Исправление
darkenshvein,
(текущая версия)
:
А с фирмварью все нормально?
ну, например при обновлении на initramfs ругани на сетевуху не вижу.
update-initramfs: Generating /boot/initrd.img-5.6.15cutedmyver
W: Possible missing firmware /lib/firmware/amdgpu/navi12_gpu_info.bin for module amdgpu
auto_fw_reset
можно поподробнее?
modprobe qlcnic auto_fw_reset=0
оно?
sudo ethtool enp1s0f0
Settings for enp1s0f0:
Supported ports: [ TP FIBRE ]
Supported link modes: 10000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: 10000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Unknown! (255)
Port: FIBRE
PHYAD: 0
Transceiver: internal
Auto-negotiation: off
Supports Wake-on: g
Wake-on: g
Current message level: 0x00000000 (0)
Link detected: no
darkshvein@lexx9:~$ sudo ethtool enp1s0f1
Settings for enp1s0f1:
Supported ports: [ TP FIBRE ]
Supported link modes: 10000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: 10000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Unknown! (255)
Port: FIBRE
PHYAD: 1
Transceiver: internal
Auto-negotiation: off
Supports Wake-on: g
Wake-on: g
Current message level: 0x00000000 (0)
Link detected: no
Исходная версия
darkenshvein,
:
А с фирмварью все нормально?
ну, например при обновлении на initramfs ругани на сетевуху не вижу.
update-initramfs: Generating /boot/initrd.img-5.6.15cutedmyver
W: Possible missing firmware /lib/firmware/amdgpu/navi12_gpu_info.bin for module amdgpu
auto_fw_reset
можно поподробнее?
modprobe qlcnic auto_fw_reset=0
оно?
sudo ethtool enp1s0f0
Settings for enp1s0f0:
Supported ports: [ TP FIBRE ]
Supported link modes: 10000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: 10000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Unknown! (255)
Port: FIBRE
PHYAD: 0
Transceiver: internal
Auto-negotiation: off
Supports Wake-on: g
Wake-on: g
Current message level: 0x00000000 (0)
Link detected: no
darkshvein@lexx9:~$ sudo ethtool enp1s0f1
Settings for enp1s0f1:
Supported ports: [ TP FIBRE ]
Supported link modes: 10000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: 10000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Unknown! (255)
Port: FIBRE
PHYAD: 1
Transceiver: internal
Auto-negotiation: off
Supports Wake-on: g
Wake-on: g
Current message level: 0x00000000 (0)
Link detected: no