LINUX.ORG.RU
решено Форум — Linux-hardware  

Xerox Phaser 3010 не печатает

 , ,


0

1

ОС Дебиан testing RC2 amd64. Этот же принтер печатал в более старой версии Дебиан. После установки новой - отказывается. Согласно распространённой инструкции, скачал драйвер с сайта xerox и сделал следующее:

apt-get install libcups2:i386 libcupsfilters1:i386 libcupsimage2:i386

dpkg -i xerox-phaser-3010-3040_1.0-28_i386.deb


Ошибка: Остановлено «/usr/lib/xrhr3acl.so: cannot open shared object file: No such file or directory»

И действительно, xrhr3acl.so отсутствует в /usr/lib. Вместо этого, драйвер установил туда файл xrhr1acl.so. единица вместо тройки.



Последнее исправление: Lesjar (всего исправлений: 2)
← PCI Passthrough + LinuxMint 20 + KVM
60hz на 144hz мониторе →

/var/log/cups/error_log

part 1

D [07/Jul/2021:08:18:33 +0300] [Job 9] GPL Ghostscript 9.53.3: Unrecoverable error, exit code 1
D [07/Jul/2021:08:18:33 +0300] [Job 9] Rendering completed
D [07/Jul/2021:08:18:33 +0300] [Job 9] PID 5797 (/usr/lib/cups/filter/gstoraster) stopped with status 1.
D [07/Jul/2021:08:18:33 +0300] [Job 9] Hint: Try setting the LogLevel to "debug" to find out more.
D [07/Jul/2021:08:18:33 +0300] [Job 9] Read thread still active, aborting the pending read...
D [07/Jul/2021:08:18:33 +0300] [Job 9] PID 5799 (/usr/lib/cups/backend/usb) exited with no errors.
D [07/Jul/2021:08:18:33 +0300] [Job 9] End of messages
D [07/Jul/2021:08:18:33 +0300] [Job 9] printer-state=3(idle)
D [07/Jul/2021:08:18:33 +0300] [Job 9] printer-state-message="Rendering completed"
D [07/Jul/2021:08:18:33 +0300] [Job 9] printer-state-reasons=none
E [07/Jul/2021:08:18:39 +0300] [Job 10] /usr/lib/xrhr3acl.so: cannot open shared object file: No such file or directory
E [07/Jul/2021:08:18:40 +0300] [Job 10] Unable to open raster stream - : Broken pipe
E [07/Jul/2021:08:18:47 +0300] [Job 10] Job stopped due to filter errors; please consult the /var/log/cups/error_log file for details.
D [07/Jul/2021:08:18:47 +0300] [Job 10] The following messages were recorded from 08:18:39 to 08:18:47
D [07/Jul/2021:08:18:47 +0300] [Job 10] Applying default options...
D [07/Jul/2021:08:18:47 +0300] [Job 10] Adding start banner page "none".
D [07/Jul/2021:08:18:47 +0300] [Job 10] Adding end banner page "none".
D [07/Jul/2021:08:18:47 +0300] [Job 10] File of type application/pdf queued by "...".
D [07/Jul/2021:08:18:47 +0300] [Job 10] hold_until=0
D [07/Jul/2021:08:18:47 +0300] [Job 10] Queued on "3040" by "...".
D [07/Jul/2021:08:18:47 +0300] [Job 10] time-at-processing=1625635119
D [07/Jul/2021:08:18:47 +0300] [Job 10] 3 filters for job:
D [07/Jul/2021:08:18:47 +0300] [Job 10] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [07/Jul/2021:08:18:47 +0300] [Job 10] gstoraster (application/vnd.cups-pdf to application/vnd.cups-raster, cost 99)
D [07/Jul/2021:08:18:47 +0300] [Job 10] xrhr2ap (application/vnd.cups-raster to printer/3040, cost 0)
D [07/Jul/2021:08:18:47 +0300] [Job 10] job-sheets=none,none
D [07/Jul/2021:08:18:47 +0300] [Job 10] argv[0]="3040"
D [07/Jul/2021:08:18:47 +0300] [Job 10] argv[1]="10"
D [07/Jul/2021:08:18:47 +0300] [Job 10] argv[2]="..."
D [07/Jul/2021:08:18:47 +0300] [Job 10] argv[3]="3040 - CUPS 2.3.3op2"
D [07/Jul/2021:08:18:47 +0300] [Job 10] argv[4]="1"
