LINUX.ORG.RU
решено Форум — General  

Не подключается Wi-Fi Arch Linux

 , ,


0

1

Всем привет. Собственно сабж. Модуль ядра загружен: 

# lsmod
Module                  Size  Used by
8188eu                613553  0
Активирую девайс: http://pastebin.com/CNfJVLR0 Какие-то ошибки вроде есть, но кажется ничего серьезного. И делаю так: 
netctl start wireless-wpa
Job for netctl@wireless\x2dwpa.service failed because the control process exited with error code.
See "systemctl status "netctl@wireless\\x2dwpa.service"" and "journalctl -xe" for details.
Указанные команды не дают ничего вразумительного. Что может быть? Вот, кстати, профиль netclt: 
Description='A simple WPA encrypted wireless connection'
Interface=wlan0
Connection=wireless

Security=wpa
IP=dhcp

ESSID='Логин'
Key='Пароль'



Последнее исправление: cetjs2 (всего исправлений: 4)

See «systemctl status „netctl@wireless\\x2dwpa.service“» and «journalctl -xe» for details.

Смотрел тут?

Пробуй wpa_supplicant, если это совсем никак.

xndr
()
Ответ на: комментарий от anonymous

Я через терминал по serial тыркаюсь, не запускается

dossalab
() автор топика
Ответ на: комментарий от xndr

Что то такое: 

* netctl@wireless\x2dwpa.service - Networking for netctl profile wireless-wpa
   Loaded: loaded (/usr/lib/systemd/system/netctl@.service; static; vendor preset: disabled)
   Active: failed (Result: exit-code) since Wed 2017-02-01 01:11:48 UTC; 16s ago
     Docs: man:netctl.profile(5)
  Process: 123 ExecStart=/usr/lib/network/network start %I (code=exited, status=1/FAILURE)
 Main PID: 123 (code=exited, status=1/FAILURE)

Feb 01 01:11:47 alarm systemd[1]: Starting Networking for netctl profile wireless-wpa...
Feb 01 01:11:48 alarm network[123]: Starting network profile 'wireless-wpa'...
Feb 01 01:11:48 alarm network[123]: The interface of network profile 'wireless-wpa' is already up
Feb 01 01:11:48 alarm systemd[1]: netctl@wireless\x2dwpa.service: Main process exited, code=exited, status=1/FAILURE
Feb 01 01:11:48 alarm systemd[1]: Failed to start Networking for netctl profile wireless-wpa.
Feb 01 01:11:48 alarm systemd[1]: netctl@wireless\x2dwpa.service: Unit entered failed state.
Feb 01 01:11:48 alarm systemd[1]: netctl@wireless\x2dwpa.service: Failed with result 'exit-code'.

dossalab
() автор топика
Ответ на: комментарий от m101

Ну, вроде бы все в порядке: 

ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN group default 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
2: tunl0: <NOARP> mtu 1480 qdisc noop state DOWN group default 
    link/ipip 0.0.0.0 brd 0.0.0.0
3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 00:79:05:03:43:df brd ff:ff:ff:ff:ff:ff

dossalab
() автор топика
Ответ на: комментарий от redby

Подробней, если можно. я тк понял, что пароль надо прогнать через wpa_passphrase, и указать netctl результат?

dossalab
() автор топика
Ответ на: комментарий от m101

Тогда вот так идет: 

* netctl@wireless\x2dwpa.service - Networking for netctl profile wireless-wpa
   Loaded: loaded (/usr/lib/systemd/system/netctl@.service; static; vendor preset: disabled)
   Active: failed (Result: exit-code) since Wed 2017-02-01 01:30:50 UTC; 47s ago
     Docs: man:netctl.profile(5)
  Process: 148 ExecStart=/usr/lib/network/network start %I (code=exited, status=1/FAILURE)
 Main PID: 148 (code=exited, status=1/FAILURE)

