] 5.00-6.00 sec 12.3 MBytes 103 Mbits/sec 0 517 KBytes
[ 4] 6.00-7.00 sec 12.4 MBytes 104 Mbits/sec 0 542 KBytes
[ 4] 7.00-8.00 sec 12.4 MBytes 104 Mbits/sec 0 555 KBytes
[ 4] 8.00-9.00 sec 12.4 MBytes 104 Mbits/sec 0 560 KBytes
[ 4] 9.00-10.00 sec 12.3 MBytes 103 Mbits/sec 0 561 KBytes
[ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.00 sec 125 MBytes 105 Mbits/sec 328 sender [ 4] 0.00-10.00 sec 123 MBytes 103 Mbits/sec receiver
Обратное направление:
mvt@mvt-server-2:~$ iperf3 -c 10.8.0.1 -R Connecting to host 10.8.0.1, port 5201 Reverse mode, remote host 10.8.0.1 is sending [ 4] local 10.8.0.3 port 35260 connected to 10.8.0.1 port 5201 [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.00 sec 8.73 MBytes 73.2 Mbits/sec
[ 4] 1.00-2.00 sec 8.51 MBytes 71.4 Mbits/sec
[ 4] 2.00-3.00 sec 8.62 MBytes 72.3 Mbits/sec
[ 4] 3.00-4.00 sec 8.68 MBytes 72.8 Mbits/sec
[ 4] 4.00-5.00 sec 8.71 MBytes 73.0 Mbits/sec
[ 4] 5.00-6.00 sec 8.70 MBytes 73.0 Mbits/sec
[ 4] 6.00-7.00 sec 8.45 MBytes 70.8 Mbits/sec
[ 4] 7.00-8.00 sec 8.59 MBytes 72.0 Mbits/sec
[ 4] 8.00-9.00 sec 8.84 MBytes 74.2 Mbits/sec
[ 4] 9.00-10.00 sec 8.60 MBytes 72.1 Mbits/sec
[ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.00 sec 86.8 MBytes 72.8 Mbits/sec 57 sender [ 4] 0.00-10.00 sec 86.5 MBytes 72.6 Mbits/sec receiver
iperf Done.
Исходная версия mvt, :
Ну, тут, как бы как есть, сейчас всё работает на матери EP-4PDA3I-3, что в общем ничего не меняет.
Между двумя машинами организован OpenVPN тоннель, а там всё равно больше 100 mbit/s не будет, +-:
mvt@mvt-server-2:~$ iperf3 -c 10.8.0.1 Connecting to host 10.8.0.1, port 5201 [ 4] local 10.8.0.3 port 35256 connected to 10.8.0.1 port 5201 [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.00 sec 13.7 MBytes 114 Mbits/sec 0 626 KBytes
[ 4] 1.00-2.00 sec 12.6 MBytes 105 Mbits/sec 327 543 KBytes
[ 4] 2.00-3.00 sec 12.2 MBytes 102 Mbits/sec 0 602 KBytes
[ 4] 3.00-4.00 sec 12.4 MBytes 104 Mbits/sec 0 644 KBytes
[ 4] 4.00-5.00 sec 12.3 MBytes 103 Mbits/sec 1 478 KBytes
[ 4] 5.00-6.00 sec 12.3 MBytes 103 Mbits/sec 0 517 KBytes
[ 4] 6.00-7.00 sec 12.4 MBytes 104 Mbits/sec 0 542 KBytes
[ 4] 7.00-8.00 sec 12.4 MBytes 104 Mbits/sec 0 555 KBytes
[ 4] 8.00-9.00 sec 12.4 MBytes 104 Mbits/sec 0 560 KBytes
[ 4] 9.00-10.00 sec 12.3 MBytes 103 Mbits/sec 0 561 KBytes
[ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.00 sec 125 MBytes 105 Mbits/sec 328 sender [ 4] 0.00-10.00 sec 123 MBytes 103 Mbits/sec receiver
Обратное направление:
mvt@mvt-server-2:~$ iperf3 -c 10.8.0.1 -R Connecting to host 10.8.0.1, port 5201 Reverse mode, remote host 10.8.0.1 is sending [ 4] local 10.8.0.3 port 35260 connected to 10.8.0.1 port 5201 [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.00 sec 8.73 MBytes 73.2 Mbits/sec
[ 4] 1.00-2.00 sec 8.51 MBytes 71.4 Mbits/sec
[ 4] 2.00-3.00 sec 8.62 MBytes 72.3 Mbits/sec
[ 4] 3.00-4.00 sec 8.68 MBytes 72.8 Mbits/sec
[ 4] 4.00-5.00 sec 8.71 MBytes 73.0 Mbits/sec
[ 4] 5.00-6.00 sec 8.70 MBytes 73.0 Mbits/sec
[ 4] 6.00-7.00 sec 8.45 MBytes 70.8 Mbits/sec
[ 4] 7.00-8.00 sec 8.59 MBytes 72.0 Mbits/sec
[ 4] 8.00-9.00 sec 8.84 MBytes 74.2 Mbits/sec
[ 4] 9.00-10.00 sec 8.60 MBytes 72.1 Mbits/sec
[ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.00 sec 86.8 MBytes 72.8 Mbits/sec 57 sender [ 4] 0.00-10.00 sec 86.5 MBytes 72.6 Mbits/sec receiver
iperf Done.