D [07/Jul/2021:08:18:47 +0300] [Job 10] argv[5]="noXRSaveBlankSheet XRColorDensityBlackMid=0 Resolution=600dpi PageSize=A4 noTonerMode noCollate MediaType=Plain XRColorDensityBlackHigh=0 noImageEnh noImageRotation XRColorDensityBlackLow=0 number-up=1 job-uuid=urn:uuid:89699d80-d59e-3c22-7181-2d1a97125669 job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1625635119 time-at-processing=1625635119"
D [07/Jul/2021:08:18:47 +0300] [Job 10] argv[6]="/var/spool/cups/d00010-001"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc-root"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[7]="CUPS_STATEDIR=/run/cups"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[8]="HOME=/var/spool/cups/tmp"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[10]="SERVER_ADMIN=root@dom"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[11]="SOFTWARE=CUPS/2.3.3op2"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[13]="USER=root"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[14]="CUPS_MAX_MESSAGE=2047"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[15]="CUPS_SERVER=/run/cups/cups.sock"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[17]="IPP_PORT=631"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[18]="CHARSET=utf-8"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[19]="LANG=ru_RU.UTF-8"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[20]="PPD=/etc/cups/ppd/3040.ppd"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[21]="RIP_MAX_CACHE=128m"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[22]="CONTENT_TYPE=application/pdf"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[23]="DEVICE_URI=usb://Xerox/Phaser%203010?serial=3196736246"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[24]="PRINTER_INFO=3040"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[25]="PRINTER_LOCATION="
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[26]="PRINTER=3040"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[27]="PRINTER_STATE_REASONS=none"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[28]="CUPS_FILETYPE=document"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[29]="FINAL_CONTENT_TYPE=application/vnd.cups-raster"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[30]="AUTH_I****"
D [07/Jul/2021:08:18:47 +0300] [Job 10] Started filter /usr/lib/cups/filter/pdftopdf (PID 5840)
D [07/Jul/2021:08:18:47 +0300] [Job 10] Started filter /usr/lib/cups/filter/gstoraster (PID 5841)
D [07/Jul/2021:08:18:47 +0300] [Job 10] Started filter /usr/lib/cups/filter/xrhr2ap (PID 5842)
D [07/Jul/2021:08:18:47 +0300] [Job 10] Started backend /usr/lib/cups/backend/usb (PID 5843)
D [07/Jul/2021:08:18:47 +0300] [Job 10] OUTFORMAT=\"<none>\", so output format will be CUPS/PWG Raster
D [07/Jul/2021:08:18:47 +0300] [Job 10] pdftopdf: Last filter determined by the PPD: xrhr2ap; FINAL_CONTENT_TYPE: application/vnd.cups-raster => pdftopdf will not log pages in page_log.
D [07/Jul/2021:08:18:47 +0300] [Job 10] PDF interactive form and annotation flattening done via QPDF
D [07/Jul/2021:08:18:47 +0300] [Job 10] Loading USB quirks from \"/usr/share/cups/usb\".
D [07/Jul/2021:08:18:47 +0300] [Job 10] Loaded 98 quirks.
D [07/Jul/2021:08:18:47 +0300] [Job 10] Printing on printer with URI: usb://Xerox/Phaser%203010?serial=3196736246
D [07/Jul/2021:08:18:47 +0300] [Job 10] libusb_get_device_list=11
Lesjar
() автор топика
Ответ на: комментарий от Lesjar

