Поставил стабильный Дебиан. Сходу родное разрешение 1980✕1020 не подхватилось. В krandrtray максимальное разрешение 1600✕1200.
Карточка Intel HD Graphics 2000
hwinfo --gfxcard
10: PCI 02.0: 0300 VGA compatible controller (VGA)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_8086_102
Unique ID: _Znp.6NVYXK7UjQ2
SysFS ID: /devices/pci0000:00/0000:00:02.0
SysFS BusID: 0000:00:02.0
Hardware Class: graphics card
Model: "Intel VGA compatible controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x0102
SubVendor: pci 0x103c "Hewlett-Packard Company"
SubDevice: pci 0x2abf
Revision: 0x09
Memory Range: 0xfe000000-0xfe3fffff (rw,non-prefetchable)
Memory Range: 0xc0000000-0xcfffffff (rw,prefetchable)
I/O Ports: 0xf000-0xf03f (rw)
IRQ: 11 (no events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v00008086d00000102sv0000103Csd00002ABFbc03sc00i00"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Сгенерировал при помощи Xorg -configure xorg.conf. Там по умолчанию стоял драйвер vesa. Поменял на intel. Иксы не старатнули.
Лог:
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.13.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
(II) Primary Device is: PCI 00@00:02:0
(EE) No devices detected.
Fatal server error:
no screens found
Вернул обратно vesa. Впсиал в Xorg.conf
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
Разрешение не изменилось. Лог:
II) VESA(0): Total Memory: 1023 64KB banks (65472kB)
(II) VESA(0): Monitor0: Using hsync range of 24.00-94.00 kHz
(II) VESA(0): Monitor0: Using vrefresh range of 50.00-76.00 Hz
(II) VESA(0): Monitor0: Using maximum pixel clock of 175.00 MHz
(II) VESA(0): Not using mode "1920x1080" (no mode of this name)
(--) VESA(0): Virtual size is 1600x1200 (pitch 1600)
(**) VESA(0): Built-in mode "1600x1200"
Добавил в конфиг modeline. В итоге он получился следующим:
cat /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Module"
Load "dri"
Load "dri2"
Load "dbe"
Load "record"
Load "glx"
Load "extmod"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
Mode "1920x1080"
DotClock 141.45
HTimings 1920 2032 2232 2544
VTimings 1080 1081 1084 1112
Flags "-HSync" "+Vsync"
EndMode
EndSection
Section "Device"
Identifier "Card0"
Driver "vesa"
VendorName "Intel Corporation"
BoardName "Sandy Bridge Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
Результат нулевой, в логе появились строчки с modline:
(II) VESA(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
(II) VESA(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) VESA(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) VESA(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) VESA(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) VESA(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz)
(II) VESA(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) VESA(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) VESA(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
(II) VESA(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
(II) VESA(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) VESA(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
но дальше снова
(II) VESA(0): Not using mode "1920x1080" (no mode of this name)
Куда копать дальше? В тестинг за свежеми дровами закапываться не хочется.
