LINUX.ORG.RU

История изменений

Исправление iZEN, (текущая версия) : 


===>>> Waiting for background 'make clean' processes to finish

===>>> pkg-message for nvidia-driver-440.31
On install:
To use these drivers, make sure that you have loaded the NVidia kernel
module, by doing

        # kldload nvidia        (or nvidia-modeset, see below)

or adding

        nvidia_load="YES"       (or nvidia-modeset_load="YES", see below)

to /boot/loader.conf, or putting ``nvidia'' (or ``nvidia-modeset'', see
below again) on ``kld_list'' variable in /etc/rc.conf.

If you build this port with FreeBSD AGP GART driver, make sure you have
agp.ko kernel module installed and loaded, since nvidia.ko will depend
on it, or have your kernel compiled with "device agp".  Otherwise, the
NVidia kernel module will not load.  Also, please set correct value for
``Option "NvAGP"'' in ``Device'' section of your X11 configuration file.

When building with Linux compatibility support, make sure that linux.ko
module is available as well (or have it compiled in kernel).  It can be
loaded via /boot/loader.conf, or later in the boot process if you add

===>>> The following actions were performed:
	Upgrade of aom-1.0.0.2605 to aom-1.0.0.2607
	Upgrade of re2-20190701_1 to re2-20191101
	Upgrade of texinfo-6.7,1 to texinfo-6.7_1,1
	Installation of devel/libtool (libtool-2.4.6_1)
	Upgrade of jbig2dec-0.16 to jbig2dec-0.17
	Upgrade of py36-pyparsing-2.4.1.1 to py36-pyparsing-2.4.2
	Upgrade of celluloid-0.17 to celluloid-0.18
	Installation of textproc/gsed (gsed-4.7)
	Upgrade of nvidia-driver-430.50 to nvidia-driver-440.31
	Upgrade of sourcesanspro-ttf-2.045_1 to sourcesanspro-ttf-3.006
	Upgrade of sourceserifpro-ttf-3.000 to sourceserifpro-ttf-3.001

Исходная версия iZEN, :

Последнее обновление

[code]===>>> Waiting for background ‘make clean’ processes to finish

===>>> pkg-message for nvidia-driver-440.31 On install: To use these drivers, make sure that you have loaded the NVidia kernel module, by doing

    # kldload nvidia        (or nvidia-modeset, see below)

or adding

    nvidia_load="YES"       (or nvidia-modeset_load="YES", see below)

to /boot/loader.conf, or putting nvidia'' (ornvidia-modeset'', see below again) on ``kld_list'' variable in /etc/rc.conf.

If you build this port with FreeBSD AGP GART driver, make sure you have agp.ko kernel module installed and loaded, since nvidia.ko will depend on it, or have your kernel compiled with «device agp». Otherwise, the NVidia kernel module will not load. Also, please set correct value for Option "NvAGP"'' inDevice'' section of your X11 configuration file.

When building with Linux compatibility support, make sure that linux.ko module is available as well (or have it compiled in kernel). It can be loaded via /boot/loader.conf, or later in the boot process if you add

===>>> The following actions were performed: Upgrade of aom-1.0.0.2605 to aom-1.0.0.2607 Upgrade of re2-20190701_1 to re2-20191101 Upgrade of texinfo-6.7,1 to texinfo-6.7_1,1 Installation of devel/libtool (libtool-2.4.6_1) Upgrade of jbig2dec-0.16 to jbig2dec-0.17 Upgrade of py36-pyparsing-2.4.1.1 to py36-pyparsing-2.4.2 Upgrade of celluloid-0.17 to celluloid-0.18 Installation of textproc/gsed (gsed-4.7) Upgrade of nvidia-driver-430.50 to nvidia-driver-440.31 Upgrade of sourcesanspro-ttf-2.045_1 to sourcesanspro-ttf-3.006 Upgrade of sourceserifpro-ttf-3.000 to sourceserifpro-ttf-3.001[/code]