LINUX.ORG.RU
решено Форум — General  

device not accepting address 3, error -32

 


0

1

Через USB подключены мышь,клавиатура и 3G-модем.При входе в Linux нужно переключать USB-кабеля в другие порты,чтобы работало.

Материнская плата : Gigabyte 970A-DS3P

Ядро : Debian 3.16.0-4-amd64

yangus@freedom:~$ lsusb
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 004: ID 248a:8566  
Bus 006 Device 005: ID 04f3:0103 Elan Microelectronics Corp. ActiveJet K-2024 Multimedia Keyboard
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 006: ID 12d1:1506 Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard
Bus 002 Device 002: ID 2109:3431  
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

dmesg 

 ---
[    2.101344] usb 6-1: new low-speed USB device number 2 using ohci-pci
[    2.131439] usb 6-1: New USB device found, idVendor=04f3, idProduct=0103
[    2.131443] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.134512] hidraw: raw HID events driver (C) Jiri Kosina
[    2.143439] usbhid 6-1:1.0: can't add hid device: -32
[    2.143603] usbhid: probe of 6-1:1.0 failed with error -32
[    2.153419] usbhid 6-1:1.1: can't add hid device: -32
[    2.153583] usbhid: probe of 6-1:1.1 failed with error -32
[    2.153606] usbcore: registered new interface driver usbhid
[    2.153607] usbhid: USB HID core driver
---
[    2.809898] usb 6-2: device not accepting address 3, error -32
[    2.945981] usb 6-2: new full-speed USB device number 4 using ohci-pci
[    2.989091] usb 6-2: New USB device found, idVendor=248a, idProduct=8566
[    2.989095] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.989097] usb 6-2: Product: Wireless Receiver
[    2.989098] usb 6-2: Manufacturer: Telink
---
[  227.571329] usb 6-1: USB disconnect, device number 2
[  238.518395] usb 9-3: new low-speed USB device number 2 using ohci-pci
[  238.549534] usb 9-3: New USB device found, idVendor=04f3, idProduct=0103
[  238.549546] usb 9-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  238.551531] usb 9-3: can't set config #1, error -32
[  244.953142] usb 9-3: USB disconnect, device number 2
[  247.569029] usb 9-2: new low-speed USB device number 3 using ohci-pci
[  247.599175] usb 9-2: New USB device found, idVendor=04f3, idProduct=0103
[  247.599186] usb 9-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
---

Deleted

[   82.140190] usb 6-1: USB disconnect, device number 2
[   84.093343] usb 9-3: new low-speed USB device number 2 using ohci-pci
[   84.501640] usb 9-3: device not accepting address 2, error -32
[   84.637745] usb 9-3: new low-speed USB device number 3 using ohci-pci
[   85.046044] usb 9-3: device not accepting address 3, error -32
[   85.182140] usb 9-3: new low-speed USB device number 4 using ohci-pci
[   85.322227] usb 9-3: device descriptor read/64, error -32
[   85.795673] usb 9-3: New USB device found, idVendor=04f3, idProduct=0103
[   85.795678] usb 9-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Deleted
() 
yangus@freedom:~$ lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B) (rev 02)
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port B)
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port D)
00:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port H)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller (rev 40)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 630] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
02:00.0 USB controller: VIA Technologies, Inc. Device 3483 (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
Deleted
()
Ответ на: комментарий от Deleted

Удалось восстановить нормальную работу USB-клавиатуры и 3G-модема с помощью BIOS.

Legacy USB Support: auto;
Port 64 Emolution: disable;
Deleted
()
Ответ на: комментарий от Deleted

Нужно IOMMU:Enable

/*Как не странно, но именно ЛОР учит решать проблемы самостоятельно*/

Deleted
()
Вы не можете добавлять комментарии в эту тему. Тема перемещена в архив.
General