/var/log/cups/error_log

part 2

D [07/Jul/2021:08:18:47 +0300] [Job 10] STATE: +connecting-to-device
D [07/Jul/2021:08:18:47 +0300] [Job 10] STATE: -connecting-to-device
D [07/Jul/2021:08:18:47 +0300] [Job 10] InitDllInterface()...
D [07/Jul/2021:08:18:47 +0300] [Job 10] Set job-printer-state-message to "/usr/lib/xrhr3acl.so: cannot open shared object file: No such file or directory", current level=ERROR
D [07/Jul/2021:08:18:47 +0300] [Job 10] PID 5840 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [07/Jul/2021:08:18:47 +0300] [Job 10] PID 5842 (/usr/lib/cups/filter/xrhr2ap) stopped with status 1.
D [07/Jul/2021:08:18:47 +0300] [Job 10] Hint: Try setting the LogLevel to "debug" to find out more.
D [07/Jul/2021:08:18:47 +0300] [Job 10] Printer found with device ID: MFG:Xerox;CMD:HBPL;MDL:Phaser 3010;CLS:Printer;DES:Xerox Phaser 3010;STS:JwAAAAAAAAAAAgAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA; Device URI: usb://Xerox/Phaser%203010?serial=3196736246
D [07/Jul/2021:08:18:47 +0300] [Job 10] Device protocol: 2
D [07/Jul/2021:08:18:47 +0300] [Job 10] Printer does not like usblp kernel module to be re-attached after job
D [07/Jul/2021:08:18:47 +0300] [Job 10] Отправка данных на принтер.
D [07/Jul/2021:08:18:47 +0300] [Job 10] Sent 0 bytes...
D [07/Jul/2021:08:18:47 +0300] [Job 10] Waiting for read thread to exit...
D [07/Jul/2021:08:18:47 +0300] [Job 10] Color Manager: Calibration Mode/Off
D [07/Jul/2021:08:18:47 +0300] [Job 10] Calling FindDeviceById(cups-3040)
D [07/Jul/2021:08:18:47 +0300] [Job 10] Found device /org/freedesktop/ColorManager/devices/cups_3040
D [07/Jul/2021:08:18:47 +0300] [Job 10] Calling org.freedesktop.ColorManager.Device.Get(ProfilingInhibitors)
D [07/Jul/2021:08:18:47 +0300] [Job 10] Calling FindDeviceById(cups-3040)
D [07/Jul/2021:08:18:47 +0300] [Job 10] Found device /org/freedesktop/ColorManager/devices/cups_3040
D [07/Jul/2021:08:18:47 +0300] [Job 10] Calling GetProfileForQualifiers(Gray.Plain.600dpi...)
D [07/Jul/2021:08:18:47 +0300] [Job 10] Failed to send: org.freedesktop.ColorManager.Device.NothingMatched:nothing matched expression \'Gray.Plain.600dpi,Gray.Plain.*,Gray.*.600dpi,Gray.*.*,*\'
D [07/Jul/2021:08:18:47 +0300] [Job 10] Failed to get profile filename for cups-3040
D [07/Jul/2021:08:18:47 +0300] [Job 10] Color Manager: no profiles specified in PPD
D [07/Jul/2021:08:18:47 +0300] [Job 10] Color Manager: ICC Profile: None
D [07/Jul/2021:08:18:47 +0300] [Job 10] Ghostscript using Any-Part-of-Pixel method to fill paths.
D [07/Jul/2021:08:18:47 +0300] [Job 10] Ghostscript command line: gs -dQUIET -dSAFER -dNOPAUSE -dBATCH -dNOINTERPOLATE -dNOMEDIAATTRS -dShowAcroForm -sstdout=%stderr -sOutputFile=%stdout -sDEVICE=cups -sMediaType=Plain -r600x600 -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -dcupsBitsPerColor=8 -dcupsColorOrder=0 -dcupsColorSpace=0 -scupsPageSizeName=A4 -I/usr/share/cups/fonts -c \'<</.HWMargins[11.620000 11.620000 11.619995 11.619995] /Margins[0 0]>>setpagedevice\' -f -_
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[0]=\"CUPS_CACHEDIR=/var/cache/cups\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[1]=\"CUPS_DATADIR=/usr/share/cups\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[2]=\"CUPS_DOCROOT=/usr/share/cups/doc-root\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[3]=\"CUPS_FONTPATH=/usr/share/cups/fonts\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[4]=\"CUPS_REQUESTROOT=/var/spool/cups\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[5]=\"CUPS_SERVERBIN=/usr/lib/cups\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[6]=\"CUPS_SERVERROOT=/etc/cups\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[7]=\"CUPS_STATEDIR=/run/cups\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[8]=\"HOME=/var/spool/cups/tmp\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[9]=\"PