ноутбук - связь через LPT

modprobe parport_pc io=0x378 irq=7
modprobe plip
ifconfig plip0 192.168.0.1 pointopoint 192.168.0.2
-------
modprobe parport_pc io=0x378 irq=7
modprobe plip
ifconfig plip0 192.168.0.2 pointopoint 192.168.0.1
ping 192.168.0.1

а кабель какой?Один к одному?

Читать /#ftp:ftp.chg.ru/.1/Linux/HOWTO/mini/PLIP;/#ftp:ftp.chg.ru/.1/Linux/HOWTO/Plip-Install-HOWTO
Цитата
The hardware required to set up a PLIP interface is (obviously) a free
parallel port in both the machines and the cable. If you can configure
it with your BIOS, set it at least as "bi-directional", but if
possible in ECP or EPP mode.

About the cable, this is what is written in the plip.c file, in the
kernel 2.0.33 source:


The cable used is a de facto standard parallel null cable -- sold as
a "LapLink" cable by various places. You'll need a 12-conductor cable to
make one yourself. The wiring is:
SLCTIN 17 - 17
GROUND 25 - 25
D0->ERROR 2 - 15 15 - 2
D1->SLCT 3 - 13 13 - 3
D2->PAPOUT 4 - 12 12 - 4
D3->ACK 5 - 10 10 - 5
D4->BUSY 6 - 11 11 - 6
Do not connect the other pins. They are
D5,D6,D7 are 7,8,9
STROBE is 1, FEED is 14, INIT is 16
extra grounds are 18,19,20,21,22,23,24



But I strongly advice you to read the
/usr/src/linux/drivers/net/README1.PLIP and README2.PLIP files for
more info about the cable.

У всем спасибо... усе работает.... :) вот теперече достойный терминаальчик............... ?) Trofik