SkyStar2 и VLC и CentOS

Поподробнее. Сигнал? В логах что?

> совсем закрывается окно с картинкой ТВ

Окно на клиенте, который играет поток с сети?

Зашел в ВЛЦ, вот такое оно пишет:
[00000308] stream_out_standard private: SAP Enabled
[00000312] stream_out_standard private: SAP Enabled
[00000316] stream_out_standard private error: for now udp and rtp are only valid with TS
[00000319] mux_dummy private: Open
[00000316] stream_out_standard private: SAP Enabled
[00000321] stream_out_standard private error: for now udp and rtp are only valid with TS
[00000324] mux_dummy private: Open
[00000321] stream_out_standard private: SAP Enabled
[00000325] stream_out_standard private error: for now udp and rtp are only valid with TS
[00000328] mux_dummy private: Open
[00000325] stream_out_standard private: SAP Enabled
[00000329] stream_out_standard private error: for now udp and rtp are only valid with TS
[00000332] mux_dummy private: Open
[00000329] stream_out_standard private: SAP Enabled
libdvbpsi error (PSI decoder): TS discontinuity (received 5, expected 0) for PID 0
libdvbpsi error (PSI decoder): TS discontinuity (received 3, expected 0) for PID 277
libdvbpsi error (PSI decoder): TS discontinuity (received 3, expected 0) for PID 276
libdvbpsi error (PSI decoder): TS discontinuity (received 3, expected 0) for PID 275
libdvbpsi error (PSI decoder): TS discontinuity (received 3, expected 0) for PID 274
libdvbpsi error (PSI decoder): TS discontinuity (received 3, expected 0) for PID 273
libdvbpsi error (PSI decoder): TS discontinuity (received 3, expected 0) for PID 272
libdvbpsi error (PSI decoder): TS discontinuity (received 3, expected 0) for PID 271
libdvbpsi error (PSI decoder): TS discontinuity (received 3, expected 0) for PID 270
libdvbpsi error (PSI decoder): TS discontinuity (received 3, expected 0) for PID 269
libdvbpsi error (PSI decoder): TS discontinuity (received 3, expected 0) for PID 295
libdvbpsi error (PSI decoder): TS discontinuity (received 3, expected 0) for PID 290
libdvbpsi error (PSI decoder): TS discontinuity (received 3, expected 0) for PID 289
libdvbpsi error (PSI decoder): TS discontinuity (received 4, expected 0) for PID 279
libdvbpsi error (PSI decoder): TS discontinuity (received 4, expected 0) for PID 278
[00000407] main packetizer error: cannot create packetizer output (telx)
[00000415] main packetizer error: cannot create packetizer output (telx)
[00000406] main packetizer error: cannot create packetizer output (mpga)
[00000399] main packetizer error: cannot create packetizer output (mpga)
libdvbpsi error (PSI decoder): TS discontinuity (received 11, expected 0) for PID 17

Да закрывается на клиенте. Если его перезапустить то можно смотреть дальше.

Может ли быть причина глюков в том что в отличае от первых дней эксплуатации (когда все было норм) уровень сигнала снизился и стал вот такой:
status 1f | signal  82% | snr  70% | ber 7 | unc 0 | FE_HAS_LOCK
status 1f | signal  82% | snr  70% | ber 0 | unc 0 | FE_HAS_LOCK
status 1f | signal  82% | snr  70% | ber 4 | unc 0 | FE_HAS_LOCK
status 1f | signal  82% | snr  70% | ber 0 | unc 0 | FE_HAS_LOCK
status 1f | signal  82% | snr  70% | ber 8 | unc 0 | FE_HAS_LOCK
status 1f | signal  82% | snr  70% | ber 6 | unc 0 | FE_HAS_LOCK
status 1f | signal  82% | snr  70% | ber 0 | unc 0 | FE_HAS_LOCK
status 1f | signal  82% | snr  70% | ber 7 | unc 0 | FE_HAS_LOCK
status 1f | signal  82% | snr  70% | ber 0 | unc 0 | FE_HAS_LOCK
status 1f | signal  82% | snr  70% | ber 0 | unc 0 | FE_HAS_LOCK

До этого бер по нулям было.