Исправление petav, (текущая версия) :
Да не уходит
ping 192.168.198.100
PING 192.168.198.100 (192.168.198.100) 56(84) bytes of data.
From 192.168.198.75 icmp_seq=1 Destination Host Unreachable
From 192.168.198.75 icmp_seq=2 Destination Host Unreachable
From 192.168.198.75 icmp_seq=3 Destination Host Unreachable
tcpdump dst 192.168.198.100
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
ip route
default via 111.111.111.111 dev eth1
111.111.0.0/24 dev eth1 proto kernel scope link src 111.111.111.111
172.16.200.0/24 via 172.16.200.2 dev tun0
172.16.200.2 dev tun0 proto kernel scope link src 172.16.200.1
192.168.1.0/24 dev eth2 proto kernel scope link src 192.168.1.25
192.168.198.0/24 dev eth5 proto kernel scope link src 192.168.198.75
192.168.199.0/24 dev eth3 proto kernel scope link src 192.168.199.75
192.168.200.0/24 dev eth0 proto kernel scope link src 192.168.200.75
192.168.206.0/24 via 192.168.206.75 dev tap0
192.168.206.75 dev tap0 scope link
Даже если уходит, разве я не должен увидеть ICMP echo request?
Исходная версия petav, :
Да не уходит
ping 192.168.198.100
PING 192.168.198.100 (192.168.198.100) 56(84) bytes of data.
From 192.168.198.75 icmp_seq=1 Destination Host Unreachable
From 192.168.198.75 icmp_seq=2 Destination Host Unreachable
From 192.168.198.75 icmp_seq=3 Destination Host Unreachable
tcpdump dst 192.168.198.100
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
ip route
default via 111.111.111.111 dev eth1
111.111.0.0/24 dev eth1 proto kernel scope link src 111.111.111.111
172.16.200.0/24 via 172.16.200.2 dev tun0
172.16.200.2 dev tun0 proto kernel scope link src 172.16.200.1
192.168.1.0/24 dev eth2 proto kernel scope link src 192.168.1.25
192.168.198.0/24 dev eth5 proto kernel scope link src 192.168.198.75
192.168.199.0/24 dev eth3 proto kernel scope link src 192.168.199.75
192.168.200.0/24 dev eth0 proto kernel scope link src 192.168.200.75
192.168.206.0/24 via 192.168.206.75 dev tap0
192.168.206.75 dev tap0 scope link