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[10]=\"SERVER_ADMIN=root@dom\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[11]=\"SOFTWARE=CUPS/2.3.3op2\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[12]=\"USER=root\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[13]=\"CUPS_MAX_MESSAGE=2047\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[14]=\"CUPS_SERVER=/run/cups/cups.sock\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[15]=\"CUPS_ENCRYPTION=IfRequested\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[16]=\"IPP_PORT=631\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[17]=\"CHARSET=utf-8\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[18]=\"LANG=ru_RU.UTF-8\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[19]=\"PPD=/etc/cups/ppd/3040.ppd\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[20]=\"RIP_MAX_CACHE=128m\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[21]=\"CONTENT_TYPE=application/pdf\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[22]=\"DEVICE_URI=usb://Xerox/Phaser%203010?serial=3196736246\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[23]=\"PRINTER_INFO=3040\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[24]=\"PRINTER_LOCATION=\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[25]=\"PRINTER=3040\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[26]=\"PRINTER_STATE_REASONS=none\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[27]=\"CUPS_FILETYPE=document\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[28]=\"FINAL_CONTENT_TYPE=application/vnd.cups-raster\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] envp[29]=\"AUTH_INFO_REQUIRED=none\"
D [07/Jul/2021:08:18:47 +0300] [Job 10] Start rendering...
D [07/Jul/2021:08:18:47 +0300] [Job 10] Processing page 1...
D [07/Jul/2021:08:18:47 +0300] [Job 10] Error: /ioerror in --showpage--
D [07/Jul/2021:08:18:47 +0300] [Job 10] Operand stack:
D [07/Jul/2021:08:18:47 +0300] [Job 10] true   (/tmp/gs_HMsKom)   --nostringval--   1   true
D [07/Jul/2021:08:18:47 +0300] [Job 10] Execution stack:
D [07/Jul/2021:08:18:47 +0300] [Job 10] %interp_exit   .runexec2   --nostringval--   showpage   --nostringval--   2   %stopped_push   --nostringval--   showpage   showpage   false   1   %stopped_push   1990   2   3   %oparray_pop   1989   2   3   %oparray_pop   1977   2   3   %oparray_pop   showpage   1978   4   3   %oparray_pop   showpage   showpage   2   1   1   showpage   %for_pos_int_continue   1981   4   7   %oparray_pop   showpage   showpage   1840   3   9   %oparray_pop   showpage   showpage
D [07/Jul/2021:08:18:47 +0300] [Job 10] Dictionary stack:
D [07/Jul/2021:08:18:47 +0300] [Job 10] --dict:741/1123(ro)(G)--   --dict:1/20(G)--   --dict:80/200(L)--   --dict:80/200(L)--   --dict:133/256(ro)(G)--   --dict:320/325(ro)(G)--   --dict:33/64(L)--   --dict:6/9(L)--   --dict:6/20(L)--
D [07/Jul/2021:08:18:47 +0300] [Job 10] Current allocation mode is local
D [07/Jul/2021:08:18:47 +0300] [Job 10] Last OS error: Broken pipe
D [07/Jul/2021:08:18:47 +0300] [Job 10] GPL Ghostscript 9.53.3: Unrecoverable error, exit code 1
D [07/Jul/2021:08:18:47 +0300] [Job 10] Rendering completed
D [07/Jul/2021:08:18:47 +0300] [Job 10] PID 5841 (/usr/lib/cups/filter/gstoraster) stopped with status 1.
D [07/Jul/2021:08:18:47 +0300] [Job 10] Hint: Try setting the LogLevel to "debug" to find out more.
D [07/Jul/2021:08:18:47 +0300] [Job 10] Read thread still active, aborting the pending read...
D [07/Jul/2021:08:18:47 +0300] [Job 10] PID 5843 (/usr/lib/cups/backend/usb) exited with no errors.
D [07/Jul/2021:08:18:47 +0300] [Job 10] End of messages
D [07/Jul/2021:08:18:47 +0300] [Job 10] printer-state=3(idle)
D [07/Jul/2021:08:18:47 +0300] [Job 10] printer-state-message="Rendering completed"
D [07/Jul/2021:08:18:47 +0300] [Job 10] printer-state-reasons=none
Lesjar
() автор топика
Ответ на: комментарий от anonymous