Feb 01 01:30:50 alarm systemd[1]: Starting Networking for netctl profile wireless-wpa...
Feb 01 01:30:50 alarm network[148]: Starting network profile 'wireless-wpa'...
Feb 01 01:30:50 alarm network[148]: You need to install 'wpa_supplicant'
Feb 01 01:30:50 alarm network[148]: The WPA supplicant did not start for interface 'wlan0'
Feb 01 01:30:50 alarm network[148]: Failed to bring the network up for profile 'wireless-wpa'
Feb 01 01:30:50 alarm systemd[1]: netctl@wireless\x2dwpa.service: Main process exited, code=exited, status=1/FAILURE
Feb 01 01:30:50 alarm systemd[1]: Failed to start Networking for netctl profile wireless-wpa.
Feb 01 01:30:50 alarm systemd[1]: netctl@wireless\x2dwpa.service: Unit entered failed state.
Feb 01 01:30:50 alarm systemd[1]: netctl@wireless\x2dwpa.service: Failed with result 'exit-code'.
wpa-supplicant достать я не могу, машинка на arm и без интернета

dossalab
() автор топика
Ответ на: комментарий от m101

Вот попытка подключится к открытой(Первый лог - адаптер включен, второй - выключен): 

* netctl@wireless\x2dopen.service - Networking for netctl profile wireless-open
   Loaded: loaded (/usr/lib/systemd/system/netctl@.service; static; vendor preset: disabled)
   Active: failed (Result: exit-code) since Wed 2017-02-01 01:13:45 UTC; 28s ago
     Docs: man:netctl.profile(5)
  Process: 137 ExecStart=/usr/lib/network/network start %I (code=exited, status=1/FAILURE)
 Main PID: 137 (code=exited, status=1/FAILURE)

Feb 01 01:13:45 alarm systemd[1]: Starting Networking for netctl profile wireless-open...
Feb 01 01:13:45 alarm network[137]: Starting network profile 'wireless-open'...
Feb 01 01:13:45 alarm network[137]: The interface of network profile 'wireless-open' is already up
Feb 01 01:13:45 alarm systemd[1]: netctl@wireless\x2dopen.service: Main process exited, code=exited, status=1/FAILURE
Feb 01 01:13:45 alarm systemd[1]: Failed to start Networking for netctl profile wireless-open.
Feb 01 01:13:45 alarm systemd[1]: netctl@wireless\x2dopen.service: Unit entered failed state.
Feb 01 01:13:45 alarm systemd[1]: netctl@wireless\x2dopen.service: Failed with result 'exit-code'.
* netctl@wireless\x2dopen.service - Networking for netctl profile wireless-open
   Loaded: loaded (/usr/lib/systemd/system/netctl@.service; static; vendor preset: disabled)
   Active: failed (Result: exit-code) since Wed 2017-02-01 01:15:01 UTC; 5s ago
     Docs: man:netctl.profile(5)
  Process: 153 ExecStart=/usr/lib/network/network start %I (code=exited, status=1/FAILURE)
 Main PID: 153 (code=exited, status=1/FAILURE)

Feb 01 01:15:01 alarm systemd[1]: Starting Networking for netctl profile wireless-open...
Feb 01 01:15:01 alarm network[153]: Starting network profile 'wireless-open'...
Feb 01 01:15:01 alarm network[153]: You need to install 'wpa_supplicant'
Feb 01 01:15:01 alarm network[153]: The WPA supplicant did not start for interface 'wlan0'
Feb 01 01:15:01 alarm network[153]: Failed to bring the network up for profile 'wireless-open'
Feb 01 01:15:01 alarm systemd[1]: netctl@wireless\x2dopen.service: Main process exited, code=exited, status=1/FAILURE
Feb 01 01:15:01 alarm systemd[1]: Failed to start Networking for netctl profile wireless-open.
Feb 01 01:15:01 alarm systemd[1]: netctl@wireless\x2dopen.service: Unit entered failed state.
Feb 01 01:15:01 alarm systemd[1]: netctl@wireless\x2dopen.service: Failed with result 'exit-code'.

dossalab
() автор топика

В целом, все решилось элементарно. Выкинул Arch, на его место нашел rootfs с Raspberry Pi. Через iw элементарно все подключилось. Всем спасибо за помощь!

dossalab
() автор топика
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.
General