Это было выполнено. Теперь, ошибка следующая:

Остановлено «libstdc++.so.6: cannot open shared object file: No such file or directory»

/var/log/cups/error_log 

E [10/Jul/2021:05:54:21 +0300] Missing value on line 46 of /var/cache/cups/job.cache.
E [10/Jul/2021:07:06:11 +0300] Missing value on line 46 of /var/cache/cups/job.cache.
E [10/Jul/2021:07:06:14 +0300] Missing value on line 46 of /var/cache/cups/job.cache.
E [10/Jul/2021:07:09:49 +0300] [CGI] ippfind (PID 13527) stopped with status 1!
E [10/Jul/2021:07:09:49 +0300] [cups-deviced] PID 13518 (driverless) stopped with status 1!
E [10/Jul/2021:07:10:43 +0300] [Job 24] libstdc++.so.6: cannot open shared object file: No such file or directory
E [10/Jul/2021:07:10:44 +0300] [Job 24] Unable to open raster stream - : Broken pipe
E [10/Jul/2021:07:10:52 +0300] [Job 24] Job stopped due to filter errors; please consult the /var/log/cups/error_log file for details.
D [10/Jul/2021:07:10:52 +0300] [Job 24] The following messages were recorded from 07:10:43 to 07:10:52
D [10/Jul/2021:07:10:52 +0300] [Job 24] Applying default options...
D [10/Jul/2021:07:10:52 +0300] [Job 24] Adding start banner page "none".
D [10/Jul/2021:07:10:52 +0300] [Job 24] Queued on "via-cups-Xerox_Phaser_3010" by "...".
D [10/Jul/2021:07:10:52 +0300] [Job 24] Auto-typing file...
D [10/Jul/2021:07:10:52 +0300] [Job 24] Request file type is application/pdf.
D [10/Jul/2021:07:10:52 +0300] [Job 24] File of type application/pdf queued by "...".
D [10/Jul/2021:07:10:52 +0300] [Job 24] Adding end banner page "none".
D [10/Jul/2021:07:10:52 +0300] [Job 24] time-at-processing=1625890243
D [10/Jul/2021:07:10:52 +0300] [Job 24] 3 filters for job:
D [10/Jul/2021:07:10:52 +0300] [Job 24] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [10/Jul/2021:07:10:52 +0300] [Job 24] gstoraster (application/vnd.cups-pdf to application/vnd.cups-raster, cost 99)
D [10/Jul/2021:07:10:52 +0300] [Job 24] xrhr1ap (application/vnd.cups-raster to printer/via-cups-Xerox_Phaser_3010, cost 0)
D [10/Jul/2021:07:10:52 +0300] [Job 24] job-sheets=none,none
D [10/Jul/2021:07:10:52 +0300] [Job 24] argv[0]="via-cups-Xerox_Phaser_3010"
D [10/Jul/2021:07:10:52 +0300] [Job 24] argv[1]="24"
D [10/Jul/2021:07:10:52 +0300] [Job 24] argv[2]="..."
D [10/Jul/2021:07:10:52 +0300] [Job 24] argv[3]="Без имени 1"
D [10/Jul/2021:07:10:52 +0300] [Job 24] argv[4]="1"
D [10/Jul/2021:07:10:52 +0300] [Job 24] argv[5]="PageSize=A4 job-uuid=urn:uuid:48ea0e32-f445-3cdc-4d84-73c24ff61a03 job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1625890243 time-at-processing=1625890243 document-name-supplied=R769Dn"
D [10/Jul/2021:07:10:52 +0300] [Job 24] argv[6]="/var/spool/cups/d00024-001"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc-root"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[7]="CUPS_STATEDIR=/run/cups"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[8]="HOME=/var/spool/cups/tmp"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[10]="SERVER_ADMIN=root@dom"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[11]="SOFTWARE=CUPS/2.3.3op2"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[13]="USER=root"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[14]="CUPS_MAX_MESSAGE=2047"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[15]="CUPS_SERVER=/run/cups/cups.sock"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[17]="IPP_PORT=631"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[18]="CHARSET=utf-8"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[19]="LANG=ru_RU.UTF-8"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[20]="PPD=/etc/cups/ppd/via-cups-Xerox_Phaser_3010.ppd"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[21]="RIP_MAX_CACHE=128m"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[22]="CONTENT_TYPE=application/pdf"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[23]="DEVICE_URI=usb://Xerox/Phaser%203010?serial=3196736246"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[24]="PRINTER_INFO=via-cups-Xerox Phaser 3010"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[25]="PRINTER_LOCATION="
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[26]="PRINTER=via-cups-Xerox_Phaser_3010"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[27]="PRINTER_STATE_REASONS=none"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[28]="CUPS_FILETYPE=document"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[29]="FINAL_CONTENT_TYPE=application/vnd.cups-raster"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[30]="AUTH_I****"
D [10/Jul/2021:07:10:52 +0300] [Job 24] Started filter /usr/lib/cups/filter/pdftopdf (PID 13741)
D [10/Jul/2021:07:10:52 +0300] [Job 24] Started filter /usr/lib/cups/filter/gstoraster (PID 13742)
D [10/Jul/2021:07:10:52 +0300] [Job 24] Started filter /usr/lib/cups/filter/xrhr1ap (PID 13743)
D [10/Jul/2021:07:10:52 +0300] [Job 24] Started backend /usr/lib/cups/backend/usb (PID 13744)
D [10/Jul/2021:07:10:52 +0300] [Job 24] Loading USB quirks from \"/usr/share/cups/usb\".
D [10/Jul/2021:07:10:52 +0300] [Job 24] Loaded 98 quirks.
D [10/Jul/2021:07:10:52 +0300] [Job 24] Printing on printer with URI: usb://Xerox/Phaser%203010?serial=3196736246
D [10/Jul/2021:07:10:52 +0300] [Job 24] OUTFORMAT=\"<none>\", so output format will be CUPS/PWG Raster
D [10/Jul/2021:07:10:52 +0300] [Job 24] libusb_get_device_list=11
D [10/Jul/2021:07:10:52 +0300] [Job 24] STATE: +connecting-to-device
D [10/Jul/2021:07:10:52 +0300] [Job 24] STATE: -connecting-to-device
D [10/Jul/2021:07:10:52 +0300] [Job 24] Printer found with device ID: MFG:Xerox;CMD:HBPL;MDL:Phaser 3010;CLS:Printer;DES:Xerox Phaser 3010;STS:JwAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAQAaBAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA; Device URI: usb://Xerox/Phaser%203010?serial=3196736246

Lesjar
() автор топика
Ответ на: комментарий от Lesjar

error_log part2

/var/log/cups/error_log part2 

D [10/Jul/2021:07:10:52 +0300] [Job 24] Device protocol: 2
D [10/Jul/2021:07:10:52 +0300] [Job 24] Printer does not like usblp kernel module to be re-attached after job
D [10/Jul/2021:07:10:52 +0300] [Job 24] pdftopdf: Last filter determined by the PPD: xrhr1ap; FINAL_CONTENT_TYPE: application/vnd.cups-raster => pdftopdf will not log pages in page_log.
D [10/Jul/2021:07:10:52 +0300] [Job 24] Отправка данных на принтер.
D [10/Jul/2021:07:10:52 +0300] [Job 24] Set job-printer-state-message to "Отправка данных на принтер.", current level=INFO
D [10/Jul/2021:07:10:52 +0300] [Job 24] PDF interactive form and annotation flattening done via QPDF
D [10/Jul/2021:07:10:52 +0300] [Job 24] PID 13741 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [10/Jul/2021:07:10:52 +0300] [Job 24] Color Manager: Calibration Mode/Off
D [10/Jul/2021:07:10:52 +0300] [Job 24] Calling FindDeviceById(cups-via-cups-Xerox_Phaser_3010)
D [10/Jul/2021:07:10:52 +0300] [Job 24] Found device /org/freedesktop/ColorManager/devices/cups_via_cups_Xerox_Phaser_3010
D [10/Jul/2021:07:10:52 +0300] [Job 24] Calling org.freedesktop.ColorManager.Device.Get(ProfilingInhibitors)
D [10/Jul/2021:07:10:52 +0300] [Job 24] Calling FindDeviceById(cups-via-cups-Xerox_Phaser_3010)
D [10/Jul/2021:07:10:52 +0300] [Job 24] Found device /org/freedesktop/ColorManager/devices/cups_via_cups_Xerox_Phaser_3010
D [10/Jul/2021:07:10:52 +0300] [Job 24] Calling GetProfileForQualifiers(Gray.Plain.600dpi...)
D [10/Jul/2021:07:10:52 +0300] [Job 24] Found profile /org/freedesktop/ColorManager/profiles/via_cups_Xerox_Phaser_3010_Gray__
D [10/Jul/2021:07:10:52 +0300] [Job 24] Calling org.freedesktop.ColorManager.Profile.Get(Filename)
D [10/Jul/2021:07:10:52 +0300] [Job 24] Use profile filename: \'\'
D [10/Jul/2021:07:10:52 +0300] [Job 24] Color Manager: ICC Profile: 
D [10/Jul/2021:07:10:52 +0300] [Job 24] Ghostscript using Any-Part-of-Pixel method to fill paths.
D [10/Jul/2021:07:10:52 +0300] [Job 24] Ghostscript command line: gs -dQUIET -dSAFER -dNOPAUSE -dBATCH -dNOINTERPOLATE -dNOMEDIAATTRS -dShowAcroForm -sstdout=%stderr -sOutputFile=%stdout -sDEVICE=cups -sMediaType=Plain -r600x600 -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -dcupsBitsPerColor=8 -dcupsColorOrder=0 -dcupsColorSpace=0 -scupsPageSizeName=A4 -I/usr/share/cups/fonts -c \'<</.HWMargins[11.620000 11.620000 11.619995 11.619995] /Margins[0 0]>>setpagedevice\' -f -_
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[0]=\"CUPS_CACHEDIR=/var/cache/cups\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[1]=\"CUPS_DATADIR=/usr/share/cups\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[2]=\"CUPS_DOCROOT=/usr/share/cups/doc-root\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[3]=\"CUPS_FONTPATH=/usr/share/cups/fonts\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[4]=\"CUPS_REQUESTROOT=/var/spool/cups\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[5]=\"CUPS_SERVERBIN=/usr/lib/cups\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[6]=\"CUPS_SERVERROOT=/etc/cups\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[7]=\"CUPS_STATEDIR=/run/cups\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[8]=\"HOME=/var/spool/cups/tmp\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[9]=\"PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[10]=\"SERVER_ADMIN=root@dom\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[11]=\"SOFTWARE=CUPS/2.3.3op2\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[12]=\"USER=root\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[13]=\"CUPS_MAX_MESSAGE=2047\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[14]=\"CUPS_SERVER=/run/cups/cups.sock\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[15]=\"CUPS_ENCRYPTION=IfRequested\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[16]=\"IPP_PORT=631\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[17]=\"CHARSET=utf-8\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[18]=\"LANG=ru_RU.UTF-8\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[19]=\"PPD=/etc/cups/ppd/via-cups-Xerox_Phaser_3010.ppd\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[20]=\"RIP_MAX_CACHE=128m\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[21]=\"CONTENT_TYPE=application/pdf\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[22]=\"DEVICE_URI=usb://Xerox/Phaser%203010?serial=3196736246\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[23]=\"PRINTER_INFO=via-cups-Xerox Phaser 3010\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[24]=\"PRINTER_LOCATION=\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[25]=\"PRINTER=via-cups-Xerox_Phaser_3010\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[26]=\"PRINTER_STATE_REASONS=none\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[27]=\"CUPS_FILETYPE=document\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[28]=\"FINAL_CONTENT_TYPE=application/vnd.cups-raster\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] envp[29]=\"AUTH_INFO_REQUIRED=none\"
D [10/Jul/2021:07:10:52 +0300] [Job 24] InitDllInterface()...
D [10/Jul/2021:07:10:52 +0300] [Job 24] Set job-printer-state-message to "libstdc++.so.6: cannot open shared object file: No such file or directory", current level=ERROR
D [10/Jul/2021:07:10:52 +0300] [Job 24] PID 13743 (/usr/lib/cups/filter/xrhr1ap) stopped with status 1.
D [10/Jul/2021:07:10:52 +0300] [Job 24] Hint: Try setting the LogLevel to "debug" to find out more.
D [10/Jul/2021:07:10:52 +0300] [Job 24] Sent 0 bytes...
D [10/Jul/2021:07:10:52 +0300] [Job 24] Start rendering...
D [10/Jul/2021:07:10:52 +0300] [Job 24] Processing page 1...
D [10/Jul/2021:07:10:52 +0300] [Job 24] Error: /ioerror in --showpage--
D [10/Jul/2021:07:10:52 +0300] [Job 24] Operand stack:
D [10/Jul/2021:07:10:52 +0300] [Job 24] true   (/tmp/gs_DJxiPU)   --nostringval--   1   true
D [10/Jul/2021:07:10:52 +0300] [Job 24] Execution stack:
D [10/Jul/2021:07:10:52 +0300] [Job 24] %interp_exit   .runexec2   --nostringval--   showpage   --nostringval--   2   %stopped_push   --nostringval--   showpage   showpage   false   1   %stopped_push   1990   2   3   %oparray_pop   1989   2   3   %oparray_pop   1977   2   3   %oparray_pop   showpage   1978   4   3   %oparray_pop   showpage   showpage   2   1   1   showpage   %for_pos_int_continue   1981   4   7   %oparray_pop   showpage   showpage   1840   3   9   %oparray_pop   showpage   showpage
D [10/Jul/2021:07:10:52 +0300] [Job 24] Dictionary stack:
D [10/Jul/2021:07:10:52 +0300] [Job 24] --dict:741/1123(ro)(G)--   --dict:1/20(G)--   --dict:80/200(L)--   --dict:80/200(L)--   --dict:133/256(ro)(G)--   --dict:320/325(ro)(G)--   --dict:33/64(L)--   --dict:6/9(L)--   --dict:6/20(L)--
D [10/Jul/2021:07:10:52 +0300] [Job 24] Current allocation mode is local
D [10/Jul/2021:07:10:52 +0300] [Job 24] Last OS error: Broken pipe
D [10/Jul/2021:07:10:52 +0300] [Job 24] GPL Ghostscript 9.53.3: Unrecoverable error, exit code 1
D [10/Jul/2021:07:10:52 +0300] [Job 24] Rendering completed
D [10/Jul/2021:07:10:52 +0300] [Job 24] PID 13742 (/usr/lib/cups/filter/gstoraster) stopped with status 1.
D [10/Jul/2021:07:10:52 +0300] [Job 24] Hint: Try setting the LogLevel to "debug" to find out more.
D [10/Jul/2021:07:10:52 +0300] [Job 24] Waiting for read thread to exit...
D [10/Jul/2021:07:10:52 +0300] [Job 24] Read thread still active, aborting the pending read...
D [10/Jul/2021:07:10:52 +0300] [Job 24] PID 13744 (/usr/lib/cups/backend/usb) exited with no errors.
D [10/Jul/2021:07:10:52 +0300] [Job 24] End of messages
D [10/Jul/2021:07:10:52 +0300] [Job 24] printer-state=3(idle)
D [10/Jul/2021:07:10:52 +0300] [Job 24] printer-state-message="Rendering completed"
D [10/Jul/2021:07:10:52 +0300] [Job 24] printer-state-reasons=none

Lesjar
() автор топика

Честно говоря нахрен эти Xerox. У них вечно проблемы с родными драйверами, ибо поддержка забивает на их обновление сразу же. Чего только стоит их МФУ, где из официальных драйверов работает только принтерная часть.

По сабжу, пробуй драйвера от Самсунга, раньше ксераксы были переделанными Самсунгами. Теперь не знаю.

Upd. Но опенпррнтинг говорят что работает драйвер опенсорсный foo2hbpl2.

Upd2. На Лоре нашел что будет работать foo2zjs.

einhander ★★★★★
()
Последнее исправление: einhander (всего исправлений: 3)

У меня тот же принтер, последние годы с родными драйверами стали постоянно вылазить какие то проблемы. Ушел на foo2zjs. Все отлично.

sergio1204 ★★★
()

Заработал с проприетарным драйвером. Список исполненных танцев: 

sudo dpkg --add-architecture i386
sudo apt install libc6-i386
sudo ln -s /usr/lib/xrhr1acl.so /usr/lib/xrhr3acl.so
sudo dpkg -i libstdc++6_10.2.1-6_amd64.deb
sudo apt install lib32stdc++6

Свободные драйверы попробую установить чуть позже.

Lesjar
() автор топика
18 ноября 2021 г.
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.
← PCI Passthrough + LinuxMint 20 + KVM
Linux-hardware
60hz на 144hz мониторе →